TPD4E001DPKT
ESD Protection Diode ArrayThe TPD4E001DPKT is a esd protection diode array from Texas Instruments. View the full TPD4E001DPKT datasheet below including key specifications, electrical characteristics, absolute maximum ratings.
TPD4E001DPKT shares its datasheet with TPD4E001, whose page lists every part number it covers.
Official TPD4E001DPKT datasheet (PDF) — the source this page was extracted from.
Manufacturer
Texas InstrumentsCategory
ESD Protection Diode Array
TPD4E001DPKT Key Specifications
| Parameter | Value |
|---|---|
| Applications | Ethernet |
| Breakdown Voltage | 5.5 V |
| Capacitance | 1.5 pF |
| Case/Package | SOT-23 |
| Clamping Voltage | 105.5 V |
| Depth | 1.6 mm |
| Direction | Unidirectional |
| ESD Protection | Yes |
| Height | 0 m |
| Interface | Ethernet, LVDS |
| Lead Free | Lead Free |
| Leakage Current | 1 nA |
| Length | 2.9 mm |
| Lifecycle Status | Production (Last Updated: 1 day ago) |
| Manufacturer Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Max Operating Temperature | 85 °C |
| Max Power Dissipation | 100 W |
| Max Reverse Leakage Current | 1 nA |
| Min Breakdown Voltage | 11 V |
| Min Operating Temperature | -40 °C |
| Mounting Type | Surface Mount |
| Number of Bidirectional Channels | 4 |
| Number of Channels | 4 |
| Number of Pins | 6 |
| Operating Supply Voltage | 5.5 V |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Package / Case | SOT-23-6 |
| Packaging | MouseReel |
| Peak Pulse Current | 5.5 A |
| Peak Pulse Power | 100 W |
| Power - Peak Pulse | 100W |
| Power Line Protection | Yes |
| Power Line Protection | Yes |
| Radiation Hardening | No |
| REACH SVHC | Unaffected |
| Reverse Standoff Voltage | 5.5 V |
| RoHS | Compliant |
| Schedule B | 8541100080, 8541100080|8541100080|8541100080|8541100080|8541100080 |
| Standard Pack Qty | 3000 |
| Supplier Device Package | SOT-23-6 |
| Termination | SMD/SMT |
| Test Current | 10 mA |
| Thickness | 1.2 mm |
| Type | Steering (Rail to Rail) |
| Unidirectional Channels | 4 |
| Voltage - Breakdown (Min) | 11V |
| Voltage - Reverse Standoff (Typ) | 5.5V (Max) |
| Width | 1.6 mm |
| Working Voltage | 5.5 V |
TPD4E001DPKT Overview
Part: TPD4E001DBVR — Texas Instruments
Type: 4-Channel ESD Protection Diode Array (TVS)
Description: 4-channel low-capacitance ESD protection array with 1.5 pF typical IO capacitance, ±8 kV contact / ±15 kV air-gap IEC 61000-4-2 (Level 4) protection, and 0.9–5.5 V supply range.
Operating Conditions:
- Supply voltage (VCC pin): 0.9–5.5 V
- Operating temperature: -40 to 85 °C
- IO1, IO2 pin operating voltage: 0 V to VCC
Absolute Maximum Ratings:
- Max supply voltage (VCC): 7 V
- IO voltage: -0.3 V to VCC + 0.3 V
- IEC 61000-4-5 peak pulse current (8/20 μs, IOx pins): 5.5 A
- Max junction temperature: 150 °C
- Storage temperature: -65 to 150 °C
Key Specs:
- Supply current (ICC): 1 nA typ, 100 nA max
- Channel leakage current: ±1 nA max (Vi/o = GND to VCC)
- Channel input capacitance: 1.5 pF typ (VCC = 5 V, bias VCC/2, f = 10 MHz)
- Breakdown voltage: 11 V min (IBR = 10 mA)
- Diode forward voltage: 0.65–0.95 V (IF = 10 mA)
- Reverse stand-off voltage: 5.5 V max
- Clamp voltage (IEC 61000-4-2, ±8 kV contact, IF = 24 A, TA = 25 °C): VCC + 60 V max positive, -60 V max negative
- Clamp voltage (surge, IPP = 5 A, 8/20 μs): 17 V typ positive
- Thermal resistance RθJA (DBV, SOT, 6-pin): 259.7 °C/W
Features:
- IEC 61000-4-2 ESD protection (Level 4): ±8 kV contact, ±15 kV air-gap
- 5.5 A peak pulse current (8/20 μs)
