TLV62585RWTT
The TLV62585RWTT is an electronic component from Texas Instruments. View the full TLV62585RWTT datasheet below including electrical characteristics, absolute maximum ratings.
Manufacturer
Texas Instruments
Overview
Part: TLV62585 — Texas Instruments
Type: Synchronous Buck Converter
Description: The TLV62585 is a high-frequency synchronous step-down converter optimized for compact solution size and high efficiency, integrating switches capable of delivering an output current up to 3 A from a 2.5-V to 5.5-V input.
Operating Conditions:
- Supply voltage: 2.5–5.5 V
- Operating temperature: -40 to 125 °C
- Output voltage range: 0.6 V to VIN
- Output current: 0 to 3 A
Absolute Maximum Ratings:
- Max supply voltage: 6 V
- Max junction/storage temperature: 150 °C
Key Specs:
- Quiescent current (no load, not switching): 35 μA (typ)
- Shutdown current: 0.7 μA (typ), 2 μA (max)
- Feedback regulation voltage (PWM mode, 0°C to 85°C): 594 mV (min), 600 mV (typ), 606 mV (max)
- High-side FET on-resistance: 56 mΩ (typ)
- Low-side FET on-resistance: 32 mΩ (typ)
- High-side FET switch current limit: 4 A (min), 4.6 A (typ)
- PWM switching frequency (VOUT = 1.8V, IOUT = 1 A): 1.5 MHz (typ)
- Soft start time: 900 μs (typ)
Features:
- Up to 95% efficiency
- Low RDS(ON) power switches
- Adjustable output voltage from 0.6-V to VIN
- Power save mode for light load efficiency
- 100% duty cycle for lowest dropout
- Short circuit protection (HICCUP)
- Output discharge
- Power good output
- Thermal shutdown protection
Applications:
- General purpose point-of-load supply
- Battery-powered application
- Wireless router, solid state drive
- Set-top box, multi functional printer
- Motor control
Package:
- QFN (12) 2.00 mm × 2.00 mm
- SOT563 (6) 1.60 mm x 1.60 mm
Features
- 1 · Up to 95% efficiency
- Low RDS(ON) power switches 56 m Ω / 32 m Ω
- 2.5-V to 5.5-V input voltage range
- Adjustable output voltage from 0.6-V to VIN
- Power save mode for light load efficiency
- 100% duty cycle for lowest dropout
- 35μ A operating quiescent current
- 1.5-MHz typical switching frequency
- Short circuit protection (HICCUP)
- Output discharge
- Power good output
- Thermal shutdown protection
- Available in 2-mm × 2-mm QFN or 1.6-mm x 1.6mm SOT563 package
- Create a custom design using the TLV62585 with the WEBENCH ® Power Designer
Applications
- General purpose point-of-load supply
- Battery-powered application
- Wireless router, solid state drive
- Set-top box, multi functional printer
- Motor control
Spacer
Spacer
Spacer
Pin Configuration
Electrical Characteristics
TJ = 25 °C, and VIN = 5 V, unless otherwise noted.
| PARAMETER | PARAMETER | TEST CONDITIONS | MIN | TYP | MAX | UNIT |
|---|---|---|---|---|---|---|
| SUPPLY | SUPPLY | SUPPLY | SUPPLY | SUPPLY | SUPPLY | SUPPLY |
| I Q | Quiescent current into VIN | No load, device not switching | 35 | μA | ||
| I SD | Shutdown current into VIN | EN = Low | 0.7 | 2 | μA | |
| Under voltage lock out threshold | V IN falling | 2.3 | 2.45 | V | ||
| V UVLO | Under voltage lock out hysteresis | 150 | mV | |||
| T JSD | Thermal shutdown threshold Thermal shutdown hysteresis | T J rising | 150 20 | °C °C | ||
| LOGIC INTERFACE EN | LOGIC INTERFACE EN | LOGIC INTERFACE EN | LOGIC INTERFACE EN | LOGIC INTERFACE EN | LOGIC INTERFACE EN | LOGIC INTERFACE EN |
| V IH | High-level input voltage | V IN = 2.5 V to 5.5 V | 1.2 | V | ||
| V IL | Low-level input voltage | V IN = 2.5 V to 5.5 V | 0.4 | V | ||
