XL6009-3A-AUTO-STEP

Auto Step-Up/Step-Down DC-DC Converter

The XL6009-3A-AUTO-STEP is a auto step-up/step-down dc-dc converter from XLSEMI. View the full XL6009-3A-AUTO-STEP datasheet below including key specifications.

XL6009-3A-AUTO-STEP shares its datasheet with XL6009, whose page lists every part number it covers.

Official XL6009-3A-AUTO-STEP datasheet (PDF) — the source this page was extracted from.

Manufacturer

XLSEMI

XL6009-3A-AUTO-STEP Key Specifications

Parameter	Value
Input Voltage	5V~30Vdc
Output Voltage	1.5~35V (continuously adjustable)
Output current	3A Max (heat sink required)
Conversion efficiency	Up to 92%
Switching Frequency	150KHz
Operating temperature	-40 °C to +85 °C
Load regulation	± 0.5%
Voltage regulation	± 0.5%

XL6009-3A-AUTO-STEP Overview

Part: XL6009 Auto Step-Up/Step-Down 3A DC-DC Converter (Module by Handson Technology)

Type: Auto Step-Up/Step-Down (Buck-Boost) DC-DC Converter

Description: A 5–30 V input, 3 A max output current auto step-up/step-down DC-DC converter module with up to 92% peak efficiency and 150 KHz switching frequency.

Operating Conditions:

Supply voltage: 5–30 Vdc
Operating temperature: -40 to +85 °C (output power 10W or less)
Output voltage range: 1.5–35 V
Max output current: 3 A (heat sink required)

Absolute Maximum Ratings:

Max supply voltage: 30 V
Max continuous current: 3 A
Max junction/storage temperature: 85 °C

Key Specs:

Input Voltage: 5V~30Vdc
Output Voltage: 1.5~35V (continuously adjustable)
Output current: 3A Max (heat sink required)
Conversion efficiency: Up to 92%
Switching Frequency: 150KHz
Operating temperature: -40 °C to +85 °C
Load regulation: ± 0.5%
Voltage regulation: ± 0.5%

Features:

Auto step-up/step-down mode (buck-boost converter)
Continuously adjustable output voltage with multi-turn potentiometer
Short circuit protection: current limiting
Non-Synchronous Rectification

Applications:

Package:

Module (48x25x1.5)mm

More datasheets

All XLSEMI datasheets (4)

Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Ask your AI agent about the XL6009-3A-AUTO-STEP

Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.

claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp

Then ask: "Can the XL6009-3A-AUTO-STEP run from my 12 V rail? Check it against the datasheet limits."

Create a free account $2 of usage every month, no card needed.