Skip to main content

We use cookies to understand how you use our site and improve your experience. See our Privacy Policy.

AD9215BRUZ-80

10-Bit Pipelined Analog-to-Digital Converter

The AD9215BRUZ-80 is a 10-bit pipelined analog-to-digital converter from Analog Devices. View the full AD9215BRUZ-80 datasheet below including key specifications, absolute maximum ratings.

AD9215BRUZ-80 shares its datasheet with AD9215, whose page lists every part number it covers.

Official AD9215BRUZ-80 datasheet (PDF) — the source this page was extracted from.

Manufacturer

Analog Devices

Category

10-Bit Pipelined Analog-to-Digital Converter

Package

RU-28

AD9215BRUZ-80 Key Specifications

ParameterValue
PackagingTray
Standard Pack Qty490
Resolution10 bits, no missing codes guaranteed
SNR (25 °C, Nyquist)58.5 dB typ (65/80 MSPS grades); 58.0 dB typ (105 MSPS grade)
ENOB (25 °C, Nyquist)9.5 bits typ (65/80 MSPS grades); 9.4 bits typ (105 MSPS grade)
Worst harmonic (25 °C, Nyquist)-78 dBc typ (65/80 MSPS grades); -75 dBc typ (105 MSPS grade)
DNL±0.5 LSB typ (65/80 MSPS grades); ±0.6 LSB typ (105 MSPS grade)
INL±0.5 LSB typ (65/80 MSPS grades); ±0.65 LSB typ (105 MSPS grade)
Analog bandwidth300 MHz typ
IAVDD32 mA typ at 65 MSPS, 40 mA typ at 105 MSPS (AVDD = 3 V)
Core power96 mW at 65 MSPS, 104 mW at 80 MSPS, 120 mW at 105 MSPS
Standby power1.0 mW typ
Pipeline latency5 cycles
Aperture jitter0.5 ps rms

AD9215BRUZ-80 Overview

Part: AD9215 — Analog Devices

Type: 10-Bit Pipelined Analog-to-Digital Converter (ADC)

Description: 10-bit, 65/80/105 MSPS single 3 V supply (2.7–3.3 V) ADC with on-chip reference and SHA, SNR of about 58 dB at Nyquist and 96–120 mW core power.

Operating Conditions:

  • Supply voltage: AVDD 2.7–3.3 V; DRVDD 2.25–3.6 V
  • Operating temperature: -40 to +85 °C
  • Conversion rate: 5 MSPS minimum; 65, 80 or 105 MSPS maximum depending on speed grade
  • Analog input span: 1 V p-p (VREF = 0.5 V) or 2 V p-p (VREF = 1.0 V)

Absolute Maximum Ratings:

  • AVDD to AGND: -0.3 to +3.9 V
  • DRVDD to DRGND: -0.3 to +3.9 V
  • Digital outputs to DRGND: -0.3 V to DRVDD + 0.3 V
  • VIN+, VIN-, CLK, MODE, VREF, SENSE, REFB, REFT, PDWN to AGND: -0.3 V to AVDD + 0.3 V
  • Junction temperature: 150 °C
  • Storage temperature: -65 to +150 °C
  • Lead temperature (10 sec): 300 °C

Key Specs:

  • Resolution: 10 bits, no missing codes guaranteed
  • SNR (25 °C, Nyquist): 58.5 dB typ (65/80 MSPS grades); 58.0 dB typ (105 MSPS grade)
  • ENOB (25 °C, Nyquist): 9.5 bits typ (65/80 MSPS grades); 9.4 bits typ (105 MSPS grade)
  • Worst harmonic (25 °C, Nyquist): -78 dBc typ (65/80 MSPS grades); -75 dBc typ (105 MSPS grade)
  • DNL: ±0.5 LSB typ (65/80 MSPS grades); ±0.6 LSB typ (105 MSPS grade)
  • INL: ±0.5 LSB typ (65/80 MSPS grades); ±0.65 LSB typ (105 MSPS grade)
  • Analog bandwidth: 300 MHz typ
  • IAVDD: 32 mA typ at 65 MSPS, 40 mA typ at 105 MSPS (AVDD = 3 V)
  • Core power: 96 mW at 65 MSPS, 104 mW at 80 MSPS, 120 mW at 105 MSPS
  • Standby power: 1.0 mW typ
  • Pipeline latency: 5 cycles
  • Aperture jitter: 0.5 ps rms

