AD9215
10-Bit Pipelined Analog-to-Digital ConverterThe AD9215 is a 10-bit pipelined analog-to-digital converter from Analog Devices. View the full AD9215 datasheet below including key specifications, pinout, absolute maximum ratings.
Official AD9215 datasheet (PDF) — the source this page was extracted from.
AD9215 Key Specifications
| Parameter | Value |
|---|---|
| Packaging | Tray |
| Standard Pack Qty | 490 |
| DNL | ±0.25 LSB |
| SNR | 58 dBc (to Nyquist) |
| SFDR | 77 dBc (to Nyquist) |
| Resolution | 10 bits |
| Sample Rate | 65/80/105 MSPS |
| Output Format | Offset binary or twos complement |
| Standby Power | 1.0 mW |
| Analog Input Span | 1 V p-p to 2 V p-p differential |
| Operating Temperature | -40°C to +85°C |
| Analog Input Bandwidth | 300 MHz |
| Power Consumption (Core) | 96 mW at 65 MSPS, 104 mW at 80 MSPS, 120 mW at 105 MSPS |
| Analog Supply Voltage (AVDD) | 2.7V to 3.3V |
| Digital Driver Supply (DRVDD) | 2.25V to 3.6V |
AD9215 Overview
Part: AD9215 — Analog Devices
Type: 10-Bit Pipelined Analog-to-Digital Converter (ADC)
Description: 10-bit, 65/80/105 MSPS single 3 V supply (2.7–3.3 V) ADC with on-chip reference and SHA, SNR of about 58 dB at Nyquist and 96–120 mW core power.
Operating Conditions:
- Supply voltage: AVDD 2.7–3.3 V; DRVDD 2.25–3.6 V
- Operating temperature: -40 to +85 °C
- Conversion rate: 5 MSPS minimum; 65, 80 or 105 MSPS maximum depending on speed grade
- Analog input span: 1 V p-p (VREF = 0.5 V) or 2 V p-p (VREF = 1.0 V)
Absolute Maximum Ratings:
- AVDD to AGND: -0.3 to +3.9 V
- DRVDD to DRGND: -0.3 to +3.9 V
- Digital outputs to DRGND: -0.3 V to DRVDD + 0.3 V
- VIN+, VIN-, CLK, MODE, VREF, SENSE, REFB, REFT, PDWN to AGND: -0.3 V to AVDD + 0.3 V
- Junction temperature: 150 °C
- Storage temperature: -65 to +150 °C
- Lead temperature (10 sec): 300 °C
Key Specs:
- Resolution: 10 bits, no missing codes guaranteed
- SNR (25 °C, Nyquist): 58.5 dB typ (65/80 MSPS grades); 58.0 dB typ (105 MSPS grade)
- ENOB (25 °C, Nyquist): 9.5 bits typ (65/80 MSPS grades); 9.4 bits typ (105 MSPS grade)
- Worst harmonic (25 °C, Nyquist): -78 dBc typ (65/80 MSPS grades); -75 dBc typ (105 MSPS grade)
- DNL: ±0.5 LSB typ (65/80 MSPS grades); ±0.6 LSB typ (105 MSPS grade)
- INL: ±0.5 LSB typ (65/80 MSPS grades); ±0.65 LSB typ (105 MSPS grade)
- Analog bandwidth: 300 MHz typ
- IAVDD: 32 mA typ at 65 MSPS, 40 mA typ at 105 MSPS (AVDD = 3 V)
- Core power: 96 mW at 65 MSPS, 104 mW at 80 MSPS, 120 mW at 105 MSPS
- Standby power: 1.0 mW typ
- Pipeline latency: 5 cycles
- Aperture jitter: 0.5 ps rms
Features:
- Single 3 V supply operation (2.7–3.3 V)
- Separate digital output driver supply for 2.5 V and 3.3 V logic
- Differential input with 300 MHz bandwidth
- On-chip reference and sample-and-hold amplifier
- Flexible analog input: 1 V p-p to 2 V p-p range
- Clock duty cycle stabilizer
- Offset binary or twos complement data format
- Out-of-range (OR) output indicator
- Pin compatible with 12- and 14-bit ADC family members
Applications:
- Ultrasound equipment
- IF sampling in communications receivers
- Battery-powered instruments
- Hand-held scopemeters
- Low cost digital oscilloscopes
Package:
- 28-lead TSSOP (RU), θJA = 67.7 °C/W
- 32-lead LFCSP (CP), θJA = 32.7 °C/W
AD9215 Features
Single 3 V supply operation (2.7 V to 3.3 V) SNR = 58 dBc (to Nyquist) SFDR = 77 dBc (to Nyquist) Low power ADC core: 96 mW at 65 MSPS, 104 mW @ 80 MSPS, 120 mW at 105 MSPS Differential input with 300 MHz bandwidth On-chip reference and sample-and-hold amplifier DNL = ±0.25 LSB Offset binary or twos complement data format
Flexible analog input: 1 V p-p to 2 V p-p range Clock duty cycle stabilizer
AD9215 Applications
Ultrasound equipment IF sampling in communications receivers Battery-powered instruments Hand-held scopemeters Low cost digital oscilloscopes
AD9215 Pin Configuration
| Pin | Name | Type | Description |
|---|---|---|---|
| 1 | OR | - | Out-of-Range Indicator. |
| 2 | MODE | - | Data Format and Clock Duty Cycle Stabilizer (DCS) Mode Selection. |
| 3 | SENSE | - | Reference Mode Selection. |
| 4 | VREF | - | Voltage Reference Input/Output. |
| 5 | REFB | - | Differential Reference (Negative). |
| 6 | REFT | - | Differential Reference (Positive). |
| 7 | AVDD | - | Analog Power Supply. |
| 8 | AGND | - | Analog Ground. |
| 9 | VIN+ | - | Analog Input Pin (+). |
| 10 | VIN- | - | Analog Input Pin (-). |
| 11 | AGND | - | Analog Ground. |
| 12 | AVDD | - | Analog Power Supply. |
| 13 | CLK | - | Clock Input Pin. |
| 14 | PDWN | - | Power-Down Function Selection (Active High). |
| 15 | DNC | - | Do not connect, recommend floating this pin. |
| 16 | DNC | - | Do not connect, recommend floating this pin. |
| 17 | D0 (LSB) | - | Data Output Bits. |
| 18 | D1 | - | Data Output Bits. |
| 19 | D2 | - | Data Output Bits. |
| 20 | D3 | - | Data Output Bits. |
| 21 | D4 | - | Data Output Bits. |
| 22 | D5 | - | Data Output Bits. |
| 23 | DRGND | - | Digital Output Ground. |
| 24 | DRVDD | - | Digital Output Driver Supply. Must be decoupled to DRGND with a minimum 0.1 µF capacitor. Recommended decoupling is 0.1 µF in parallel with 10 µF. |
| 25 | D6 | - | Data Output Bits. |
| 26 | D7 | - | Data Output Bits. |
| 27 | D8 | - | Data Output Bits. |
| 28 | D9 (MSB) | - | Data Output Bits. |
AD9215 Absolute Maximum Ratings
Table 5.
