ADS1232IPWR
24-bit Delta-Sigma Analog-to-Digital ConverterThe ADS1232IPWR is a 24-bit delta-sigma analog-to-digital converter from Texas Instruments. View the full ADS1232IPWR datasheet below including electrical characteristics, absolute maximum ratings.
Manufacturer
Texas Instruments
Category
24-bit Delta-Sigma Analog-to-Digital Converter
Package
TSSOP-24
Overview
Part: ADS1232, ADS1234 — Texas Instruments
Type: 24-bit Delta-Sigma Analog-to-Digital Converter
Description: The ADS123x is a precise 24-bit Delta-Sigma ADC with a low-noise programmable gain amplifier (PGA), offering 19.2-bit noise-free resolution and 23.5-bit effective resolution, designed as a complete front-end solution for bridge sensor applications.
Operating Conditions:
- Supply voltage: 2.7V to 5.3V
- Operating temperature: -40°C to +105°C
- Data rate: 10SPS or 80SPS
Absolute Maximum Ratings:
- Max supply voltage: 6V (AVDD to AGND, DVDD to DGND)
- Max junction/storage temperature: +150°C
Key Specs:
- Noise-free resolution: 19.2 bits (Gain = 64, 10SPS)
- Effective resolution: 23.5 bits (Gain = 1, 10SPS)
- RMS Noise: 17nV (Gain = 128, 10SPS)
- Common-mode rejection: 100 dB (fIN = 50 Hz or 60 Hz, VCM = 0.5V to AVDD-0.5V)
- Power-supply rejection: 90 dB (Gain = 1, ΔV = 0.1V, f = 50 Hz or 60 Hz)
- Input bias current: 10 nA (TA = 25°C)
- Supply current: 1.5 mA (AVDD = 5V, DVDD = 5V, 10SPS, Internal Clock)
- Internal oscillator accuracy: ±1% (TA = 25°C)
Features:
- Complete front-end for bridge sensors
- 19.2-bit noise-free resolution (Gain = 64)
- 23.5-bit effective resolution (Gain = 1)
- Low-noise PGA with 1, 2, 64, and 128 selectable gains
- 100dB simultaneous 50Hz and 60Hz rejection
- Flexible clock: low-drift internal oscillator or optional external crystal
- Selectable 10SPS or 80SPS data rates
- Simple ratiometric measurements with external voltage reference up to 5V
- Dual-channel differential input with internal temperature sensor (ADS1232)
- Quad-channel differential input (ADS1234)
- Two-wire serial interface
Applications:
- Weigh scales
- PLC weight modules
- Pressure sensors
Package:
- TSSOP-24 (ADS1232)
- TSSOP-28 (ADS1234)
Pin Configuration
Not to scale
图 5-2. ADS1234 PW Package, 28-Pin TSSOP, Top View
Electrical Characteristics
minimum and maximum specifications apply from TA = -40°C to +105°C; typical specifications are at T A = 25°C; all specifications are at AVDD = DVDD = V(REFP) = 5 V, V(REFN) = AGND, and fCLK = 4.9152 MHz (unless otherwise noted)
| PARAMETER | PARAMETER | TEST CONDITIONS | MIN | TYP | MAX | UNIT |
|---|---|---|---|---|---|---|
| ANALOG INPUTS | ANALOG INPUTS | ANALOG INPUTS | ANALOG INPUTS | ANALOG INPUTS | ANALOG INPUTS | ANALOG INPUTS |
| Differential input current | Gain = 1 | ±3 | nA | |||
| Differential input current | Gain = 2 | ±6 | nA | |||
| Differential input current | Gain = 64, 128 | ±3.5 | nA | |||
| SYSTEM PERFORMANCE | SYSTEM PERFORMANCE | SYSTEM PERFORMANCE | SYSTEM PERFORMANCE | SYSTEM PERFORMANCE | SYSTEM PERFORMANCE | SYSTEM PERFORMANCE |
| Resolution | No missing codes | 24 | Bits | |||
| f DATA | Data rate | Internal oscillator, SPEED = high | 78 | 80 | 82.4 | |
