SN74LVC2G07YZPR.B
Dual Buffer/Driver with Open-Drain OutputsThe SN74LVC2G07YZPR.B is a dual buffer/driver with open-drain outputs from Texas Instruments. View the full SN74LVC2G07YZPR.B datasheet below including key specifications, electrical characteristics, absolute maximum ratings.
SN74LVC2G07YZPR.B shares its datasheet with SN74LVC2G07, whose page lists every part number it covers.
Official SN74LVC2G07YZPR.B datasheet (PDF) — the source this page was extracted from.
Manufacturer
Texas InstrumentsCategory
Dual Buffer/Driver with Open-Drain Outputs
SN74LVC2G07YZPR.B Key Specifications
| Parameter | Value |
|---|---|
| Case/Package | SC |
| Contact Plating | Gold |
| Current - Output High, Low | 100µA, 32mA |
| Height | 1.1 mm |
| High Level Output Current | 32 mA |
| Lead Free | Lead Free |
| Length | 2 mm |
| Lifecycle Status | Production (Last Updated: 1 day ago) |
| Logic Function | Buffer, Inverting |
| Logic Type | Buffer, Non-Inverting |
| Low Level Output Current | 32 mA |
| Manufacturer Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Max Operating Temperature | 125 °C |
| Max Supply Voltage | 5.5 V |
| Min Operating Temperature | -40 °C |
| Min Supply Voltage | 1.65 V |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Number of Bits | 2 bit |
| Number of Bits per Element | 2 |
| Number of Bits per Element | 1 |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Number of Elements | 1 |
| Number of Elements | 2 |
| Number of Gates | 2 |
| Number of Input Lines | 2 |
| Number of Inputs | 2 |
| Number of Output Lines | 2 |
| Number of Outputs | 2 |
| Number of Pins | 6 |
| Operating Temperature | -55°C ~ 125°C (TA) |
| Output Type | Open Drain |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Packaging | MouseReel |
| Packaging | Cut Tape |
| Polarity | Non-Inverting |
| Propagation Delay | 2.9 ns |
| Quiescent Current | 10 µA |
| Radiation Hardening | No |
| REACH SVHC | Unaffected |
| RoHS | Compliant |
| Schedule B | 8542390000, 8542390000|8542390000|8542390000|8542390000|8542390000 |
| Standard Pack Qty | 3000 |
| Supplier Device Package | SC-70-6 |
| Termination | SMD/SMT |
| Thickness | 900 µm |
| Turn-On Delay Time | 8.6 ns |
| Supply Voltage | 1.65V ~ 5.5V |
| Width | 1.25 mm |
SN74LVC2G07YZPR.B Overview
Part: SN74LVC2G07 — Texas Instruments
Type: Dual Buffer/Driver with Open-Drain Outputs
Description: Dual open-drain buffer for 1.65–5.5 V VCC operation with 32 mA maximum sink current, 5.5 V tolerant inputs and outputs, and a maximum tpd of 3.7 ns at 3.3 V (−40 to 85 °C).
Operating Conditions:
- Supply voltage: 1.65–5.5 V (1.5 V minimum for data retention only)
- Operating free-air temperature: −40 to 125 °C
- Input and output voltage: 0–5.5 V
- Maximum IOL: 32 mA at VCC = 4.5 V
Absolute Maximum Ratings:
- Supply voltage (VCC): −0.5 to 6.5 V
- Input voltage (VI): −0.5 to 6.5 V
- Continuous output current (IO): ±50 mA
- Continuous current through VCC or GND: ±100 mA
- Storage temperature: −65 to 150 °C
Key Specs:
- VOL: 0.55 V max at IOL = 24 mA, VCC = 3 V; 0.55 V max at IOL = 32 mA, VCC = 4.5 V
- ICC: 10 μA max (VI = 5.5 V or GND, VCC = 1.65–5.5 V)
- Input leakage II: ±5 μA max (VI = 5.5 V or GND)
- Ioff: ±10 μA max (VI or VO = 5.5 V, VCC = 0 V)
- tpd (A to Y), −40 to 85 °C: 8.6 ns max at 1.8 V, 4.4 ns at 2.5 V, 3.7 ns at 3.3 V, 2.9 ns at 5 V
- tpd (A to Y), −40 to 125 °C: 8.6 ns max at 1.8 V, 4.9 ns at 2.5 V, 4.2 ns at 3.3 V, 3.4 ns at 5 V
- Input capacitance CI: 3.5 pF typical at VCC = 3.3 V
- Power dissipation capacitance Cpd: 4 pF typical at 3.3 V and 5 V (f = 10 MHz, TA = 25 °C)
