TLV9062IDSGT
The TLV9062IDSGT is an electronic component from Texas Instruments. View the full TLV9062IDSGT datasheet below including electrical characteristics, absolute maximum ratings.
Manufacturer
Texas Instruments
Overview
Part: TLV906xS, TLV906x from Texas Instruments
Type: CMOS Operational Amplifiers
Description: The TLV906x and TLV906xS are 1.8–5.5V, 10MHz unity-gain stable CMOS operational amplifiers with rail-to-rail input and output, featuring low input offset voltage of ±0.3mV and low quiescent current of 538μA.
Operating Conditions:
- Supply voltage: 1.8–5.5 V
- Operating temperature: -40 to 125 °C
- Input voltage range: (V-) - 0.1 to (V+) + 0.1 V
- Output voltage range: V- to V+
Absolute Maximum Ratings:
- Max supply voltage: 6 V
- Max continuous input current: ±10 mA
- Max junction temperature: 150 °C
- Max storage temperature: 150 °C
Key Specs:
- Input offset voltage: ±0.3mV
- Unity-gain bandwidth: 10MHz
- Broadband noise: 10nV/√ Hz
- Input bias current: 0.5pA
- Quiescent current: 538μA
- Capacitive load drive: 100pF
- Unity-gain stable
- Rail-to-rail input and output
Features:
- Rail-to-rail input and output
- Low input offset voltage: ±0.3mV
- Unity-gain bandwidth: 10MHz
- Low broadband noise: 10nV/√ Hz
- Low input bias current: 0.5pA
- Low quiescent current: 538μA
- Unity-gain stable
- Internal RFI and EMI filter
- Operational at supply voltages as low as 1.8V
- Easier to stabilize with higher capacitive load due to resistive open-loop output impedance
- Shutdown version: TLV906xS
- Extended temperature range: -40°C to 125°C
Applications:
- E-bikes
- Smoke detectors
- HVAC: heating, ventilating, and air conditioning
- Motor control: AC induction
- Refrigerators
- Wearable devices
- Laptop computers
- Washing machines
- Sensor signal conditioning
- Power modules
- Barcode scanners
- Active Filters
- Low-side current sensing
Package:
- SOT-23 (5-pin, 6-pin, 8-pin)
- SC70 (5-pin)
- SOT-553 (5-pin)
- X2SON (5-pin)
- USON (6-pin)
- SOIC (8-pin, 14-pin)
- TSSOP (8-pin, 14-pin)
- VSSOP (8-pin, 10-pin)
- WSON (8-pin)
- X2QFN (10-pin, 14-pin)
- DSBGA (9-pin)
- WQFN (16-pin)
Features
-
Rail-to-rail input and output
-
Low input offset voltage: ±0.3mV
-
Unity-gain bandwidth: 10MHz
-
Low broadband noise: 10nV/√ Hz
-
•
-
Low input bias current: 0.5pA
-
Low quiescent current: 538μA
-
Unity-gain stable
-
Internal RFI and EMI filter
-
Operational at supply voltages as low as 1.8V
-
Easier to stabilize with higher capacitive load due to resistive open-loop output impedance
-
Shutdown version: TLV906xS
-
Extended temperature range: -40°C to 125°C
Applications
-
Smoke detectors
-
HVAC: heating, ventilating, and air conditioning
-
Motor control: AC induction
-
Refrigerators
-
Wearable devices
-
Laptop computers
-
Washing machines
-
Sensor signal conditioning
-
Power modules
-
Barcode scanners
-
Active Filters
-
Low-side current sensing
Pin Configuration
Figure 4-1. TLV9061 DBV or DRL Package, 5-Pin SOT-23 or SOT-553 (Top View)
Figure 4-2. TLV9061 DCK Package, 5-Pin SC70 (Top View)
Figure 4-3. TLV9061 DPW Package, 5-Pin X2SON (Top View)
Table 4-1. Pin Functions: TLV9061
| PIN | PIN | PIN | PIN |
|---|---|---|---|
| NAME | SOT-23, SOT-553 | SC70 | X2SON |
| IN- | 4 | 3 | 2 |
| IN+ | 3 | 1 | 4 |
| OUT | 1 | 4 | 1 |
| V- | 2 | 2 | 3 |
| V+ | 5 | 5 | 5 |
(1) I = input, O = output
Table 4-1. Pin Functions: TLV9061
Figure 4-4. TLV9061S DBV Package, 6-Pin SOT-23 (Top View)
Figure 4-5. TLV9061S DRY Package, 6-Pin USON (Top View)
Table 4-2. Pin Functions: TLV9061S
| PIN | PIN | PIN | TYPE (1) | DESCRIPTION |
|---|---|---|---|---|
| NAME | SOT-23 | USON | TYPE (1) | DESCRIPTION |
| IN- | 4 | 3 | I | Inverting input |
| IN+ | 3 | 1 | I | Noninverting input |