| f DATA | Data rate | Internal oscillator, SPEED = low | 9.75 | 10 | 10.3 | SPS |
| f DATA | Data rate | External oscillator, SPEED = high | f CLK | / 61,440 | SPS | |
| f DATA | Data rate | External oscillator, SPEED = low | f CLK / | 491,520 | SPS | |
| Digital filter settling time | Full settling, readings synchronized with A0, A1 pins | 4 | Conversions | |||
| INL | Integral nonlinearity | Differential input, end-point fit, gain = 1, 2 | - 0.001 | ±0.0002 | 0.001 | %of FSR (1) |
| INL | Integral nonlinearity | Differential input, end-point fit, gain = 64, 128 | ±0.0004 | |||
| Input offset error (2) | Gain = 1 | - 5 | ±0.2 | 5 | ppm of FS | |
| Input offset error (2) | Gain = 128 | - 1 | ±0.02 | 1 | ||
| Input offset drift | Gain = 1 | ±0.3 | μV/°C | |||
| Input offset drift | Gain = 128 | ±10 | nV/°C | |||
| Gain error (3) | Gain = 1 | - 0.02 | ±0.001 | 0.02 | % | |
| Gain = 128 | - 0.1 | ±0.01 | 0.1 | |||
| Gain drift | Gain = 1 | ±0.2 | ppm/°C | |||
| Gain drift | Gain = 128 | ±2.5 | ppm/°C | |||
| NMRR | Normal-mode rejection ratio (4) | Internal oscillator, f DATA = 10 SPS f IN = 50 Hz or 60 Hz, ±1 Hz | 100 | 110 | dB | |
| NMRR | Normal-mode rejection ratio (4) | External oscillator, f DATA = 10 SPS f IN = 50 Hz or 60 Hz, ±1 Hz | 120 | 130 | dB | |
| CMRR | Common-mode rejection ratio | At DC, gain = 1, Δ V = 1 V, V CM = AVDD / 2 | 95 | 110 | dB | |
| CMRR | Common-mode rejection ratio | At DC, gain = 128, Δ V = 0.1 V, V CM = AVDD / 2 | 95 | 110 | dB | |
| e n | Input-referred noise | See the Noise Performance section | See the Noise Performance section | See the Noise Performance section | ||
| PSRR | Power-supply rejection | AVDD, at DC, gain = 1, Δ V = 1 V | 85 | dB | ||
| PSRR | Power-supply rejection | AVDD, at DC, gain = 128, Δ V = 0.1 V | 100 | 120 | dB | |
| VOLTAGE REFERENCE INPUT | VOLTAGE REFERENCE INPUT Input current | VOLTAGE REFERENCE INPUT | VOLTAGE REFERENCE INPUT | VOLTAGE REFERENCE INPUT 10 | VOLTAGE REFERENCE INPUT | VOLTAGE REFERENCE INPUT nA |
| DIGITAL LOGIC LEVELS | DIGITAL LOGIC LEVELS | DIGITAL LOGIC LEVELS | DIGITAL LOGIC LEVELS | DIGITAL LOGIC LEVELS | DIGITAL LOGIC LEVELS | DIGITAL LOGIC LEVELS |
| V IH | High-level input voltage | 0.7 DVDD | V | |||
| V IL | Low-level input voltage | 0.2 DVDD | V | |||
| V OH | High-level output voltage | I OH = 1 mA | DVDD - 0.4 | V | ||
| V OL | Low-level output voltage | I OL = 1 mA | 0.2 DVDD | V | ||
| Input leakage current | 0 V < V IN < DVDD | - 10 | 10 | μA |
Absolute Maximum Ratings
over operating ambient temperature range (unless otherwise noted) (1)
| MIN | MAX | UNIT | ||
|---|---|---|---|---|
| Power-supply voltage | AVDD to AGND | - 0.3 | 6 | V |
| Power-supply voltage | DVDD to DGND | - 0.3 | 6 | V |
| Power-supply voltage | AGND to DGND | - 0.3 | 0.3 | V |
| Analog input voltage | AINNx, AINPx, REFP, REFN | AGND - 0.3 | AVDD + 0.3 | V |
| Digital input voltage | A0, A1, CLKIN/XTAL1, XTAL2, DRDY/DOUT, GAIN0, GAIN1, PWDN, SCLK, SPEED | DGND - 0.3 | DVDD + 0.3 | V |
| Input current | Continuous, all pins except power-supply pins (2) | - 10 | 10 | mA |
| Temperature | Junction, T J | 150 | °C | |
