Skip to main content

We use cookies to understand how you use our site and improve your experience. See our Privacy Policy.

AD8366ACPZ-R7

Dual Digital Variable Gain Amplifier

The AD8366ACPZ-R7 is a dual digital variable gain amplifier from Analog Devices. View the full AD8366ACPZ-R7 datasheet below including key specifications.

AD8366ACPZ-R7 shares its datasheet with AD8366, whose page lists every part number it covers.

Official AD8366ACPZ-R7 datasheet (PDF) — the source this page was extracted from.

Manufacturer

Analog Devices

Category

Dual Digital Variable Gain Amplifier

Lifecycle

Production (Last Updated: 19 hours ago)

AD8366ACPZ-R7 Key Specifications

ParameterValue
-3db Bandwidth600 MHz
Bandwidth600 MHz
Case/PackageLFCSP EP
Contact PlatingTin
Gain16 dB
Gain Bandwidth Product600 MHz
Height800 µm
Lead FreeContains Lead
Lifecycle StatusProduction (Last Updated: 19 hours ago)
Manufacturer Lifecycle StatusPRODUCTION (Last Updated: 19 hours ago)
Max Operating Temperature85 °C
Max Supply Voltage5.5 V
Min Operating Temperature-40 °C
Min Supply Voltage4.5 V
MountSurface Mount
Noise Figure11.4 dB
Nominal Supply Current180 mA
Number of Channels2
Number of Circuits2
Number of Pins32
Operating Supply Current180 mA
Operating Supply Voltage5 V
RoHSCompliant
Slew Rate1100 V/µs

AD8366ACPZ-R7 Overview

Part: AD8366 — Analog Devices

Type: Dual Digital Variable Gain Amplifier (VGA)

Description: Matched pair of differential, digitally controlled VGAs with 4.5 dB to 20.25 dB gain range in 0.25 dB steps, 600 MHz 3 dB bandwidth, and single 5 V supply operation.

Operating Conditions:

  • Supply voltage: 4.75–5.25 V
  • Operating temperature: -40 to +85 °C
  • Input common-mode voltage: 1.5 V minimum, defaults to VPOS/2
  • Output common-mode voltage: 1.6–3 V (HD2/HD3 better than -90 dBc at 2 V p-p output), defaults to VPOS/2

Absolute Maximum Ratings:

  • Max supply voltage (VPSIx, VPSOx): 5.5 V
  • Internal power dissipation: 1.4 W
  • Max junction temperature: 150 °C
  • Storage temperature: -65 to +150 °C
  • Lead temperature (soldering, 60 sec): 300 °C

Key Specs:

  • Gain range: 4.5 to 20.25 dB, 0.25 dB step, step accuracy ±0.25 dB (VS = 5 V, TA = 25 °C, 200 Ω source and load)
  • Bandwidth: 600 MHz (3 dB), 200 MHz (1 dB), all gain codes
  • Noise figure at 10 MHz: 11.4 dB at maximum gain, 18 dB at minimum gain
  • HD2/HD3 at 10 MHz, 2 V p-p output: -97/-97 dBc at maximum gain, -96/-90 dBc at minimum gain
  • OIP3 at 10 MHz (2 V p-p composite): 38 dBVrms at maximum gain, 36 dBVrms at minimum gain
  • Differential input impedance: 217 Ω; differential output impedance: 28 Ω
  • Linear output swing: 6 V p-p (1 dB compression)
  • Total supply current: 180 mA typical (ENBL = 5 V); disable current 3.2 mA
  • SPI clock: up to 44.4 MHz

Features:

  • Matched pair of differential, digitally controlled VGAs
  • Differential input and output
  • Adjustable output common-mode via VCMA/VCMB
  • Optional dc output offset correction loop
  • Serial (SPI) or parallel gain control
  • Power-down feature
  • Single 5 V supply operation

Applications:

  • Baseband I/Q receivers
  • Diversity receivers
  • Wideband ADC drivers

Package:

  • 32-lead exposed paddle LFCSP (θJA 45.4 °C/W with pad soldered to board)

AD8366ACPZ-R7 Features

Matched pair of differential, digitally controlled VGAs Gain range: 4.5 dB to 20.25 dB

0.25 dB gain step size Operating frequency DC to 150 MHz (2 V p-p) 3 dB bandwidth: 600 MHz Noise figure (NF) 11.4 dB at 10 MHz at maximum gain 18 dB at 10 MHz at minimum gain OIP3: 45 dBm at 10 MHz HD2/HD3 Better than -90 dBc for 2 V p-p output at 10 MHz at

maximum gain

Differential input and output Adjustable output common-mode Optional dc output offset correction Serial/parallel mode gain control Power-down feature Single 5 V supply operation

AD8366ACPZ-R7 Applications

Baseband I/Q receivers Diversity receivers

Wideband ADC drivers

AD8366ACPZ-R7 Pin Configuration

Figure 4. Pin Configuration

Table 3. Pin Function Descriptions

Pin No.MnemonicDescription
1, 8, 13, 28VPSIA, VPSIB, VPSOB, VPSOAInput and Output Stage Positive Supply Voltage (4.75V to 5.25 V).
2, 3, 6, 7IPPA, IPMA, IPMB, IPPBDifferential Inputs.
4ENBLChip Enable. Pull this pin high to enable.
5, 20ICOM,OCOMInput and Output Ground Pins. Connect these pins via the lowest possible impedance to ground.
9, 32DECB, DECAV POS /2 Reference Decoupling Node. Connect a decoupling capacitor from these nodes to ground.
10, 31OFSB, OFSAOutput Offset Correction Loop Compensation. Connect a capacitor from these nodes to ground to enable the correction loop. Tie this pin to ground to disable.
11, 30CCMB, CCMAConnect These Nodes to Ground.
12, 29VCMB,VCMAOutput Common-Mode Setpoint. These pins default toV POS /2 if left open. Drive these pins from a low impedance source to change the output common-mode voltage.
14, 15, 26, 27OPPB, OPMB, OPMA, OPPADifferential Outputs.
16, 17DENB, DENAData Enable. Pull these pins high to address each or both channels for parallel gain programming. These pins are not used in serial mode.
18, 19, 21, 22, 23, 24BIT5, BIT4, BIT3, BIT2/SCLK, BIT1/SDAT, BIT0/CSParallel Data Path (When SENB Is Low).When SENB is high, BIT0 becomes a chip select (CS), BIT1 becomes a serial data input (SDAT), and BIT2 becomes a serial clock (SCLK). BIT3 to BIT5 are not used in serial mode.
25SENBSerial Interface Enable. Pull this pin high for serial gain programming modeandpull this pin low for parallel gain programming mode.
EPADThe exposed pad must be connected to ground.

Variants on the same datasheet

These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.

Part NumberManufacturerPackage
AD8366Analog DevicesLFCSP-32

More datasheets

All Analog Devices datasheets (757)

Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Ask your AI agent about the AD8366ACPZ-R7

Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.

claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp

Then ask: "Can the AD8366ACPZ-R7 run from my 12 V rail? Check it against the datasheet limits."

Create a free account $2 of usage every month, no card needed.