ZXCT1008Q.PDF
Features
Manufacturer
Diodes Incorporated
Overview
Part: ZXCT1008 (Diodes Incorporated)
Type: High-Side Current Monitor
Key Specs:
- Sense Voltage: Up to 500 mV
- Supply Range: 2.5 V to 20 V
- Quiescent Current: 4 µA
- Typical Accuracy: 1 %
- Operating Temperature: -40 to +85 °C
- Transconductance: 10,000 µA/V
- Bandwidth: 2 MHz
Features:
- Low Cost, Accurate High-Side Current Sensing
- -40 to +125°C Temperature Range
- Up to 500mV Sense Voltage
- 2.5V to 20V Supply Range
- 4μA Quiescent Current
- 1% Typical Accuracy
- SOT23
- Totally Lead-Free & Fully RoHS Compliant
- Halogen and Antimony Free. "Green" Device
- An Automotive-Compliant Part is Available Under Separate Data Sheet (ZXCT1008Q)
Applications:
- Automotive Current Measurement
- DC Motor and Solenoid Control
- Over Current Monitor
- Power Management
Package:
- SOT23: dimensions not specified
Features
- Low Cost, Accurate High-Side Current Sensing
- -40 to +125°C Temperature Range
- Up to 500mV Sense Voltage
- 2.5V to 20V Supply Range
- 4μA Quiescent Current
- 1% Typical Accuracy
- SOT23
- Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
- Halogen and Antimony Free. "Green" Device (Note 3)
- An Automotive-Compliant Part is Available Under Separate Data Sheet (ZXCT1008Q)
Applications
- Automotive Current Measurement
- DC Motor and Solenoid Control
- Over Current Monitor
- Power Management
Pin Configuration
Application Circuit
- Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
- 2. See http://www.diodes.com/quality/lead\_free.html for more information about Diodes Incorporated's definitions of Halogen- and Antimony-free, "Green" and lead-free.
-
- Halogen- and Antimony-free "Green" products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds.
Pin Descriptions
| Pin Name | Pin Function |
|---|---|
| VSENSE+ | Connection to Supply Voltage |
| VSENSE- | Connection to Load |
| IOUT | Output Current, Proportional to Measured Current |
Electrical Characteristics
| Symbol | Parameter | Conditions | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| VIN | VCC Range | — | 2.5 | — | 20 | V |
| IOUT | Output Current (Note 5) | VSENSE = 0V VSENSE = 10mV VSENSE = 100mV VSENSE = 200mV VSENSE = 500mV | 1 90 0.975 1.95 4.8 | 4 104 1.0 2.0 5.0 | 15 120 1.025 2.05 5.2 | μA μA mA mA mA |
| VSENSE | Sense Voltage (Note 4) | — | 0 | — | 500 | mV |
| ISENSE- | VSENSE - Input Current | — | — | — | 100 | nA |
| ACC | Accuracy | RSENSE = 0.1Ω, VSENSE = 200mV | -2.5 | — | 2.5 | % |
| GM | Transconductance, IOUT/VSENSE | — | | 10,000 | — | μA/V |
| Bandwidth | VSENSE(DC) = 10mV, RF PIN = -40dBm (Note 6) | — | 300 | — | kHz | |
| BW | VSENSE(DC) = 100mV, RF PIN = -20dBm (Note 6) | | 2 | — | MHz |
Notes: 4. VSENSE is defined as the differential voltage between VSENSE+ and VSENSE-
VSENSE = VSENSE+ - VSENSE-
- = VIN VLOAD
- = ILOAD x RSENSE
-
- Includes input offset voltage contribution.
-
- -20dBm=63mVPP into 50Ω.
Absolute Maximum Ratings
| Description | Rating | Unit |
|---|---|---|
| Voltage on Any Pin (relative to IOUT) | -0.6 to 20 | V |
| Continous Output Current, IOUT | 25 | mA |
| Continuous Sense Voltage, VSENSE (Note 4) | -0.5 to 5 | V |
| Operating Temperature, TA | -40 to +85 | °C |
| Storage Temperature | -55 to +125 | °C |
| Package Power Dissipation @ TA = +25°C (Derate to Zero @ +125°C) | 450 | mW |
Operation above the absolute maximum rating may cause device failure. Operation at the absolute maximum ratings for extended periods may reduce device reliability.
Electrical Characteristics (@TA = +25°C, VIN = 5V, ROUT = 100Ω, unless otherwise specified.)
| Symbol | Parameter | Conditions | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| VIN | VCC Range | — | 2.5 | — | 20 | V |
| IOUT | Output Current (Note 5) | VSENSE = 0V VSENSE = 10mV VSENSE = 100mV VSENSE = 200mV VSENSE = 500mV | 1 90 0.975 1.95 4.8 | 4 104 1.0 2.0 5.0 | 15 120 1.025 2.05 5.2 | μA μA mA mA mA |
| VSENSE | Sense Voltage (Note 4) | — | 0 | — | 500 | mV |
| ISENSE- | VSENSE - Input Current | — | — | — | 100 | nA |
| ACC | Accuracy | RSENSE = 0.1Ω, VSENSE = 200mV | -2.5 | — | 2.5 | % |
| GM | Transconductance, IOUT/VSENSE | — | | 10,000 | — | μA/V |
| Bandwidth | VSENSE(DC) = 10mV, RF PIN = -40dBm (Note 6) | — | 300 | — | kHz | |
| BW | VSENSE(DC) = 100mV, RF PIN = -20dBm (Note 6) | | 2 | — | MHz |
Notes: 4. VSENSE is defined as the differential voltage between VSENSE+ and VSENSE-
VSENSE = VSENSE+ - VSENSE-
- = VIN VLOAD
- = ILOAD x RSENSE
-
- Includes input offset voltage contribution.
-
- -20dBm=63mVPP into 50Ω.
Related Variants
The following components are covered by the same datasheet.
| Part Number | Manufacturer | Package |
|---|---|---|
| ZXCT1008 | Diodes Incorporated | — |
| ZXCT1008FTA | Diodes Incorporated | SOT-23 |
| ZXCT1008Q | Diodes Incorporated | — |
Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.
Get structured datasheet data via API
Get started free