| OUT | 1 | 4 | O | Output |
| SHDN | 5 | 5 | I | Shutdown: low = amp disabled, high = amp enabled. See Shutdown Function section for more information. |
| V- | 2 | 2 | I or- | Negative (low) supply or ground (for single-supply operation) |
| V+ | 6 | 6 | I | Positive (high) supply |
Electrical Characteristics
For VS (Total Supply Voltage) = (V+) - (V-) = 1.8V to 5.5V at T A = 25°C, R L = 10 kΩ connected to VS / 2, VCM = VS / 2, and VOUT = VS / 2 (unless otherwise noted)
| PARAMETER | TEST CONDITIONS | MIN | TYP | MAX | UNIT | |
|---|---|---|---|---|---|---|
| OFFSET VOLTAGE | OFFSET VOLTAGE | OFFSET VOLTAGE | OFFSET VOLTAGE | OFFSET VOLTAGE | OFFSET VOLTAGE | OFFSET VOLTAGE |
| V | Input offset voltage | V S = 5V | ±0.3 | ±1.6 | mV | |
| OS | V S = 5V, T A = -40°C to 125°C | ±2 | ||||
| dV OS /dT | Drift | V S = 5V, T A = -40°C to 125°C | ±0.53 | μV/°C | ||
| PSRR | Power-supply rejection ratio | V S = 1.8V - 5.5V, V CM = (V-) | ±7 | ±80 | μV/V | |
| Channel separation, DC | At DC | 100 | dB | |||
| INPUT VOLTAGE RANGE | INPUT VOLTAGE RANGE | INPUT VOLTAGE RANGE | INPUT VOLTAGE RANGE | INPUT VOLTAGE RANGE | INPUT VOLTAGE RANGE | INPUT VOLTAGE RANGE |
| V CM | Common-mode voltage range | V S = 1.8V to 5.5V | (V-) - 0.1 | (V+) + 0.1 | V | |
| CMRR | Common-mode rejection ratio | V S = 5.5V, (V-) - 0.1V < V CM < (V+) - 1.4V, T A = -40°C to 125°C V S = 5.5V, V CM = -0.1V to 5.6V, T A = -40°C to 125°C V S = 1.8V, (V-) - 0.1V < V CM < (V+) - 1.4V, | 80 57 | 103 87 | dB | |
| INPUT BIAS CURRENT | INPUT BIAS CURRENT | INPUT BIAS CURRENT | ||||
| I B | Input bias current | ±0.5 | pA | |||
| I OS | Input offset current | ±0.05 | pA | |||
| E n Input peak) e n Input | voltage noise (peak-to- voltage noise density density | V S = 5V, f = 10kHz V S = 5V, f = V S = 5V, f = 0.1Hz to 10Hz | 10 16 4.77 | nV/√ Hz μV PP | ||
| i n | Input current noise | 1kHz f = 1kHz | 23 | fA/√ Hz | ||
| INPUT CAPACITANCE | INPUT CAPACITANCE | INPUT CAPACITANCE | INPUT CAPACITANCE | INPUT CAPACITANCE | INPUT CAPACITANCE | INPUT CAPACITANCE |
| C ID | Differential | 2 | pF | |||
| C IC | Common-mode | 4 | pF | |||
| OPEN-LOOP GAIN | OPEN-LOOP GAIN | OPEN-LOOP GAIN | OPEN-LOOP GAIN | OPEN-LOOP GAIN | OPEN-LOOP GAIN | OPEN-LOOP GAIN |
| A OL | Open-loop voltage gain | V S = 1.8V, (V-) + 0.04V < V O < (V+) - 0.04V, R L = 10kΩ V S = 5.5V, (V-) + 0.05V < V O < (V+) - 0.05V, | 100 | dB | ||
| R L = 10kΩ V S = 1.8V, (V-) + 0.06V < V O < (V+) - 0.06V, | 104 | 130 | dB | |||
| GBP Gain φ | bandwidth product Phase margin | V S = 5V, G = +1 V S = 5V, G = +1 | 10 55 | MHz | ||
| m SR | Slew rate | V = 5V, G = +1 S | 6.5 | ° V/μs | ||
| t S | Settling time | To 0.1%, V S = 5V, 2V step , G = +1, C L = 100pF To 0.01%, V S = 5V, 2V step, G = +1, C L = 100pF | 0.5 1 | μs | ||
| t OR | Overload recovery time | V S = 5V, V IN × gain > V S | 0.2 | μs | ||
| THD + N | Total harmonic distortion + | V S = 5.5V, V CM = 2.5V, V O = 1V RMS , G = +1, | 0.0008% | |||
| OUTPUT | noise (1) | f = 1kHz | ||||
| V O | Voltage output swing from supply rails | V S = 5.5V, R L = 10kΩ | 20 | mV | ||
| I SC | Short-circuit current | V S = 5.5V, R L = 2kΩ V S = 5V | ±50 | 60 | mA |
For VS (Total Supply Voltage) = (V+) - (V-) = 1.8V to 5.5V at T A = 25°C, R L = 10 kΩ connected to VS / 2, VCM = VS / 2, and VOUT = VS / 2 (unless otherwise noted)
Absolute Maximum Ratings
over operating ambient temperature (unless otherwise noted) (1)
| MIN | MAX | UNIT | |||
|---|---|---|---|---|---|
| Supply voltage [(V+) - (V-)] | Supply voltage [(V+) - (V-)] | Supply voltage [(V+) - (V-)] | 0 | 6 | V |
| Signal input pins | Common-mode | (V-) - 0.5 | (V+) + 0.5 | V | |
| Signal input pins | Differential | (V+) - (V-) + 0.2 | V | ||
