SN74AUP1G97DBVR
Configurable Multiple-Function GateThe SN74AUP1G97DBVR is a configurable multiple-function gate from Texas Instruments. View the full SN74AUP1G97DBVR datasheet below including key specifications, electrical characteristics, absolute maximum ratings.
SN74AUP1G97DBVR shares its datasheet with SN74AUP1G97, whose page lists every part number it covers.
Official SN74AUP1G97DBVR datasheet (PDF) — the source this page was extracted from.
Manufacturer
Texas InstrumentsCategory
Configurable Multiple-Function Gate
Package
SOT-23, SC70, SOT-5X3, SON, DSBGA
SN74AUP1G97DBVR Key Specifications
| Parameter | Value |
|---|---|
| Io Off Support | Yes (Partial-Power-Down Mode) |
| Input Capacitance | 1.5pF typ |
| Propagation Delay | 5.6ns max at 3.3V |
| Output Capacitance | 3pF |
| Esd Performance Cdm | 1000V |
| Esd Performance Hbm | 2000V |
| Supply Voltage Range | 0.8V to 3.6V |
| Input Voltage Tolerance | 3.6V |
| Static Power Consumption | 0.9mA max |
| Dynamic Power Consumption | 4.8pF typ at 3.3V |
| Operating Temperature Range | -40°C to 85°C |
SN74AUP1G97DBVR Overview
Part: SN74AUP1G97DRYR — Texas Instruments
Type: Low-Power Configurable Multiple-Function Gate
Description: 0.8–3.6 V low-power configurable multiple-function gate with Schmitt-trigger inputs, 5.6 ns max tpd at 3.3 V and 0.9 μA max ICC, in a QFN (DRY) package.
Operating Conditions:
- Supply voltage: 0.8–3.6 V
- Operating temperature: -40 to 85 °C
- Input voltage: 0–3.6 V
- Max output current (recommended): ±4 mA at VCC = 3 V
Absolute Maximum Ratings:
- Max supply voltage: 4.6 V
- Max input voltage: 4.6 V
- Continuous output current: ±20 mA
- Continuous current through VCC or GND: ±50 mA
- Storage temperature: -65 to 150 °C
Key Specs:
- ICC: 0.5 μA typ (25 °C), 0.9 μA max (-40 to 85 °C), VCC = 0.8–3.6 V
- tpd (A, B, or C to Y), CL = 5 pF, VCC = 3.3 V ± 0.3 V: 2.8 ns typ, 5.6 ns max (-40 to 85 °C)
- tpd at 0.8 V, CL = 5 pF: 23.1 ns (25 °C)
- VOH: VCC - 0.1 V min at IOH = -20 μA; 2.55 V min at IOH = -4 mA, VCC = 3 V (-40 to 85 °C)
- VOL: 0.1 V max at IOL = 20 μA; 0.45 V max at IOL = 4 mA, VCC = 3 V
- Input leakage II: 0.5 μA max (VI = GND to 3.6 V)
- Ioff: 0.6 μA max (-40 to 85 °C)
- Input capacitance Ci: 1.5 pF typ; Cpd: 4.8 pF typ at 3.3 V, 10 MHz
- Input hysteresis at VCC = 3 V: 0.79 V min, 1.31 V max
Features:
- Configurable as MUX, AND, OR, NAND, NOR, inverter or noninverting buffer
- Schmitt-trigger inputs for slow input transitions and better noise immunity
- 3.6-V I/O tolerant for mixed-mode signal operation
- Ioff supports partial-power-down mode operation
- Low noise: overshoot and undershoot <10% of VCC
- Latch-up performance exceeds 100 mA per JESD 78, Class II
- ESD: 2000-V HBM (A114-B, Class II), 1000-V CDM (C101)
Applications:
- Battery-powered portable equipment
- Point-to-point applications
Package:
- QFN – DRY, reel of 5000 (SN74AUP1G97DRYR)
