WS2812B

Part: WS2812B

Type: Intelligent Control LED Integrated Light Source

Description: The WS2812B is an intelligent control LED light source integrating the control circuit and RGB chip in a 5050 package, offering 16.7 million colors with 256 brightness levels per color, a data transfer speed of 800Kbps, and a scan frequency of not less than 400Hz/s.

Operating Conditions:

• Supply voltage: 4.5–5.5 V
• Operating temperature: -20 to +70 °C
• Data transfer speed: 800Kbps
• Scan frequency: Not less than 400Hz/s

Absolute Maximum Ratings:

• Max supply voltage: +5.3 V
• Max junction/storage temperature: +105 °C

Key Specs:

• Input current (I_I): ±1 μA (max, V_I = V_DD/V_SS)
• Input voltage high level (V_IH): 0.7V_DD (min)
• Input voltage low level (V_IL): 0.3V_DD (max)
• Hysteresis voltage (V_H): 0.35 V (typ)
• Transmission delay time (t_PLZ): 300 ns (max, CL=15pF, DIN→DOUT, RL=10KΩ)
• Input capacity (C_I): 15 pF (max)
• Color depth: 256 brightness levels per primary color, 16,777,216 colors
• Data transfer time (TH+TL): 1.25μs ±600ns

Features:

• Intelligent reverse connect protection
• Control circuit and RGB chip integrated in a 5050 package
• Built-in signal reshaping circuit
• Built-in electric reset circuit and power lost reset circuit
• Cascading port transmission signal by single line
• Send data at speeds of 800Kbps

Applications:

• Full-color module, Full color soft lights a lamp strip
• LED decorative lighting
• Indoor/outdoor LED video irregular screen

Package:

• 5050 (4-pin)

• Intelligent reverse connect protection, the power supply reverse connection does not damage the IC.
• The control circuit and the LED share the only power source.
• Control circuit and RGB chip are integrated in a package of 5050 components, form a complete control of pixel point.
• Built-in signal reshaping circuit, after wave reshaping to the next driver, ensure wave-form distortion not accumulate.
• Built-in electric reset circuit and power lost reset circuit.
• Each pixel of the three primary color can achieve 256 brightness display, completed 16777216 color full color display, and scan frequency not less than 400Hz/s.
• Cascading port transmission signal by single line.
• Any two point the distance more than 5m transmission signal without any increase circuit.
• When the refresh rate is 30fps, cascade number are not less than1024 points.
• Send data at speeds of 800Kbps.
• The color of the light were highly consistent, cost-effective..

• Full-color module, Full color soft lights a lamp strip.
• LED decorative lighting, Indoor/outdoor LED video irregular screen.

Electrical Characteristics ( TA=-20 ~ +70 °C , VDD=4.5 ~ 5.5V,VSS=0V,unless otherwise specified )

Intelligent control LED integrated light source

Intelligent control LED integrated light source

Switching characteristics ( TA=-20 ~ +70 °C , VDD=4.5 ~ 5.5V,VSS=0V,unless otherwise specified )