| SOFT START, POWER GOOD | SOFT START, POWER GOOD | SOFT START, POWER GOOD | SOFT START, POWER GOOD | SOFT START, POWER GOOD | SOFT START, POWER GOOD | SOFT START, POWER GOOD |
| t SS | Soft start time | Time from EN high to 95% of V OUT nominal | 900 | μs | ||
| V | Power good threshold | V OUT rising, referenced to V OUT nominal | 95% | |||
| PG | V OUT falling, referenced to V OUT nominal | 90% | ||||
| V PG,OL | Low-level output voltage | I sink = 1 mA | 0.4 | V | ||
| I PG,LKG | Input leakage current into PG pin | V PG = 5.0 V | 0.01 | μA | ||
| t PG,DLY | Power good delay | V FB falling | 40 | μs | ||
| OUTPUT | OUTPUT | OUTPUT | OUTPUT | OUTPUT | OUTPUT | OUTPUT |
| V FB | Feedback regulation voltage | PWM mode, 2.5 V ≤ VIN ≤ 5.5 V, 0°C to 85°C | 594 | 600 | 606 | mV |
| PWM mode, 2.5 V ≤ VIN ≤ 5.5 V, -40°C to 125°C | 588 | 600 | 612 | mV | ||
| I FB,LKG | Feedback input leakage current | V FB = 0.6 V | 0.01 | μA | ||
| R DIS | Output discharge FET on-resistance | EN = Low, V OUT = 1.8 V | 10 | Ω | ||
| POWER SWITCH | POWER SWITCH | POWER SWITCH | POWER SWITCH | POWER SWITCH | POWER SWITCH | POWER SWITCH |
| R DS(on) | High-side FET on-resistance Low-side FET on-resistance | 56 32 | m Ω m Ω | |||
| I LIM | High-side FET switch current limit | 4 | 4.6 | A | ||
| f SW | PWM switching frequency | V OUT = 1.8V, I OUT = 1 A | 1.5 | MHz |
Absolute Maximum Ratings
| MIN | MAX | UNIT | ||
|---|---|---|---|---|
| Voltage at Pins (1) | VIN, EN, PG | -0.3 | 6 | V |
| Voltage at Pins (1) | FB | -0.3 | 3 | V |
| Voltage at Pins (1) | SW (DC) | -0.3 | V IN + 0.3 | V |
| Voltage at Pins (1) | SW (AC, less than 10ns) (2) | -3 | 9 | V |
| Operating Junction, T J | -40 | 150 | °C | |
| Storage, T stg | -65 | 150 | °C |
Recommended Operating Conditions
| MIN | NOM | MAX | UNIT | ||
|---|---|---|---|---|---|
| V IN | Input voltage range | 2.5 | 5.5 | V | |
| V OUT | Output voltage range | 0.6 | V IN | V | |
| I SINK_PG | Sink current at PG pin | 1 | mA | ||
| I OUT | Output current | 0 | 3 | A | |
| T J | Operating junction temperature | -40 | 125 | °C |
Thermal Information
| (1) | TLV62585 | TLV62585 | UNIT | |
|---|---|---|---|---|
| THERMAL | METRIC | RWT [QFN] | DRL [SOT] | |
| R θ JA | Junction-to-ambient thermal resistance | 95.7 | 132.7 | °C/W |
| R θ JC(top) | Junction-to-case (top) thermal resistance | 74.1 | 43.8 | °C/W |
| R θ JB | Junction-to-board thermal resistance | 29.4 | 27.3 | °C/W |
| ψ JT | Junction-to-top characterization parameter | 5.8 | 1.2 | °C/W |
| ψ JB | Junction-to-board characterization parameter | 29.7 | 26.6 | °C/W |
| R θ JC(bot) | Junction-to-case (bottom) thermal resistance | N/A | N/A | °C/W |
Typical Application
1
Related Variants
The following components are covered by the same datasheet.
| Part Number | Manufacturer | Package |
|---|---|---|
| TLV62585 | Texas Instruments | — |
| TLV62585DBV | Texas Instruments | — |
| TLV62585DRL | Texas Instruments | — |
| TLV62585DRLR | Texas Instruments | — |
| TLV62585DRLR.A | Texas Instruments | — |
| TLV62585DRLT | Texas Instruments | — |
| TLV62585DRLT.A | Texas Instruments | — |
| TLV62585PDRL | Texas Instruments | — |
| TLV62585PDRLR | Texas Instruments | — |
| TLV62585PDRLR.A | Texas Instruments | — |
| TLV62585PDRLT | Texas Instruments | — |
| TLV62585PDRLT.A | Texas Instruments | — |
| TLV62585RWT | Texas Instruments | — |
| TLV62585RWTR | Texas Instruments | — |
| TLV62585RWTR.A | Texas Instruments | — |
| TLV62585RWTT.A | Texas Instruments | — |
Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.
Get structured datasheet data via API
Get started free