| Signal input pins | Current (2) | Current (2) | -10 | 10 | mA |
| Output short-circuit (3) | Output short-circuit (3) | Output short-circuit (3) | Continuous | mA | |
| Specified, T A | Specified, T A | -40 | 125 | °C | |
| Junction, T J | Junction, T J | 150 | °C | ||
| Storage, T stg | Storage, T stg | -65 | 150 | °C |
Recommended Operating Conditions
over operating ambient temperature range (unless otherwise noted)
| MIN | MAX | UNIT | ||
|---|---|---|---|---|
| V S | Supply voltage (V S = [V+] - [V-]) | 1.8 | 5.5 | V |
| V I | Input voltage range | (V-) - 0.1 | (V+) + 0.1 | V |
| V O | Output voltage range | V- | V+ | V |
| V SHDN_IH | High level input voltage at shutdown pin (amplifier enabled) | 1.1 | V+ | V |
| V SHDN_IL | Low level input voltage at shutdown pin (amplifier disabled) | V- | 0.2 | V |
| T A | Specified temperature | -40 | 125 | °C |
Thermal Information
Figure 4-14. TLV9064S RTE Package, 16-Pin WQFN With Exposed Thermal Pad (Top View)
Table 4-6. Pin Functions: TLV9064S
| PIN | PIN | TYPE (1) | DESCRIPTION |
|---|---|---|---|
| NAME | NO. | TYPE (1) | DESCRIPTION |
| IN1- | 16 | I | Inverting input, channel 1 |
| IN1+ | 1 | I | Noninverting input, channel 1 |
| IN2- | 4 | I | Inverting input, channel 2 |
| IN2+ | 3 | I | Noninverting input, channel 2 |
| IN3- | 9 | I | Inverting input, channel 3 |
| IN3+ | 10 | I | Noninverting input, channel 3 |
| IN4- | 13 | I | Inverting input, channel 4 |
| IN4+ | 12 | I | Noninverting input, channel 4 |
| OUT1 | 15 | O | Output, channel 1 |
| OUT2 | 5 | O | Output, channel 2 |
| OUT3 | 8 | O | Output, channel 3 |
| OUT4 | 14 | O | Output, channel 4 |
| SHDN12 | 6 | I | Shutdown: low = amp disabled, high = amp enabled. Channel 1. See Shutdown Function section for more information. |
| SHDN34 | 7 | I | Shutdown: low = amp disabled, high = amp enabled. Channel 1. See Shutdown Function section for more information. |
| V- | 11 | I or- | Negative (low) supply or ground (for single-supply operation) |
| V+ | 2 | I | Positive (high) supply |
(1) I = input, O = output
Table 4-6. Pin Functions: TLV9064S
Typical Application
The TLV906x family features 10MHz bandwidth and 6.5V/μs slew rate with only 538μA of supply current per channel, providing good AC-performance at very low power consumption. DC applications are well served with a very low input noise voltage of 10nV/√ Hz at 10kHz, low input bias current, and a typical input offset voltage of 0.3mV.
Related Variants
The following components are covered by the same datasheet.
| Part Number | Manufacturer | Package |
|---|---|---|
| TLV9061IDBVR | Texas Instruments | SOT-23-5 |
| TLV9062 | Texas Instruments | — |
| TLV9062-Q1 | Texas Instruments | — |
| TLV9062IDDFR | Texas Instruments | TSOT-23-8 |
| TLV9062IDDFR.A | Texas Instruments | — |
| TLV9062IDGKR | Texas Instruments | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) |
| TLV9062IDGKR.A | Texas Instruments | — |
| TLV9062IDGKRG4 | Texas Instruments | — |
| TLV9062IDGKT | Texas Instruments | — |
| TLV9062IDGKT.A | Texas Instruments | — |
| TLV9062IDR | Texas Instruments | 8-SOIC (0.154", 3.90mm Width) |
| TLV9062IDR.A | Texas Instruments | — |
| TLV9062IDRG4 | Texas Instruments | — |
| TLV9062IDRG4.A | Texas Instruments | — |
| TLV9062IDSGR | Texas Instruments | — |
| TLV9062IDSGR.A | Texas Instruments | — |
| TLV9062IDSGRG4 | Texas Instruments | — |
| TLV9062IDSGT.A | Texas Instruments | — |
| TLV9062IPWR | Texas Instruments | 8-TSSOP (0.173", 4.40mm Width) |
| TLV9062IPWR.A | Texas Instruments | — |
| TLV9062S | Texas Instruments | — |
| TLV9062SIDGSR | Texas Instruments | — |
| TLV9062SIRUGR | Texas Instruments | — |
| TLV9062SIYCKR | Texas Instruments | 9-XFBGA, DSBGA |
Get structured datasheet data via API
Get started free