- Other family packages: NanoStar WCSP (YFP, YZP), uQFN (DSF), SOT-23 (DBV), SC-70 (DCK), SOT-553 (DRL)
SN74AUP1G97DBVR Features
- Available in the Texas Instruments NanoStar™ Package
- Low Static-Power Consumption (ICC = 0.9 m A Max)
SN74AUP1G97DBVR Electrical Characteristics
over recommended operating free-air temperature range (unless otherwise noted)
| PARAMETER | TEST - CONDITIONS | V - CC | T A = 25°C - MIN TYP | T A = 25°C - MAX | T A = -40°C to 85°C - MIN | T A = -40°C to 85°C - MAX | UNIT |
|---|---|---|---|---|---|---|---|
| V T+ Positive-going input threshold voltage | 0.8 V | 0.3 | 0.6 | 0.3 | 0.6 | V | |
| 1.1 V | 0.53 | 0.9 | 0.53 | 0.9 | |||
| 1.4 V | 0.74 | 1.11 | 0.74 | 1.11 | |||
| 1.65 V | 0.91 | 1.29 | 0.91 | 1.29 | |||
| 2.3 V | 1.37 | 1.77 | 1.37 | 1.77 | |||
| 3 V | 1.88 | 2.29 | 1.88 | 2.29 | |||
| V T- Negative-going input threshold voltage | 0.8 V | 0.1 | 0.6 | 0.1 | 0.6 | V | |
| V T- Negative-going input threshold voltage | 1.1 V | 0.26 | 0.65 | 0.26 | 0.65 | V | |
| V T- Negative-going input threshold voltage | 1.4 V | 0.39 | 0.75 | 0.39 | 0.75 | V | |
| V T- Negative-going input threshold voltage | 1.65 V | 0.47 | 0.84 | 0.47 | 0.84 | V | |
| V T- Negative-going input threshold voltage | 2.3 V | 0.69 | 1.04 | 0.69 | 1.04 | V | |
| 3 V | 0.88 | 1.24 | 0.88 | 1.24 | |||
| Δ V T Hysteresis | 0.8 V | 0.07 | 0.5 | 0.07 | 0.5 | ||
| (V T+ - V T- ) | 1.1 V | 0.08 | 0.46 | 0.08 | 0.46 | V | |
| (V T+ - V T- ) | 1.4 V | 0.18 | 0.56 | 0.18 | 0.56 | V | |
| (V T+ - V T- ) | 1.65 V | 0.27 | 0.66 | 0.27 | 0.66 | V | |
| (V T+ - V T- ) | 2.3 V | 0.53 | 0.92 | 0.53 | 0.92 | V | |
| (V T+ - V T- ) | 3 V | 0.79 | 1.31 | 0.79 | 1.31 | V | |
| V OH | I OH = -20 m A | 0.8 V to 3.6 V | CC - 0.1 | CC - 0.1 | V | ||
| V OH | I OH = -1.1 mA | 1.1 V | 0.75 × V CC | 0.7 × V CC | V | ||
| V OH | I OH = -1.7 mA | 1.4 V | 1.11 | 1.03 | V | ||
| V OH | I OH = -1.9 mA | 1.65 V | 1.32 | 1.3 | V | ||
| V OH | I OH = -2.3 mA | 2.05 | 1.97 | V | |||
| V OH | I OH = -3.1 mA | 2.3 V | 1.9 | 1.85 | V | ||
| V OH | I OH = -2.7 mA | 2.72 | 2.67 | V | |||
| V OH | I OH = -4 mA | 3 V | 2.6 | 2.55 | V | ||
| V OL | I OL = 20 m A | 0.8 V to 3.6 V | 0.1 | 0.1 | V | ||
| V OL | I OL = 1.1 mA | 1.1 V | 0.3 × V CC | 0.3 × V CC | V | ||
| V OL | I OL = 1.7 mA | 1.4 V | 0.31 | 0.37 | V | ||
| V OL | I OL = 1.9 mA | 1.65 V | 0.31 | 0.35 | V | ||
| I OL = 2.3 mA | 0.31 | 0.33 | V | ||||
| I OL = 3.1 mA | 2.3 V | 0.44 | 0.45 | V | |||
| I OL = 2.7 mA | 0.31 | 0.33 | V | ||||
| I OL = 4 mA | 3 V | 0.44 | 0.45 | V | |||
| I I All inputs | V I = GND to 3.6 V | 0 V to 3.6 V | 0.1 | 0.5 | m A | ||
| I off | V I or V O = 0 V to 3.6 V | 0 V | 0.2 | 0.6 | m A | ||
| Δ I off | V I or V O = 0 V to 3.6 V | 0 V to 0.2 V | 0.2 | 0.6 | m A | ||
| I CC | V I = GND or (V CC to 3.6 V), I O = 0 | 0.8 V to 3.6 V | 0.5 | 0.9 | m A | ||
| Δ I CC | V I = V CC - 0.6 V (1) , I O = 0 | 3.3 V | 40 | 50 | m A | ||
