AD8138ARMZ
Differential Amplifier / ADC DriverThe AD8138ARMZ is a differential amplifier / adc driver from Analog Devices. View the full AD8138ARMZ datasheet below including key specifications, absolute maximum ratings.
AD8138ARMZ shares its datasheet with AD8138, whose page lists every part number it covers.
Official AD8138ARMZ datasheet (PDF) — the source this page was extracted from.
AD8138ARMZ Key Specifications
| Parameter | Value |
|---|---|
| Packaging | Tube |
| Standard Pack Qty | 50 |
| -3 dB small-signal bandwidth | 320 MHz typ (VS = ±5 V, VOUT = 0.5 V p-p, CF = 0 pF); 310 MHz typ at VS = 5 V |
| Slew rate | 1150 V/μs (VS = ±5 V, 2 V p-p); 950 V/μs (VS = 5 V) |
| Settling time to 0.01% | 16 ns (2 V p-p, CF = 1 pF) |
| Second harmonic | -94 dBc at 5 MHz, -87 dBc at 20 MHz (VS = ±5 V, 2 V p-p, RL,dm = 800 Ω) |
| Voltage noise (RTI) | 5 nV/√Hz (100 kHz to 40 MHz) |
| Offset voltage | ±1 mV typ, ±2.5 mV max (differential) |
| Quiescent current | 20 mA typ (18 to 23 mA, VS = ±5 V) |
| Output current | 95 mA typ; CMRR -77 dB typ (-70 dB max); PSRR -90 dB typ (-70 dB max) |
AD8138ARMZ Overview
Part: AD8138 — Analog Devices
Type: Differential Amplifier / ADC Driver
Description: Low distortion differential ADC driver with 320 MHz -3 dB bandwidth (G = +1), 1150 V/μs slew rate, and -94 dBc second harmonic at 5 MHz, operating from +3 V to ±5 V supplies.
Operating Conditions:
- Supply voltage: ±1.4 V to ±5.5 V (dual supply); 2.7 V to 11 V (single supply, VS = 5 V specifications)
- Operating temperature: -40 to +85 °C
- Output common-mode voltage set by the VOCM pin (1:1 ratio)
Absolute Maximum Ratings:
- Max supply voltage: ±5.5 V
- VOCM: ±VS
- Internal power dissipation: 550 mW
- Max junction temperature: 150 °C
- Storage temperature: -65 to +150 °C
- Lead temperature (soldering, 10 sec): 300 °C
Key Specs:
- -3 dB small-signal bandwidth: 320 MHz typ (VS = ±5 V, VOUT = 0.5 V p-p, CF = 0 pF); 310 MHz typ at VS = 5 V
- Slew rate: 1150 V/μs (VS = ±5 V, 2 V p-p); 950 V/μs (VS = 5 V)
- Settling time to 0.01%: 16 ns (2 V p-p, CF = 1 pF)
- Second harmonic: -94 dBc at 5 MHz, -87 dBc at 20 MHz (VS = ±5 V, 2 V p-p, RL,dm = 800 Ω)
- Voltage noise (RTI): 5 nV/√Hz (100 kHz to 40 MHz)
- Offset voltage: ±1 mV typ, ±2.5 mV max (differential)
- Quiescent current: 20 mA typ (18 to 23 mA, VS = ±5 V)
- Output current: 95 mA typ; CMRR -77 dB typ (-70 dB max); PSRR -90 dB typ (-70 dB max)
Features:
- Easy-to-use single-ended-to-differential conversion
- Adjustable output common-mode voltage
- Externally adjustable gain
- Low harmonic distortion
- Fast overdrive recovery of 4 ns
- 0.1 dB gain flatness to 30 MHz (VS = ±5 V, 0.5 V p-p, CF = 0 pF)
- Internal feedback for balanced output gain and phase matching
- Available in 8-lead SOIC and MSOP packages
Applications:
- ADC drivers
- Single-ended-to-differential converters
- IF and baseband gain blocks
- Differential buffers
- Line drivers
Package:
- 8-Lead SOIC (θJA 121 °C/W, 4-layer)
- 8-Lead MSOP (θJA 145 °C/W, 4-layer)
AD8138ARMZ Features
Easy to use, single-ended-to-differential conversion Adjustable output common-mode voltage Externally adjustable gain Low harmonic distortion -94 dBc SFDR at 5 MHz -85 dBc SFDR at 20 MHz -3 dB bandwidth of 320 MHz, G = +1 Fast settling to 0.01% of 16 ns Slew rate 1150 V/μs Fast overdrive recovery of 4 ns Low input voltage noise of 5 nV/√Hz 1 mV typical offset voltage Wide supply range +3 V to ±5 V Low power 90 mW on 5 V 0.1 dB gain flatness to 40 MHz Available in 8-Lead SOIC and MSOP packages
AD8138ARMZ Applications
ADC drivers Single-ended-to-differential converters IF and baseband gain blocks Differential buffers
Line drivers