- Thermal resistance RθJA: 165 °C/W (SOT-23), 259 °C/W (SC70)
Features:
- Dual open-drain buffer configuration
- Supports translation up and down
- Inputs and open-drain outputs accept voltages up to 5.5 V
- Ioff supports live insertion, partial-power-down mode and back-drive protection
- Latch-up performance exceeds 100 mA per JESD 78, Class II
- ESD protection: 2000 V HBM, 1000 V CDM
- Available in the NanoFree (DSBGA) package
Applications:
- Blu-ray players, DVD recorders and players, home theaters
- Desktop and notebook PCs, embedded PCs, tablets
- Mobile phones, portable media players, GPS personal navigation devices
- Digital video cameras, HDTV
- Network projector front ends, DLP front projection systems
- Enterprise solid state drives
- Portable audio docks
Package:
- SOT-23 (6), 2.90 mm × 1.60 mm
- SC70 (6), 2.00 mm × 1.25 mm
- DRY SON (6), 1.45 mm × 1.00 mm
- DSF SON (6), 1.00 mm × 1.00 mm
- DSBGA (6), 1.41 mm × 0.91 mm
SN74LVC2G07YZPR.B Features
- 1 · Dual Open-Drain Buffer Configuration
- -24-mA Output Drive at 3.3 V
- Support Translation-Up and Down
- Available in the Texas Instruments NanoFree™ Package
- Supports 5-V VCC Operation
- Inputs and Open-Drain Outputs Accept Voltages Up to 5.5 V
- Max tpd of 3.7 ns at 3.3 V
- Low Power Consumption, 10μ A Max ICC
- Typical VOLP (Output Ground Bounce) <0.8 V at VCC = 3.3 V, TA = 25°C
- Typical VOHV (Output VOH Undershoot) >2 V at VCC = 3.3 V, TA = 25°C
- I off Supports Live Insertion, Partial-Power-Down Mode, and Back-Drive Protection
- Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
- ESD Protection Exceeds JESD 22
- -2000-V Human-Body Model (A114-A)
- -200-V Machine Model (A115-A)
- -1000-V Charged-Device Model (C101)
SN74LVC2G07YZPR.B Applications
- Blu-ray Players and Home Theaters
- DVD Recorders and Players
- Desktops or Notebook PCs
- Digital Video Cameras (DVC)
- Embedded PCs
- GPS: Personal Navigation Devices
- Mobile Phones
- Network Projector Front Ends
- Portable Media Players
- Solid State Drive (SSD): Enterprise
- High-Definition (HDTV)
- Tablet: Enterprise
- Audio Dock: Portable
- DLP Front Projection System
1
SN74LVC2G07
SCES308L -AUGUST 2001-REVISED MAY 2015
SN74LVC2G07YZPR.B Pin Configuration
SN74LVC2G07YZPR.B Electrical Characteristics
over recommended operating free-air temperature range (unless otherwise noted)
| PARAMETER | TEST CONDITIONS | -40°C to 85°C - V CC | MIN | TYP (1) MAX | -40°C to 125°C - TYP (1) | MAX | UNIT |
|---|---|---|---|---|---|---|---|
| I OL = 100 μ A | 1.65 V to 5.5 V | 0.1 | 0.1 | V | |||
| I OL = 4 mA | 1.65 V | 0.45 | 0.45 | V | |||
| V | I OL = 8 mA | 2.3 V | 0.3 | 0.3 | V | ||
| OL | I OL = 16 mA | 3 V | 0.4 | 0.4 | V | ||
| I OL = 24 mA | 3 V | 0.55 | 0.55 | V | |||
| I OL = 32 mA | 4.5 V | 0.55 | 0.55 | V | |||
| I I A inputs | V I = 5.5 V or GND | 0 to 5.5 V | ±5 | ±5 | μ A | ||
| I off | V I or V O = 5.5 V | 0 | ±10 | ±10 | μ A | ||
| I CC | V I = 5.5 V or GND, | 1.65 V to 5.5 V | 10 | 10 | μ A | ||
| Δ I CC | One input at V CC - 0.6 V, Other inputs at V CC or GND | 3 V to 5.5 V | 500 | 500 | μ A | ||
| C I | V I = V CC or GND | 3.3 V | 3.5 | 3.5 | pF |
SN74LVC2G07YZPR.B Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted) (1)
| MIN | MAX | UNIT | |||
|---|---|---|---|---|---|
| V CC | Supply voltage | Supply voltage | -0.5 | 6.5 | V |
| V I | Input voltage (2) | Input voltage (2) | -0.5 | 6.5 | V |
| V O | Voltage applied to any output in the high-impedance or power-off state (2) | Voltage applied to any output in the high-impedance or power-off state (2) | -0.5 | 6.5 | V |