- HBM ESD: ±15 kV on IO pins (DBV package pins 1, 3, 4, 6); CDM ±1 kV
- Low IO capacitance, low leakage current
- Uni-directional protection; VCC line also protected
- Alternate 2-, 3-, 6-channel options: TPD2E001, TPD3E001, TPD6E001
Applications:
- USB 2.0
- Ethernet
- FireWire serial bus
- LVDS
- SVGA video connections
- Glucose meters
Package:
- DBV: SOT-23, 6-pin (2.90 mm × 1.60 mm)
- Other family packages: DRL (SOT), DCK (SC70), DRS (SON), DPK (USON)
TPD4E001DPKT Features
- IEC 61000-4-2 ESD Protection (Level 4)
- -±8kV Contact Discharge
- -±15kV Air-Gap Discharge
- 5.5A Peak Pulse Current (8/20μs Pulse)
- IO Capacitance: 1.5pF (Typical)
- Low Leakage Current: 1nA (Maximum)
- Low Supply Current: 1nA
- 0.9V to 5.5V Supply-Voltage Range
- Space-Saving DRL, DBV, DCK, DPK, and DRS Package Options
- Alternate 2, 3, 6-Channel options Available: TPD2E001, TPD3E001, TPD6E001
TPD4E001DPKT Applications
- USB 2.0
- Ethernet
- FireWire ™ Serial Bus
- LVDS
- SVGA Video Connections
- Glucose Meters
TPD4E001DPKT Pin Configuration
$$IO3 V CC IO4 1 2 6 3 5 4 IO2 IO1$$
GND
Figure 4-1. DRL Package 6-Pin SOT Top View
IO3
GND
V CC
IO4
1
2
6
3
5
4
IO1
IO2
Figure 4-2. DBV or DCK Package 6-Pin SOT or SC70 Top View
IO1
IO2
GND
V CC
IO4
IO3
GND
1
2
3
4
5
6
Figure 4-3. DRS Package 6-Pin SON Top View
- IO1 1
IO2
GND
V CC
IO4
IO3
2
3
4
5
6
Figure 4-4. DPK Package 6-Pin USON Top View
1
2
3
6
5
4
IO1
VCC
IO2
IO3
GND
IO4
Figure 4-5. TPD4E001R DBV Package 6-Pin SOT Top View
TPD4E001DPKT Electrical Characteristics
over operating free-air temperature range (unless otherwise noted), V CC = 5 V ± 10%
| PARAMETER | PARAMETER | TEST CONDITIONS | TEST CONDITIONS | MIN | TYP (1) | MAX | UNIT |
|---|---|---|---|---|---|---|---|
| V CC | Supply voltage | 0.9 | 5.5 | V | |||
| I CC | Supply current | 1 | 100 | nA | |||
| V F | Diode forward voltage | I F = 10mA | I F = 10mA | 0.65 | 0.95 | V | |
| V BR | Breakdown Voltage | I BR = 10mA | I BR = 10mA | 11 | V | ||
| V C | Channel clamp voltage | T A = 25°C, ±15kV HBM, I F = 10A | Positive transients | V CC + 25 | V | ||
| V C | Channel clamp voltage | T A = 25°C, ±15kV HBM, I F = 10A | Negative transients | -25 | V | ||
| V C | Channel clamp voltage | T A = 25°C, ±8kV contact discharge (IEC 61000-4-2), I F = 24A | Positive transients | V CC + 60 | V | ||
| V C | Channel clamp voltage | T A = 25°C, ±8kV contact discharge (IEC 61000-4-2), I F = 24A | Negative transients | -60 | V | ||
| V C | Channel clamp voltage | T A = 25°C, ±15kV air-gap discharge (IEC 61000-4-2), I F = 45A | Positive transients | V CC + 100 | |||
| V C | Channel clamp voltage | T A = 25°C, ±15kV air-gap discharge (IEC 61000-4-2), I F = 45A | Negative transients | -100 | |||
| V C | Channel clamp voltage | Surge strike on IO pin, GND pin grounded, I PP = 5A, 8/20μs (2) | Positive transients | 17 | |||
| V RWM | Reverse stand-off voltage | IO pin to GND pin | IO pin to GND pin | 5.5 | V | ||
| I I/O | Channel leakage current | V i/o = GND to V CC | V i/o = GND to V CC | ±1 | nA | ||
| C I/O | Channel input capacitance | V CC = 5V, bias of V CC /2; ƒ = 10MHz | V CC = 5V, bias of V CC /2; ƒ = 10MHz | 1.5 | pF |
TPD4E001DPKT Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted) (1)
| MIN | MAX | UNIT | |||
|---|---|---|---|---|---|
| V CC | -0.3 | 7 | V | ||
| V I/O | IO voltage tolerance | -0.3 | V CC + 0.3 | V | |
| I (Surge) | IEC 61000-4-5 peak pulse current (T P = 8/20μs), IOx | pins | 5.5 | A | |