| Temperature | Storage, T stg | - 60 | 150 | °C |
Recommended Operating Conditions
over operating ambient temperature range (unless otherwise noted)
| MIN | NOM | MAX | UNIT | |||
|---|---|---|---|---|---|---|
| POWER SUPPLY | POWER SUPPLY | POWER SUPPLY | ||||
| Analog power supply | AVDD to AGND | 2.7 | 5.3 | V | ||
| Digital power supply | DVDD to DGND | 2.7 | 5.3 | V | ||
| ANALOG INPUTS | ANALOG INPUTS | ANALOG INPUTS | ||||
| Full-scale input voltage | V (AINPx) - V (AINNx) | ±0.5 V REF / Gain | ±0.5 V REF / Gain | V | ||
| Common-mode input range | Gain = 1 and 2 | AGND - 0.1 | AVDD + 0.1 | V | ||
| Common-mode input range | Gain = 64 and 128 | AGND + 1.5 | AVDD - 1.5 | V | ||
| VOLTAGE REFERENCE INPUTS | VOLTAGE REFERENCE INPUTS | VOLTAGE REFERENCE INPUTS | ||||
| V REF | Voltage reference input | V REF = V (REFP) - V (REFN) | 1.5 | AVDD | AVDD + 0.1 | V |
| V (REFN) | Negative reference input | AGND - 0.1 | V (REFP) - 1.5 | V | ||
| V (REFP) | Positive reference input | V (REFN) + 1.5 | AVDD + 0.1 | V | ||
| EXTERNAL CLOCK INPUT | EXTERNAL CLOCK INPUT | EXTERNAL CLOCK INPUT | ||||
| f CLK | External clock frequency | 0.2 | 4.9152 | 8 | MHz | |
| SERIAL INTERFACE CLOCK INPUT | SERIAL INTERFACE CLOCK INPUT | SERIAL INTERFACE CLOCK INPUT | SERIAL INTERFACE CLOCK INPUT | SERIAL INTERFACE CLOCK INPUT | SERIAL INTERFACE CLOCK INPUT | SERIAL INTERFACE CLOCK INPUT |
| f (SCLK) | Serial clock frequency | 5 | MHz | |||
| DIGITAL INPUTS | DIGITAL INPUTS | DIGITAL INPUTS | DIGITAL INPUTS | DIGITAL INPUTS | DIGITAL INPUTS | DIGITAL INPUTS |
| Input voltage | DGND | DVDD + 0.1 | V | |||
| TEMPERATURE | TEMPERATURE | TEMPERATURE | TEMPERATURE | TEMPERATURE | TEMPERATURE | TEMPERATURE |
| T A | Operating ambient temperature | - 40 | 105 | °C |
Thermal Information
| THERMAL METRIC (1) | THERMAL METRIC (1) | ADS1232 PW (TSSOP) 24 PINS | ADS1234 PW (TSSOP) 28 PINS | UNIT |
|---|---|---|---|---|
| R θ JA | Junction-to-ambient thermal resistance | 82.4 | 74.3 | °C/W |
| R θ JC(top) | Junction-to-case (top) thermal resistance | 25.5 | 21.9 | °C/W |
| R θ JB | Junction-to-board thermal resistance | 38.1 | 32.9 | °C/W |
| ψ JT | Junction-to-top characterization parameter | 1.3 | 1.1 | °C/W |
| ψ JB | Junction-to-board characterization parameter | 37.6 | 32.4 | °C/W |
Typical Application
The ADS123x devices are high-resolution, 24-bit ADCs with an integrated low-noise PGA. Best performance is achieved by following the guidelines and recommendations described in the Typical Application section.
Ordering Information
| MPN | Package | Temperature Range | Packing |
|---|---|---|---|
| ADS1232IPWR | TSSOP-24 | -40°C to +105°C | Tape and Reel |
| ADS1234 | TSSOP-28 | -40°C to +105°C | null |
Related Variants
The following components are covered by the same datasheet.
| Part Number | Manufacturer | Package |
|---|---|---|
| ADS1232 | Texas Instruments | — |
| ADS1232IPW | Texas Instruments | — |
| ADS1232IPWG4 | Texas Instruments | — |
| ADS1234 | Texas Instruments | — |
| ADS123X | Texas Instruments | — |
Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.
Get structured datasheet data via API
Get started free