ADS1115IDYNR
Analog-to-Digital ConverterThe ADS1115IDYNR is a analog-to-digital converter from Texas Instruments. View the full ADS1115IDYNR datasheet below including electrical characteristics, absolute maximum ratings.
Manufacturer
Texas Instruments
Category
Analog-to-Digital Converter
Overview
Part: ADS1113, ADS1114, ADS1115 (ADS111x) from Texas Instruments
Type: 16-Bit Analog-to-Digital Converter (ADC)
Description: Precision, low-power, 16-bit, I2C-compatible ADCs with internal reference, oscillator, and programmable comparator (on some variants), offering data rates up to 860 SPS and a wide supply range of 2.0V to 5.5V.
Operating Conditions:
- Supply voltage: 2.0V to 5.5V
- Operating temperature: -40°C to +125°C
- Programmable data rate: 8SPS to 860SPS
- Full-scale input voltage range: ±0.256V to ±6.144V
Absolute Maximum Ratings:
- Max supply voltage: 7 V (VDD to GND)
- Max continuous current: 10 mA (Any pin except power supply pins)
- Max junction/storage temperature: 150 °C (Junction, Storage)
Key Specs:
- Resolution: 16 Bits (no missing codes)
- Data rate: 8 to 860 SPS
- Supply current (Operating): 150 μA (typ, at T A = 25°C)
- Integral nonlinearity (INL): 1 LSB (max, DR = 8SPS, FSR = ±2.048V)
- Offset error: ±1 LSB (typ, FSR = ±2.048V, differential inputs)
- Gain error: 0.01% (typ, FSR = ±2.048V, T A = 25°C)
- Common-mode rejection ratio (CMRR): 105 dB (typ, f CM = 60Hz, DR = 8SPS)
- Common-mode input impedance: 10 MΩ (typ, FSR = ±6.144V)
Features:
- Ultra-small packages
- Wide supply range: 2.0V to 5.5V
- Low current consumption: 150μA (continuous-conversion mode)
- Programmable data rate: 8SPS to 860SPS
- Single-cycle settling
- Internal low-drift voltage reference
- Internal oscillator
- I2C interface: four pin-selectable addresses
- Operating temperature range: -40°C to +125°C
Applications:
- Portable instrumentation
- Battery voltage and current monitoring
- Temperature measurement systems
- Consumer electronics
- Factory automation and process control
Package:
- RUG (X2QFN, 10-pin): 1.50mm × 2.00mm
- DYN (SOT, 10-pin): 2.90mm × 2.80mm
- DGS (VSSOP, 10-pin): 3.00mm × 4.90mm
Features
- Ultra-small packages:
- -X2QFN: 2mm × 1.5mm × 0.4mm
- -SOT: 2.9mm × 2.8mm × 0.6mm
- Wide supply range: 2.0V to 5.5V
- Low current consumption: 150μA (continuous-conversion mode)
- Programmable data rate: 8SPS to 860SPS
- Single-cycle settling
- Internal low-drift voltage reference
- Internal oscillator
- I 2 C interface: four pin-selectable addresses
- Operating temperature range:
- -40°C to +125°C
- Family of devices:
- -ADS1113: one single-ended (SE) or differential (DE) input
- -ADS1114: one single-ended or differential input with comparator and PGA
- -ADS1115: four single-ended or two differential inputs with comparator and PGA
Applications
- Portable instrumentation
- Battery voltage and current monitoring
- Temperature measurement systems
- Consumer electronics
- Factory automation and process control
Pin Configuration
Figure 4-1. RUG Package, 10-Pin (Top View)
Figure 4-2. DYN and DGS Packages, 10-Pin (Top View)
Table 4-1. Pin Functions: RUG, DYN, and DGS Packages
| PIN | PIN | PIN | PIN |
|---|---|---|---|
| NAME | ADS1113 | ADS1114 | ADS1115 |
| ADDR | 1 | 1 | 1 |
| AIN0 | 4 | 4 | 4 |
| AIN1 | 5 | 5 | 5 |
| AIN2 | - | - | 6 |
| AIN3 | - | - | 7 |
| ALERT/RDY | - | 2 | 2 |
| GND | 3 | 3 | 3 |
| NC | 2, 6, 7 | 6, 7 | - |
| SCL | 10 | 10 | 10 |
| SDA | 9 | 9 | 9 |
| VDD | 8 | 8 | 8 |
- (1) See the Unused Inputs and Outputs section for unused pin connections.