AD8138ARMZ Pin Configuration
01073-004
Figure 4. Pin Configuration
Figure 4. Pin Configuration
Table 7. Pin Function Descriptions
| Pin No. | Mnemonic | Description |
|---|---|---|
| 1 | -IN | Negative Input Summing Node. |
| 2 | V OCM | Voltage applied to this pin sets the common-mode output voltage with a ratio of 1:1. For example, 1V dc onV OCM sets the dc bias level on +OUT and -OUT to 1 V. |
| 3 | V+ | Positive Supply Voltage. |
| 4 | +OUT | Positive Output. Note that the voltage at -D IN is inverted at +OUT (see Figure 42). |
| 5 | -OUT | Negative Output. Note that the voltage at +D IN is inverted at -OUT (see Figure 42). |
| 6 | V- | Negative Supply Voltage. |
| 7 | NC | No Connect. |
| 8 | +IN | Positive Input Summing Node. |
AD8138ARMZ Absolute Maximum Ratings
| Table 5. - Parameter | Ratings |
|---|---|
| Supply Voltage | ±5.5V |
| V OCM | ±V S |
| Internal Power Dissipation | 550mW |
| Operating Temperature Range | -40°C to +85°C |
| Storage Temperature Range | -65°C to +150°C |
| Lead Temperature (Soldering 10 sec) | 300°C |
| Junction Temperature | 150°C |
Stresses at or above those listed under Absolute Maximum Ratings may cause permanent damage to the product. This is a stress rating only; functional operation of the product at these or any other conditions above those indicated in the operational section of this specification is not implied. Operation beyond the maximum operating conditions for extended periods may affect product reliability.
AD8138ARMZ Thermal Information
θJA is specified for the worst-case conditions, that is, θJA is specified for the device soldered in a circuit board in still air.
| Table 6. PackageType | θ JA | Unit |
|---|---|---|
| 8-Lead SOIC/4-Layer | 121 | °C/W |
| 8-Lead MSOP/4-Layer | 145 | °C/W |
AD8138ARMZ Typical Application
The AD8138 eliminates the need for a transformer with high performance ADCs, preserving the low frequency and dc information. The common-mode level of the differential output is OCM pin, easily level-shifting the input signals for driving single-supply ADCs. Fast overload recovery preserves sampling accuracy.
The AD8138 distortion performance makes it an ideal ADC driver for communication systems, with distortion performance good enough to drive state-of-the-art 10-bit to 16-bit converters at high frequencies. The high bandwidth and IP3 of the AD8138 also make it appropriate for use as a gain block in IF and baseband signal chains. The AD8138 offset and dynamic performance makes it well suited for a wide variety of signal processing and data acquisition applications.
The AD8138 is available in both SOIC and MSOP packages for operation over -40°C to +85°C temperatures.
Variants on the same datasheet
These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.
| Part Number | Manufacturer | Package |
|---|---|---|
| AD8138 | Analog Devices | 8-Lead SOIC (R-8) |
| AD8138AR | Analog Devices | 8-Lead SOIC (R-8) |
| AD8138AR-REEL | Analog Devices | 8-Lead SOIC (R-8) |
| AD8138AR-REEL7 | Analog Devices | 8-Lead SOIC (R-8) |
| AD8138ARM | Analog Devices | 8-Lead MSOP (RM-8) |
| AD8138ARM-REEL | Analog Devices | 8-Lead MSOP (RM-8) |
| AD8138ARM-REEL7 | Analog Devices | 8-Lead MSOP (RM-8) |
| AD8138ARMZ-REEL | Analog Devices | 8-Lead MSOP (RM-8) |
| AD8138ARMZ-REEL7 | Analog Devices | 8-Lead MSOP (RM-8) |
| AD8138ARZ | Analog Devices | 8-Lead SOIC (R-8) |
| AD8138ARZ-R7 | Analog Devices | 8-Lead SOIC (R-8) |
| AD8138ARZ-RL | Analog Devices | 8-Lead SOIC (R-8) |
More datasheets
Ask your AI agent about the AD8138ARMZ
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the AD8138ARMZ run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.