WIZ820IO

Internet Offload Network Module

The WIZ820IO is a internet offload network module from WIZnet. View the full WIZ820IO datasheet below including key specifications.

Official WIZ820IO datasheet (PDF) — the source this page was extracted from.

Manufacturer

WIZnet

WIZ820IO Key Specifications

Parameter	Value
PCB Dimensions	23mm x 25mm
Supply Voltage	3.3V
Ethernet Standard	10/100 Base TX
SPI Clock Frequency	Up to 80 MHz
Supported Protocols	TCP, IPv4, UDP, ICMP, ARP, PPPoE, IGMP, DLC, MAC
I/O Signal Tolerance	5V
Reset Cycle Time (Min)	2 us
Communication Interface	SPI (Mode 0, 3)
Simultaneous Connections	8
NRST Internal PLOCK Time (Max)	150 ms

WIZ820IO Overview

Part: WIZ820io — WIZnet Co., Ltd.

Type: Internet Offload Network Module

Description: Internet offload network module that includes W5200 TCP/IP hardwired chip, integrated PHY, and MAG-JACK, supporting 10/100 Base TX Ethernet and a high-speed SPI interface.

Operating Conditions:

Supply voltage: 3.3V
SPI interface: Mode 0, 3

Key Specs:

SCK Clock Frequency: Max 80 MHz
SCK High Time: Min 6 ns
SCK Low Time: Min 6 ns
nSCS High Time: Min 5 ns
nSCS Hold Time: Min 5 ns
Data In Setup Time: Min 3 ns
Data In Hold Time: Min 3 ns
Output Valid Time: Max 5 ns
Reset Cycle Time: Min 2 us

Features:

Supports 10/100 Base TX
Supports half/full duplex operation
Supports auto-negotiation and auto cross-over detection
IEEE 802.3/802.3u Compliance
Supports high speed SPI Interface (SPI mode 0, 3)
Operates 3.3V with 5V I/O signal tolerance
Supports network status indicator LEDs
Includes Hardware Internet protocols: TCP, IPv4, UDP, ICMP, ARP, PPPoE, IGMP
Includes Hardware Ethernet protocols: DLC, MAC
Supports 8 independent connections simultaneously
Supports Power down mode
Supports Wake On LAN
Supports Socket API for easy application programming

Package:

Module (23mm x 25mm PCB size)
Interfaces with two 2.54mm pitch 1 x 6 header pin

WIZ820IO Pin Configuration

< TOP side view >

< TOP side view >

< Pin assignment >

< Pin assignment >

WIZ820IO Ordering Information

MPN	Package	Temperature Range	Packing
WIZ820io	Module	null	null

More datasheets

All WIZnet datasheets (6)

Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Ask your AI agent about the WIZ820IO

Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.

claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp

Then ask: "Can the WIZ820IO run from my 12 V rail? Check it against the datasheet limits."

Create a free account $2 of usage every month, no card needed.