SN74AHCT125
Quadruple Bus Buffer Gate with 3-State OutputsThe SN74AHCT125 is a quadruple bus buffer gate with 3-state outputs from Texas Instruments. View the full SN74AHCT125 datasheet below including key specifications, pinout, electrical characteristics, absolute maximum ratings.
Official SN74AHCT125 datasheet (PDF) — the source this page was extracted from.
Manufacturer
Texas InstrumentsCategory
Quadruple Bus Buffer Gate with 3-State Outputs
Package
J (CDIP, 14), W (CFP, 14), FK (LCCC, 20), D (SOIC, 14), DB (SSOP, 14), DGV (TVSOP, 14), N (PDIP, 14), NS (SOP, 14), PW (SOP, 14), RGY (VQFN, 14), BQA (WQFN, 14)
SN74AHCT125 Key Specifications
| Parameter | Value |
|---|---|
| Pin Count | 14 |
| Output Type | 3-state |
| Number Of Channels | 4 |
| Latch-Up Performance | Exceeds 250mA per JESD 17 |
| Input Capacitance (Ci) | 10pF max |
| Supply Voltage Range (VCC) | 4.5V to 5.5V |
| Low-Level Input Voltage (VIL) | 0.8V max |
| High-Level Input Voltage (VIH) | 2V min |
| Low-Level Output Current (IOL) | 8mA |
| Quiescent Supply Current (ICC) | 20µA max (SN74) |
| High-Level Output Current (IOH) | -8mA |
| Propagation Delay (TPLH/TPHL, A To Y) | 6.5ns max (VCC = 5V ± 0.5V, CL = 15pF) |
| Operating Temperature Range (SN74AHCT125) | -40°C to 85°C |
SN74AHCT125 Overview
Part: SN54AHCT125 / SN74AHCT125 — Texas Instruments
Type: Quadruple Bus Buffer Gate with 3-State Outputs
Description: Quadruple bus buffer gates with independent active-low output enables, TTL-compatible inputs, 4.5–5.5 V supply, and ±8 mA output drive. Maximum tpd is 6.5 ns at 15 pF.
Operating Conditions:
- Supply voltage: 4.5–5.5 V
- Operating temperature: -40 to 85 °C (SN74AHCT125); -55 to 125 °C (SN54AHCT125)
- High-level input voltage: 2 V min; low-level input voltage: 0.8 V max
- Output current: ±8 mA (IOH/IOL)
- Input transition rate: 20 ns/V max
Absolute Maximum Ratings:
- Supply voltage range (VCC): -0.5 to 7 V
- Input voltage range: -0.5 to 7 V
- Output voltage range: -0.5 to VCC + 0.5 V
- Continuous output current: ±25 mA
- Continuous current through VCC or GND: ±50 mA
- Storage temperature: -65 to 150 °C
Key Specs:
- VOH: 3.8 V min at IOH = -8 mA, VCC = 4.5 V (over temperature)
- VOL: 0.44 V max at IOL = 8 mA, VCC = 4.5 V (over temperature)
- Input leakage II: ±1 μA max (VI = 5.5 V or GND)
- Off-state output current IOZ: ±2.5 μA max (VCC = 5.5 V)
- Supply current ICC: 20 μA max (VCC = 5.5 V, over temperature)
- ΔICC: 1.5 mA max (one input at 3.4 V, VCC = 5.5 V)
- tpd (A to Y): 6.5 ns max at CL = 15 pF; 8.5 ns max at CL = 50 pF (VCC = 5 V ± 0.5 V)
- Input capacitance Ci: 10 pF max; power dissipation capacitance Cpd: 14 pF typ
Features:
- Inputs are TTL-voltage compatible
- Latch-up performance exceeds 250 mA per JESD 17
- Independent 3-state outputs, each with its own active-low output enable
- Available in military (SN54) and commercial (SN74) grades
Applications:
- Enable or disable a digital signal
- Controlling an indicator LED
- Debounce a switch
- Eliminate slow or noisy input signals
Package:
- SN74AHCT125: D (SOIC, 14), DB (SSOP, 14), DGV (TVSOP, 14), N (PDIP, 14), NS (SOP, 14), PW (TSSOP, 14), RGY (VQFN, 14), BQA (WQFN, 14)
- SN54AHCT125: J (CDIP, 14), W (CFP, 14), FK (LCCC, 20)
SN74AHCT125 Features
- Inputs are TTL-voltage compatible
- Latch-up performance exceeds 250mA per JESD 17
SN74AHCT125 Applications
SN74AHCT125 Pin Configuration
| Pin | Name | Type | Description |
|---|---|---|---|
| 1 | 1OE | I | Output enable for gate 1 |
| 2 | 1A | I | Gate 1 input |
| 3 | 1Y | O | Gate 1 output |
| 4 | 2OE | I | Output enable for gate 2 |
| 5 | 2A | I | Gate 2 input |
| 6 | 2Y | O | Gate 2 output |
| 7 | GND | — | Ground pin |
| 8 | 3Y | O | Gate 3 output |
| 9 | 3A | I | Gate 3 input |
| 10 | 3OE | I | Output enable for gate 3 |
| 11 | 4Y | O | Gate 4 output |
| 12 | 4A | I | Gate 4 input |
| 13 | 4OE | I | Output enable for gate 4 |
| 14 | VCC | — | Power pin |
SN74AHCT125 Electrical Characteristics