| V O | Voltage applied to any output in the high or low state (2)(3) | Voltage applied to any output in the high or low state (2)(3) | -0.5 | 6.5 | V |
| I IK | Input clamp current | V I < 0 | -50 | mA | |
| I OK | Output clamp current | V O < 0 | -50 | mA | |
| I O | Continuous output current | Continuous output current | ±50 | mA | |
| Continuous current through V CC or GND | Continuous current through V CC or GND | ±100 | mA | ||
| T stg | Storage Temperature | Storage Temperature | -65 | 150 | °C |
SN74LVC2G07YZPR.B Recommended Operating Conditions
| MIN | MAX | UNIT | |||
|---|---|---|---|---|---|
| V CC | Supply voltage | Operating | 1.65 | 5.5 | V |
| V CC | Data retention only | 1.5 | V | ||
| V IH | High-level input voltage | V CC = 1.65 V to 1.95 V | 0.65 × V CC | V | |
| V IH | V CC = 2.3 V to 2.7 V | 1.7 | V | ||
| V IH | V CC = 3 V to 3.6 V | 2 | V | ||
| V IH | V CC = 4.5 V to 5.5 V | 0.7 × V CC | V | ||
| V IL | Low-level input voltage | V CC = 1.65 V to 1.95 V | × V | 0.35 CC | V |
| V IL | Low-level input voltage | V CC = 2.3 V to 2.7 V | 0.7 | 0.35 CC | V |
| V IL | V CC = 3 V to 3.6 V | 0.8 | 0.35 CC | V | |
| V IL | V CC = 4.5 V to 5.5 V | 0.3 × V CC | 0.35 CC | V | |
| V I | Input voltage | Input voltage | 0 | 5.5 | V |
| V O | Output voltage | Output voltage | 0 | 5.5 | V |
| I OL | Low-level output current | V CC = 1.65 V | 4 | mA | |
| I OL | Low-level output current | V CC = 2.3 V | 8 | mA | |
| I OL | V CC = 3 V | 16 | mA | ||
| I OL | V CC = 3 V | 24 | mA | ||
| I OL | V CC = 4.5 V | 32 | mA | ||
| Δ t/ Δ v | Input transition rise or fall rate | V CC = 1.8 V ± 0.15 V, 2.5 V ± 0.2 V | 20 | ns/V | |
| Δ t/ Δ v | V CC = 3.3 V ± 0.3 V | 10 | ns/V | ||
| Δ t/ Δ v | V CC = 5 V ± 0.5 V | 5 |
SN74LVC2G07YZPR.B Thermal Information
| THERMAL METRIC (1) | SN74LVC2G07 - SOT-23 - 6 PINS | SN74LVC2G07 - SC70 - 6 PINS | SN74LVC2G07 - DRY (SON) - 6 PINS | SN74LVC2G07 - DSBGA - 6 PINS | SN74LVC2G07 - DSF (SON) - 6 PINS | UNIT | |
|---|---|---|---|---|---|---|---|
| R θ JA | Junction-to-ambient thermal resistance | 165 | 259 | 234 | 123 | 300 | °C/W |
SN74LVC2G07YZPR.B Typical Application
The SN74LVC2G07 is a high-drive CMOS device that can be used to implement a high output drive buffer, such as an LED application. It can sink 32 mA of current at 4.5 V making it ideal for high-drive and wired-OR/AND functions. The inputs are 5.5 V tolerant allowing it to translate up and down to VCC.
Variants on the same datasheet
These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.
| Part Number | Manufacturer | Package |
|---|---|---|
| SN74LVC2G07 | Texas Instruments | — |
| SN74LVC2G07-EP | Texas Instruments | — |
| SN74LVC2G07DBVR | Texas Instruments | SOT-23-6 |
| SN74LVC2G07DBVR.B | Texas Instruments | — |
| SN74LVC2G07DCKR | Texas Instruments | 6-TSSOP, SC-88, SOT-363 |
| SN74LVC2G07DCKR.B | Texas Instruments | — |
| SN74LVC2G07DCKT | Texas Instruments | 6-TSSOP, SC-88, SOT-363 |
| SN74LVC2G07DCKT.B | Texas Instruments | — |
| SN74LVC2G07DRYR | UMW | 6-UFDFN |
| SN74LVC2G07DRYR.B | Texas Instruments | — |
| SN74LVC2G07DSF2 | Texas Instruments | 6-XFDFN |
| SN74LVC2G07DSF2.B | Texas Instruments | — |
| SN74LVC2G07DSFR | Texas Instruments | 6-XFDFN |
| SN74LVC2G07DSFR.B | Texas Instruments | — |
| SN74LVC2G07YZPR | Texas Instruments | — |
More datasheets
Ask your AI agent about the SN74LVC2G07YZPR.B
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the SN74LVC2G07YZPR.B run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.