| Mnemonic | With Respect to | Min | Max | Unit |
|---|---|---|---|---|
| ELECTRICAL | ||||
| AVDD | AGND | -0.3 | +3.9 | V |
| DRVDD | DRGND | -0.3 | +3.9 | V |
| AGND | DRGND | -0.3 | +0.3 | V |
| AVDD | DRVDD | -3.9 | +3.9 | V |
| Digital Outputs | DRGND | -0.3 | DRVDD + 0.3 | V |
| CLK, MODE | AGND | -0.3 | AVDD + 0.3 | V |
| VIN+, VIN- | AGND | -0.3 | AVDD + 0.3 | V |
| VREF | AGND | -0.3 | AVDD + 0.3 | V |
| SENSE | AGND | -0.3 | AVDD + 0.3 | V |
| REFB, REFT | AGND | -0.3 | AVDD + 0.3 | V |
| PDWN | AGND | -0.3 | AVDD + 0.3 | V |
| ENVIRONMENTAL 2 | ENVIRONMENTAL 2 | |||
| Operating Temperature | Operating Temperature | -40 | +85 | °C |
| Junction Temperature | Junction Temperature | 150 | °C | |
| Lead Temperature (10 sec) | Lead Temperature (10 sec) | 300 | °C | |
| Storage Temperature | Storage Temperature | -65 | +150 | °C |
AD9215 Ordering Information
| Ordering Code | Temperature Range | Package Description | Package Option |
|---|---|---|---|
| AD9215BRUZ-65 | -40°C to +85°C | 28-Lead Thin Shrink Small Outline Package (TSSOP) | RU-28 |
| AD9215BRUZ-80 | -40°C to +85°C | 28-Lead Thin Shrink Small Outline Package (TSSOP) | RU-28 |
| AD9215BRUZ-105 | -40°C to +85°C | 28-Lead Thin Shrink Small Outline Package (TSSOP) | RU-28 |
| AD9215BRUZRL7-65 | -40°C to +85°C | 28-Lead Thin Shrink Small Outline Package (TSSOP) | RU-28 |
| AD9215BRUZRL7-80 | -40°C to +85°C | 28-Lead Thin Shrink Small Outline Package (TSSOP) | RU-28 |
| AD9215BRUZRL7-105 | -40°C to +85°C | 28-Lead Thin Shrink Small Outline Package (TSSOP) | RU-28 |
| AD9215BCPZ-65 | -40°C to +85°C | 32-Lead Lead Frame Chip Scale Package (LFCSP_WQ) | CP-32-7 |
| AD9215BCPZ-80 | -40°C to +85°C | 32-Lead Lead Frame Chip Scale Package (LFCSP_WQ) | CP-32-7 |
| AD9215BCPZ-105 | -40°C to +85°C | 32-Lead Lead Frame Chip Scale Package (LFCSP_WQ) | CP-32-7 |
Variants on the same datasheet
These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.
| Part Number | Manufacturer | Package |
|---|---|---|
| AD9215-105 | Analog Devices | — |
| AD9215-65 | Analog Devices | — |
| AD9215BCP | Analog Devices | — |
| AD9215BCP-105 | Analog Devices | — |
| AD9215BCP-65 | Analog Devices | — |
| AD9215BCP-80 | Analog Devices | — |
| AD9215BCPZ-105 | Analog Devices | CP-32-7 |
| AD9215BCPZ-65 | Analog Devices | CP-32-7 |
| AD9215BCPZ-80 | Analog Devices | CP-32-7 |
| AD9215BRU-105 | Analog Devices | — |
| AD9215BRU-65 | Analog Devices | — |
| AD9215BRU-80 | Analog Devices | — |
| AD9215BRUZ-105 | Analog Devices | RU-28 |
| AD9215BRUZ-65 | Analog Devices | RU-28 |
| AD9215BRUZ-80 | Analog Devices | RU-28 |
More datasheets
Ask your AI agent about the AD9215
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the AD9215 run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.