over operating free-air temperature range (unless otherwise noted)
| PARAMETER | TEST CONDITIONS | V CC | T A = 25°C - MIN | T A = 25°C - TYP | T A = 25°C - MAX | SN54AHCT125 - MIN | SN54AHCT125 - MAX | SN74AHCT125 - MIN MAX | UNIT |
|---|---|---|---|---|---|---|---|---|---|
| V OH | I OH = -50 μA | 4.5 V | 4.4 | 4.5 | 4.4 | 4.4 | V | ||
| V OH | I OH = -8 mA | 4.5 V | 3.94 | 3.8 | 3.8 | V | |||
| V OL | I OL = 50 μA | 4.5 V | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | V | |
| V OL | I OL = 8 mA | 4.5 V | 0.36 | 0.36 | 0.36 | 0.44 | 0.44 | V | |
| I I | V I = 5.5 V or GND | 0 V to 5.5 V | ±0.1 | ±0.1 | ±0.1 | ±1 (1) | ±1 | μA | |
| I OZ | V O = V CC or GND | 5.5 V | ±0.25 | ±0.25 | ±0.25 | ±2.5 | ±2.5 | μA | |
| I CC | V I = V CC or GND, I O = 0 | 5.5 V | 2 | 2 | 2 | 20 | 20 | μA | |
| ΔI CC (2) | One input at 3.4 V, Other inputs at V CC or GND | 5.5 V | 1.35 | 1.35 | 1.35 | 1.5 | 1.5 | mA | |
| C i | V I = V CC or GND | 5 V | 4 10 | 4 10 | 4 10 | 10 | pF | ||
| C o | V O = V CC or GND | 5 V | 15 | 15 | 15 | pF |
SN74AHCT125 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted) (1)
| MIN | MAX | UNIT | |||
|---|---|---|---|---|---|
| V CC | Supply voltage range | -0.5 | 7 | V | |
| V I | Input voltage range (2) | -0.5 | 7 | V | |
| V O | Output voltage range (2) | -0.5 | V CC + 0.5 | V | |
| I IK | Input clamp current | V I < 0 | -20 | mA | |
| I OK | Output clamp current | V O < 0 or V O > V CC | ±20 | mA | |
| I O | Continuous output current | V O = 0 to V CC | ±25 | mA | |
| Continuous current through V CC or GND | ±50 | mA | |||
| T stg | Storage temperature range | -65 | 150 | °C |
SN74AHCT125 Recommended Operating Conditions
| SN54AHCT125 - MIN | SN54AHCT125 - MAX | SN74AHCT125 - MIN | SN74AHCT125 - MAX | UNIT | ||
|---|---|---|---|---|---|---|
| V CC | Supply voltage | 4.5 | 5.5 | 4.5 | 5.5 | V |
| V IH | High-level input voltage | 2 | 2 | V | ||
| V IL | Low-level input voltage | 0.8 | 0.8 | V | ||
| V I | Input voltage | 0 | 5.5 | 0 | 5.5 | V |
| V O | Output voltage | 0 | V CC | 0 | V CC | V |
| I OH | High-level output current | -8 | -8 | mA | ||
| I OL | Low-level output current | 8 | 8 | mA | ||
| Δt/Δv | Input transition rise or fall rate | 20 | 20 | ns/V | ||
| T A | Operating free-air temperature | -55 | 125 | -40 | 85 | °C |
SN74AHCT125 Thermal Information
| THERMAL METRIC (1) | THERMAL METRIC (1) | SNx4AHCT125 - D (SOIC) - 14 | SNx4AHCT125 - DB (SSOP) - 14 | SNx4AHCT125 - DGV (TVSOP) - 14 | SNx4AHCT125 - N (PDIP) - 14 | SNx4AHCT125 - NS (SO) - 14 | SNx4AHCT125 - PW (TSSOP) - 14 | SNx4AHCT125 - RGY (VQFN) - 14 | SNx4AHCT125 - BQA (WQFN) - 14 | UNIT |
|---|---|---|---|---|---|---|---|---|---|---|
| θ JA | Package thermal impedance | 124.5 | 96 | 127 | 80 | 76 | 147.7 | 87.1 | 88.3 | °C/W |
SN74AHCT125 Typical Application
In this application, a buffer with a 3-state output is used to disable a data signal as shown in Figure 8-1. The remaining three buffers can be used for signal conditioning in other places in the system, or the inputs can be grounded and the channels left unused.
SN74AHCT125 Ordering Information
| PART NUMBER | RATING | PACKAGE |
|---|---|---|
| SN54AHCT125 | Military | J (CDIP, 14) |
| SN54AHCT125 | Military | W (CFP, 14) |
| SN54AHCT125 | Military | FK (LCCC, 20) |
| SN74AHCT125 | Commercial | D (SOIC, 14) |
| SN74AHCT125 | Commercial | DB (SSOP, 14) |
| SN74AHCT125 | Commercial | DGV (TVSOP, 14) |
| SN74AHCT125 | Commercial | N (PDIP, 14) |
| SN74AHCT125 | Commercial | NS (SOP, 14) |
| SN74AHCT125 | Commercial | PW (SOP, 14) |
| SN74AHCT125 | Commercial | RGY (VQFN, 14) |
| SN74AHCT125 | Commercial | BQA (WQFN, 14) |
Variants on the same datasheet
These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.
| Part Number | Manufacturer | Package |
|---|---|---|
| SN54AHCT125 | Texas Instruments | FK (LCCC, 20) |
More datasheets
Ask your AI agent about the SN74AHCT125
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the SN74AHCT125 run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.