Electrical Characteristics
at VDD = 3.3V, data rate = 8SPS, and full-scale input voltage range (FSR) = ±2.048V (unless otherwise noted); maximum and minimum specifications apply from TA = -40°C to +125°C; typical specifications are at TA = 25°C
| PARAMETER | TEST CONDITIONS | MIN | TYP | MAX | UNIT | |
|---|---|---|---|---|---|---|
| ANALOG INPUT | ANALOG INPUT Common-mode input | ANALOG INPUT FSR = ±6.144V (1) FSR = ±4.096V (1) , FSR = ±2.048V | ANALOG INPUT | ANALOG INPUT 10 6 | ANALOG INPUT | ANALOG INPUT |
| impedance | FSR = ±1.024V FSR = ±0.512V, FSR = ±0.256V FSR = ±6.144V (1) FSR = ±4.096V (1) | 3 100 22 15 | MΩ | |||
| Differential input impedance | FSR = ±2.048V FSR = ±1.024V FSR = ±0.512V, ±0.256V | 4.9 2.4 710 | MΩ kΩ | |||
| SYSTEM PERFORMANCE | SYSTEM PERFORMANCE Resolution (no missing codes) | SYSTEM PERFORMANCE | SYSTEM PERFORMANCE 16 | SYSTEM PERFORMANCE | SYSTEM PERFORMANCE | SYSTEM PERFORMANCE Bits |
| DR | Data rate | 8, 16, 32, 64, 128, 250, 475, | 860 | SPS | ||
| Data rate variation | All data rates | -10% | 10% | |||
| Output noise | See Noise Performance section | See Noise Performance section | See Noise Performance section | See Noise Performance section | ||
| INL | Integral nonlinearity | DR = 8SPS, FSR = ±2.048V (2) | 1 | LSB | ||
| Offset error | FSR = ±2.048V, differential inputs FSR = ±2.048V, single-ended inputs | -3 | ±1 ±3 | 3 | LSB | |
| Offset drift over temperature | FSR = ±2.048V | 0.005 | LSB/°C | |||
| Long-term Offset drift | FSR = ±2.048V, T A = 125°C, 1000 hours | ±1 | LSB | |||
| Offset power-supply rejection | FSR = ±2.048V, DC supply variation | 1 | LSB/V | |||
| Offset channel match | Match between any two inputs | 3 | LSB | |||
| Gain error (3) | FSR = ±2.048V, T A = 25°C FSR = ±0.256V | 0.01% 7 | 0.15% | |||
| Gain drift over temperature (3) Long-term gain drift (3) Gain power-supply rejection | FSR = ±2.048V FSR = ±6.144V (1) FSR = ±2.048V, T A = 125°C, 1000 hours | 5 5 ±0.05% 80 | 40 | ppm/°C ppm/V | ||
| Gain match (3) | Match between any two gains | 0.02% | 0.1% | |||
| Gain channel match | Match between any two inputs At DC, FSR = ±0.256V At DC, FSR = ±2.048V | 0.05% 105 100 | 0.1% | |||
| CMRR | Common-mode rejection ratio | At DC, FSR = ±6.144V (1) f CM = 60Hz, DR = 8SPS f = 50Hz, DR = 8SPS CM | 90 105 105 | dB | ||
| DIGITAL INPUT/OUTPUT | DIGITAL INPUT/OUTPUT | DIGITAL INPUT/OUTPUT | DIGITAL INPUT/OUTPUT | DIGITAL INPUT/OUTPUT | DIGITAL INPUT/OUTPUT | DIGITAL INPUT/OUTPUT |
| V IH | High-level input voltage | 0.7 VDD | 5.5 | V | ||
| V IL | Low-level input voltage | GND | 0.3 VDD | V | ||
| V OL | Low-level output voltage | I OL = 3mA | GND | 0.15 | 0.4 | V |
| Input leakage current | GND < V DIG < VDD | -10 | 10 | μA |
Absolute Maximum Ratings
over operating ambient temperature range (unless otherwise noted) (1)
| MIN | MAX | UNIT | ||
|---|---|---|---|---|
| Power-supply voltage | VDD to GND | -0.3 | 7 | V |
| Analog input voltage | AIN0, AIN1, AIN2, AIN3 | GND - 0.3 | VDD + 0.3 | V |