Features:

  • Single 3 V supply operation (2.7–3.3 V)
  • Separate digital output driver supply for 2.5 V and 3.3 V logic
  • Differential input with 300 MHz bandwidth
  • On-chip reference and sample-and-hold amplifier
  • Flexible analog input: 1 V p-p to 2 V p-p range
  • Clock duty cycle stabilizer
  • Offset binary or twos complement data format
  • Out-of-range (OR) output indicator
  • Pin compatible with 12- and 14-bit ADC family members

Applications:

  • Ultrasound equipment
  • IF sampling in communications receivers
  • Battery-powered instruments
  • Hand-held scopemeters
  • Low cost digital oscilloscopes

Package:

  • 28-lead TSSOP (RU), θJA = 67.7 °C/W
  • 32-lead LFCSP (CP), θJA = 32.7 °C/W

AD9215BRUZ-80 Features

Single 3 V supply operation (2.7 V to 3.3 V) SNR = 58 dBc (to Nyquist) SFDR = 77 dBc (to Nyquist) Low power ADC core: 96 mW at 65 MSPS, 104 mW @ 80 MSPS, 120 mW at 105 MSPS Differential input with 300 MHz bandwidth On-chip reference and sample-and-hold amplifier DNL = ±0.25 LSB Offset binary or twos complement data format

Flexible analog input: 1 V p-p to 2 V p-p range Clock duty cycle stabilizer

AD9215BRUZ-80 Applications

Ultrasound equipment IF sampling in communications receivers Battery-powered instruments Hand-held scopemeters Low cost digital oscilloscopes

AD9215BRUZ-80 Pin Configuration

AD9215BRUZ-80 Absolute Maximum Ratings

Table 5.

MnemonicWith Respect toMinMaxUnit
ELECTRICAL
AVDDAGND-0.3+3.9V
DRVDDDRGND-0.3+3.9V
AGNDDRGND-0.3+0.3V
AVDDDRVDD-3.9+3.9V
Digital OutputsDRGND-0.3DRVDD + 0.3V
CLK, MODEAGND-0.3AVDD + 0.3V
VIN+, VIN-AGND-0.3AVDD + 0.3V
VREFAGND-0.3AVDD + 0.3V
SENSEAGND-0.3AVDD + 0.3V
REFB, REFTAGND-0.3AVDD + 0.3V
PDWNAGND-0.3AVDD + 0.3V
ENVIRONMENTAL 2ENVIRONMENTAL 2
Operating TemperatureOperating Temperature-40+85°C
Junction TemperatureJunction Temperature150°C
Lead Temperature (10 sec)Lead Temperature (10 sec)300°C
Storage TemperatureStorage Temperature-65+150°C

Variants on the same datasheet

These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.

Part NumberManufacturerPackage
AD9215Analog DevicesRU-28
AD9215-105Analog Devices—
AD9215-65Analog Devices—
AD9215BCPAnalog Devices—
AD9215BCP-105Analog Devices—
AD9215BCP-65Analog Devices—
AD9215BCP-80Analog Devices—
AD9215BCPZ-105Analog DevicesCP-32-7
AD9215BCPZ-65Analog DevicesCP-32-7
AD9215BCPZ-80Analog DevicesCP-32-7
AD9215BRU-105Analog Devices—
AD9215BRU-65Analog Devices—
AD9215BRU-80Analog Devices—
AD9215BRUZ-105Analog DevicesRU-28
AD9215BRUZ-65Analog DevicesRU-28

More datasheets

All Analog Devices datasheets (757)

Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Ask your AI agent about the AD9215BRUZ-80

Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.

claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp

Then ask: "Can the AD9215BRUZ-80 run from my 12 V rail? Check it against the datasheet limits."

Create a free account $2 of usage every month, no card needed.