| P (Surge) | IEC 61000-4-5 peak pulse power (T P = 8/20μs), IOx | pins | 100 | W | |
| T J | Junction temperature | 150 | °C | ||
| Bump temperature (soldering) | Infrared (15s) | 220 | °C | ||
| Vapor phase (60s) | 215 | °C | |||
| Lead temperature (soldering, 10s) | Lead temperature (soldering, 10s) | 300 | °C | ||
| T stg | Storage temperature | Storage temperature | -65 | 150 | °C |
TPD4E001DPKT Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted)
| MIN | MAX | UNIT | |||
|---|---|---|---|---|---|
| T A | Operating free-air temperature | -40 | 85 | °C | |
| Operating voltage | V CC pin | 0.9 | 5.5 | V | |
| Operating voltage | IO1, IO2 pins | 0 | V CC | V |
TPD4E001DPKT Thermal Information
| THERMAL METRIC (1) | THERMAL METRIC (1) | TPD4E001 - DRL (SOT) - 6 PINS | TPD4E001 - DBV (SOT) - 6 PINS | TPD4E001 - DCK (SC70) - 6 PINS | TPD4E001 - DPK (USON) - 6 PINS | TPD4E001 - DRS (SON) - 6 PINS | UNIT |
|---|---|---|---|---|---|---|---|
| R θJA | Junction-to-ambient thermal resistance | 226.4 | 259.7 | 251.1 | 247.6 | 91.9 | °C/W |
| R θJC(top) | Junction-to-case (top) thermal resistance | 90.3 | 186.5 | 88.1 | 124.8 | 106.9 | °C/W |
| R θJB | Junction-to-board thermal resistance | 61.2 | 107.6 | 54.8 | 204.2 | 64.8 | °C/W |
| ψ JT | Junction-to-top characterization parameter | 6.7 | 71.4 | 1.7 | 19.2 | 10.2 | °C/W |
| ψ JB | Junction-to-board characterization parameter | 61 | 107.1 | 54.1 | 209.3 | 64.9 | °C/W |
| R θJC(bot) | Junction-to-case (bottom) thermal resistance | N/A | N/A | N/A | N/A | 29.9 | °C/W |
TPD4E001DPKT Typical Application
The TPD4E001 is a diode array type Transient Voltage Suppressor (TVS) which is typically used to provide a path to ground for dissipating ESD events on hi-speed signal lines between a human interface connector and a system. As the current from ESD passes through the TVS, only a small voltage drop is present across the diode. This is the voltage presented to the protected IC. The low R DYN of the triggered TVS holds this voltage, V CLAMP , to a tolerable level to the protected IC.
TPD4E001DPKT Package Information
| PART NUMBER | PACKAGE (1) | BODY SIZE (NOM) |
|---|---|---|
| TPD4E001 | SOT (6) | 1.60mm × 1.20mm 2.90mm × 1.60mm |
| TPD4E001 | SC70 (6) | 2.00mm × 1.25mm |
| TPD4E001 | USON (6) | 1.60mm × 1.60mm |
| TPD4E001 | SON (6) | 3.00mm × 3.00mm |
- (1) For all available packages, see the orderable addendum at the end of the data sheet.
Application Schematic
Variants on the same datasheet
These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.
| Part Number | Manufacturer | Package |
|---|---|---|
| TPD4E001 | Texas Instruments | — |
| TPD4E001-Q1 | Texas Instruments | — |
| TPD4E001DBVR | Texas Instruments | SOT-23-6 |
| TPD4E001DBVR.B | Texas Instruments | — |
| TPD4E001DCKR | Texas Instruments | 6-TSSOP, SC-88, SOT-363 |
| TPD4E001DCKR.B | Texas Instruments | — |
| TPD4E001DPKR | Texas Instruments | — |
| TPD4E001DPKR.B | Texas Instruments | — |
| TPD4E001DPKT.B | Texas Instruments | — |
| TPD4E001DRL | Texas Instruments | — |
| TPD4E001DRLR | Texas Instruments | — |
| TPD4E001DRLR.B | Texas Instruments | — |
| TPD4E001DRSR | Texas Instruments | — |
| TPD4E001DRSR.B | Texas Instruments | — |
| TPD4E001R | Texas Instruments | — |
| TPD4E001RDBVR | Texas Instruments | — |
| TPD4E001RDBVR.B | Texas Instruments | — |
More datasheets
Ask your AI agent about the TPD4E001DPKT
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the TPD4E001DPKT run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.