| Digital input voltage | SDA, SCL, ADDR, ALERT/RDY | GND - 0.3 | 5.5 | V |
| Input current, continuous | Any pin except power supply pins | -10 | 10 | mA |
| Temperature | Operating ambient, T A | -40 | 125 | °C |
| Temperature | Junction, T J | -40 | 150 | °C |
| Temperature | Storage, T stg | -60 | 150 | °C |
Recommended Operating Conditions
| MIN | NOM | MAX | UNIT | ||
|---|---|---|---|---|---|
| POWER SUPPLY | POWER SUPPLY | ||||
| Power supply (VDD to GND) | 2 | 5.5 | V | ||
| ANALOG INPUTS (1) | ANALOG INPUTS (1) | ||||
| FSR | Full-scale input voltage range (2) (V IN = V (AINP) - V (AINN) ) | ±0.256 | ±6.144 | V | |
| V (AINx) | Absolute input voltage | GND | VDD | V | |
| DIGITAL INPUTS | DIGITAL INPUTS | ||||
| V DIG | Digital input voltage | GND | 5.5 | V | |
| TEMPERATURE | TEMPERATURE | ||||
| T A | Operating ambient temperature | -40 | 125 | °C |
Thermal Information
| THERMAL METRIC (1) | THERMAL METRIC (1) | RUG (X2QFN) 10 PINS | DYN (SOT) 10 PINS | DGS (VSSOP) 10 PINS | UNIT |
|---|---|---|---|---|---|
| R θJA | Junction-to-ambient thermal resistance | 245.2 | 147.1 | 182.7 | °C/W |
| R θJC(top) | Junction-to-case (top) thermal resistance | 69.3 | 59.3 | 67.2 | °C/W |
| R θJB | Junction-to-board thermal resistance | 172.0 | 71.3 | 103.8 | °C/W |
| ψ JT | Junction-to-top characterization parameter | 8.2 | 2.8 | 10.2 | °C/W |
| ψ JB | Junction-to-board characterization parameter | 170.8 | 70.4 | 102.1 | °C/W |
| R θJC(bot) | Junction-to-case (bottom) thermal resistance | N/A | N/A | N/A | °C/W |
Typical Application
The following sections give example circuits and suggestions for using the ADS111x in various situations.
Package Information
| PART NUMBER | PACKAGE (1) | PACKAGE SIZE (2) |
|---|---|---|
| ADS111x | RUG (X2QFN, 10) | 1.50mm × 2.00mm |
| ADS111x | DYN (SOT, 10) | 2.90mm × 2.80mm |
| ADS111x | DGS (VSSOP, 10) | 3.00mm × 4.90mm |
- (1) For more information, see Section 14.
- (2) The package size (length × width) is a nominal value and includes pins, where applicable.
Related Variants
The following components are covered by the same datasheet.
| Part Number | Manufacturer | Package |
|---|---|---|
| ADS1113 | Texas Instruments | — |
| ADS1114 | Texas Instruments | — |
| ADS1115 | Texas Instruments | X2QFN-10 |
| ADS1115-Q1 | Texas Instruments | — |
| ADS1115IDGSR | Texas Instruments | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) |
| ADS1115IDGSR.A | Texas Instruments | — |
| ADS1115IDGSR.B | Texas Instruments | — |
| ADS1115IDGST | Texas Instruments | — |
| ADS1115IDGST.A | Texas Instruments | — |
| ADS1115IDGST.B | Texas Instruments | — |
| ADS1115IRUGR | Texas Instruments | — |
| ADS1115IRUGR.A | Texas Instruments | — |
| ADS1115IRUGR.B | Texas Instruments | — |
| ADS1115IRUGT | Texas Instruments | — |
| ADS1115IRUGT.A | Texas Instruments | — |
| ADS1115IRUGT.B | Texas Instruments | — |
| ADS111X | Texas Instruments | — |
Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.
Get structured datasheet data via API
Get started free