| C i | V I = V CC or GND | 0 V | 1.5 | pF | |||
| C o | V O = GND | 0 V | 3 | pF |
over recommended operating free-air temperature range, CL = 5 pF (unless otherwise noted) (see Figure 10 and Figure 11)
| PARAMETER | FROM (INPUT) | TO - (OUTPUT) | V CC | T A = 25°C - MIN | T A = 25°C - TYP | T A = 25°C - MAX | T A = -40°C to 85°C - MIN | T A = -40°C to 85°C - MAX | UNIT |
|---|---|---|---|---|---|---|---|---|---|
| t pd | A, B, or C | Y | 0.8 V | 23.1 | 23.1 | 23.1 | ns | ||
| t pd | A, B, or C | Y | 1.2 V ± 0.1 V | 3.1 | 9.1 | 13.9 | 2.6 | 17.6 | ns |
| t pd | A, B, or C | Y | 1.5 V ± 0.1 V | 2.1 | 6.4 | 9.4 | 1.6 | 11.4 | ns |
| t pd | A, B, or C | Y | 1.8 V ± 0.15 V | 1.6 | 5.1 | 7.5 | 1.1 | 9.2 | ns |
| t pd | A, B, or C | Y | 2.5 V ± 0.2 V | 1.1 | 3.6 | 5.7 | 0.6 | 6.8 | ns |
| t pd | A, B, or C | Y | 3.3 V ± 0.3 V | 1 | 2.8 | 4.7 | 0.5 | 5.6 | ns |
over recommended operating free-air temperature range, CL = 10 pF (unless otherwise noted) (see Figure 10 and Figure 11)
| PARAMETER | FROM - (INPUT) | TO - (OUTPUT) | V CC | T A = 25°C - MIN | T A = 25°C - TYP | T A = 25°C - MAX | T A = -40°C to 85°C - MIN | T A = -40°C to 85°C - MAX | UNIT |
|---|---|---|---|---|---|---|---|---|---|
| t pd | A, B, or C | Y | 0.8 V | 26.2 | ns | ||||
| t pd | A, B, or C | Y | 1.2 V ± 0.1 V | 5.2 | 10.4 | 15.4 | 4.7 | 19.2 | ns |
| t pd | A, B, or C | Y | 1.5 V ± 0.1 V | 4 | 7.4 | 10.7 | 3.5 | 12.7 | ns |
| t pd | A, B, or C | Y | 1.8 V ± 0.15 V | 3.1 | 6 | 8.6 | 2.6 | 10.5 | ns |
| t pd | A, B, or C | Y | 2.5 V ± 0.2 V | 2.7 | 4.3 | 6.5 | 2.2 | 7.8 | ns |
| t pd | A, B, or C | Y | 3.3 V ± 0.3 V | 2.5 | 3.4 | 5.4 | 2 | 6.4 | ns |
over recommended operating free-air temperature range, CL = 15 pF (unless otherwise noted) (see Figure 10 and Figure 11)
| PARAMETER | FROM (INPUT) | TO (OUTPUT) | V CC | T A = 25°C - MIN | T A = 25°C - TYP | T A = 25°C - MAX | T A = -40°C to 85°C - MIN | T A = -40°C to 85°C - MAX | UNIT |
|---|---|---|---|---|---|---|---|---|---|
| t pd | A, B, or C | Y | 0.8 V | 28.9 | 28.9 | 28.9 | ns | ||
| t pd | A, B, or C | Y | 1.2 V ± 0.1 V | 4.1 | 11.5 | 16.8 | 3.6 | 21.3 | ns |
| t pd | A, B, or C | Y | 1.5 V ± 0.1 V | 3 | 8.3 | 11.8 | 2.5 | 14.1 | ns |
| t pd | A, B, or C | Y | 1.8 V ± 0.15 V | 2.3 | 6.7 | 9.5 | 1.8 | 11.6 | ns |
| t pd | A, B, or C | Y | 2.5 V ± 0.2 V | 1.7 | 4.8 | 7.2 | 1.2 | 8.6 | ns |
| t pd | A, B, or C | Y | 3.3 V ± 0.3 V | 1.4 | 3.9 | 6 | 0.9 | 7.1 | ns |
over recommended operating free-air temperature range, CL = 30 pF (unless otherwise noted) (see Figure 10 and Figure 11)
| PARAMETER | FROM - (INPUT) | TO (OUTPUT) | V CC | T A = 25°C - MIN | T A = 25°C - TYP | T A = 25°C - MAX | T A = -40°C to 85°C - MIN | T A = -40°C to 85°C - MAX | UNIT |
|---|---|---|---|---|---|---|---|---|---|
| t pd | A, B, or C | Y | 0.8 V | 36.7 | ns | ||||
| t pd | A, B, or C | Y | 1.2 V ± 0.1 V | 5.5 | 14.6 | 21.4 | 5 | 26.7 | ns |
