Skip to main content

We use cookies to understand how you use our site and improve your experience. See our Privacy Policy.

0805W8F1001T5E

Thick Film Chip Resistor

The 0805W8F1001T5E is a thick film chip resistor from Uniroyal Electronics. View the full 0805W8F1001T5E datasheet below including key specifications, pinout.

0805W8F1001T5E shares its datasheet with 0805W8F4992T5E, whose page lists every part number it covers.

Official 0805W8F1001T5E datasheet (PDF) — the source this page was extracted from.

Manufacturer

Uniroyal Electronics

Category

Chip Resistors

Package

0805

0805W8F1001T5E Key Specifications

ParameterValue
Operating Temperature-55℃~+155℃ °C
Power(Watts)125mW
Resistance1kΩ
Temperature Coefficient±100ppm/℃
Tolerance±1%
TypeThick Film Resistor
Voltage Rating150V

0805W8F1001T5E Overview

Part: Thick Film Chip Resistors 01005/0201/0402/0603/0805/1206/1210/1812/2010/2512 Series — Uniroyal Electronics Global Co., Ltd.

Type: Thick Film Chip Resistor

Description: A series of thick film chip resistors available in various sizes (01005 to 2512) with power ratings from 1/32W to 1W, resistance ranges from 0.01 Ω to 10 MΩ, and tolerances from ±0.5% to ±5%.

Operating Conditions:

  • Operating temperature: -55 to +155 °C
  • Power rating: 1/32W to 1W (at 70 °C)
  • Max working voltage: Up to 200V

Absolute Maximum Ratings:

  • Max overload voltage: Up to 500V
  • Max overload current (for jumper): Up to 10A
  • Max operating temperature: 155 °C

Key Specs:

  • Resistance Range: 0.01 Ω to 10 MΩ (varies by size and tolerance)
  • Tolerance: ±0.5%, ±1%, ±2%, ±5%
  • Power Rating: 1/32W (01005) to 1W (2512) at 70 °C
  • Max Working Voltage: 15V (01005) to 200V (1206-2512)
  • Temperature Coefficient: Ranges from ±100 PPM/°C to ±1500 PPM/°C depending on size and resistance value
  • Solderability: Coverage must be over 95% (Wave solder: 245 °C ±3 °C, 2-3s)
  • Insulation Resistance: ≥ 1,000 MΩ (measured at 100±15V or dielectric withstanding voltage for 1 min)
  • Short-time overload resistance change: ±(1.0%+0.05 Ω) for ±0.5%, ±1% tolerance; ±(2.0%+0.05 Ω) for ±2%, ±5% tolerance (5s at 2.5x RCWV or Max. Overload Voltage)

Features:

  • Small size & light weight
  • Reduction of assembly costs and matching with placement machine
  • Suitable for both wave & re-flow soldering
  • Environmental Protection, Lead Free options

Applications:

  • Navigator (GPS)
  • Mobile Phone
  • Telecom
  • PDA
  • Setbox
  • Meter

Package:

  • 01005 (0.40±0.02 mm L x 0.20±0.02 mm W x 0.13±0.02 mm H)
  • 0201
  • 0402
  • 0603
  • 0805
  • 1206
  • 1210
  • 1812
  • 2010
  • 2512

0805W8F1001T5E Pin Configuration

TDA7313N Pinout

Package: DIP28

PinNameTypeDescription
1CREFPReference capacitor connection
2USIUnselected input (audio input)
3AGNDPAnalog ground
4TREBLE(L)ITreble control input (Left)
5IN(R)IAudio input (Right)
6—PSupply voltage (VCC)
7OUT(R)OAudio output (Right)
8LOUD(R)ILoudness control input (Right)
9R3IRight input selector 1
10R2IRight input selector 2
11R1IRight input selector 3
12LOUD(L)ILoudness control input (Left)
13L3ILeft input selector 3
14L2ILeft input selector 2
15L1ILeft input selector 1
16IN(L)IAudio input (Left)
17OUT(L)OAudio output (Left)
18BOUT(L)OBass/treble output (Left)
19BIN(L)IBass/treble input (Left)
20—PSupply voltage (VCC)
21BIN(R)IBass/treble input (Right)
22RIGHT REARORight rear speaker output
23LEFT REAROLeft rear speaker output
24RIGHT FRONTORight front speaker output
25LEFT FRONTOLeft front speaker output
26DIGGNDPDigital ground
27SDAI/OI²C serial data line
28SCLII²C serial clock line

Notes

  • C17513 could not be located in the provided datasheet. The datasheet covers the TDA7313N in DIP28 and SO28 packages. The pinout above is for the DIP28 variant as shown in the test circuit diagram.
  • Pin 6 and Pin 20 are supply voltage (VCC) connections; exact labeling not explicitly stated in source but inferred from standard IC design and test circuit context.
  • Pins 1–5, 7–19, 21–28 are derived from the test circuit schematic diagram which shows pin numbers and signal names.
  • All audio inputs and outputs are AC-coupled via external capacitors in the test circuit.
  • I²C bus (SDA/SCL) requires external pull-up resistors to VCC per I²C standard.

Variants on the same datasheet

These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.

Part NumberManufacturerPackage
0805W8F1002T5ERoyalohm0805
0805W8F100JT5EUniroyal Electronics0805
0805W8F1200T5EUniroyal Electronics0805
0805W8F1202T5ERoyalohm0805
0805W8F2003T5ERoyalohm0805
0805W8F2201T5EUniroyal Electronics0805
0805W8F2701T5EUniroyal Electronics0805
0805W8F4700T5ERoyalohm—
0805W8F4701T5EUniroyal Electronics0805
0805W8F4992T5EUniroyal Electronics0805
0805W8F499JT5ERoyalohm0805
0805W8F5233T5EUniroyal Electronics0805

Other Chip Resistors

All Chip Resistors datasheetsAll Uniroyal Electronics datasheets (69)

Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Ask your AI agent about the 0805W8F1001T5E

Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.

claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp

Then ask: "Can the 0805W8F1001T5E run from my 12 V rail? Check it against the datasheet limits."

Create a free account $2 of usage every month, no card needed.