| t pd | A, B, or C | Y | 1.5 V ± 0.1 V | 4.1 | 10.5 | 14.8 | 3.6 | 17.7 | ns |
| t pd | A, B, or C | Y | 1.8 V ± 0.15 V | 3.3 | 8.6 | 11.8 | 2.8 | 14.5 | ns |
| t pd | A, B, or C | Y | 2.5 V ± 0.2 V | 2.5 | 6.3 | 8.8 | 2 | 10.6 | ns |
| t pd | A, B, or C | Y | 3.3 V ± 0.3 V | 2.1 | 5.1 | 7.3 | 1.6 | 8.8 | ns |
SN74AUP1G97DBVR Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted)
| MIN | MAX | UNIT | |||
|---|---|---|---|---|---|
| V CC | Supply voltage range | Supply voltage range | -0.5 | 4.6 | V |
| V I | Input voltage range (2) | Input voltage range (2) | -0.5 | 4.6 | V |
| V O | Voltage range applied to any output in the high-impedance or power-off state | Voltage range applied to any output in the high-impedance or power-off state | -0.5 | 4.6 | V |
| V O | Output voltage range in the high or low state (2) | Output voltage range in the high or low state (2) | -0.5 | V CC + 0.5 | V |
| I IK | Input clamp current | V I < 0 | -50 | mA | |
| I OK | Output clamp current | V O < 0 | -50 | mA | |
| I O | Continuous output current | Continuous output current | ±20 | mA | |
| Continuous current through V CC or GND | Continuous current through V CC or GND | ±50 | mA | ||
| DBV package | 165 | °C/W | |||
| DCK package | 259 | °C/W | |||
| DRL package | 142 | °C/W | |||
| q JA | Package thermal impedance (3) | DSF package DRY package YFP package YZP package | 300 234 123 123 | ||
| T stg | Storage temperature range | Storage temperature range | -65 | 150 | °C |
SN74AUP1G97DBVR Recommended Operating Conditions
| MIN | MAX | UNIT | ||
|---|---|---|---|---|
| V CC Supply voltage | V CC Supply voltage | 0.8 | 3.6 | V |
| Input voltage | Input voltage | 0 | 3.6 | V |
| Output voltage | Output voltage | 0 | V CC | V |
| High-level | V CC = 0.8 V | -20 | m A | |
| High-level | V CC = 1.1 V | -1.1 | ||
| High-level | V CC = 1.4 V | -1.7 | ||
| I OH | V CC = 1.65 V CC = 2.3 V V CC = 3 V | -1.9 -3.1 -4 | mA | |
| V CC = 0.8 V V CC = 1.1 V | 20 1.1 | m A | ||
| Low-level | V CC = 1.4 V | 1.7 | ||
| I OL | V CC = 1.65 V V CC = 2.3 V V CC = 3 V | 1.9 3.1 4 | mA | |
| T A Operating | -40 | 85 | °C |
Variants on the same datasheet
These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.
| Part Number | Manufacturer | Package |
|---|---|---|
| SN74AUP1G97 | Texas Instruments | SOT-23-6 |
| SN74AUP1G97DBVT | Texas Instruments | SOT-23-6 |
| SN74AUP1G97DCKR | Texas Instruments | SC-70-6 |
| SN74AUP1G97DCKT | Texas Instruments | SC70-6 |
| SN74AUP1G97DRLR | Texas Instruments | SOT-553-6 |
| SN74AUP1G97DRYR | Texas Instruments | 6-UFDFN |
| SN74AUP1G97DSFR | Texas Instruments | uQFN-6 |
| SN74AUP1G97YFPR | Texas Instruments | DSBGA-6 |
| SN74AUP1G97YZPR | Texas Instruments | DSBGA-6 |
More datasheets
Ask your AI agent about the SN74AUP1G97DBVR
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the SN74AUP1G97DBVR run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.