SMA-KE-P902

RF Coaxial Connector

The SMA-KE-P902 is a rf coaxial connector from Shenzhen Dreamlink Technology Co., LTD. View the full SMA-KE-P902 datasheet below including key specifications.

Official SMA-KE-P902 datasheet (PDF) — the source this page was extracted from.

Manufacturer

Shenzhen Dreamlink Technology Co., LTD

SMA-KE-P902 Key Specifications

Parameter	Value
VSWR	≤1.5
Material	Brass
Impedance	50 Ohm
Connector Type	External Thread Female Head, Inner Hole Half Thread
Surface Plating	Gold
Max Working Voltage	335 V
Operating Frequency	0-6 GHz
Insulation Resistance	5000 Mohm
Outer Contact Resistance	≤2 mohm
Center Contact Resistance	3 Mohm
Operating Temperature Range	-55 °C to +125 °C

SMA-KE-P902 Overview

Part: SMA-KE-P902 — Shenzhen Dreamlink Technology Co., LTD

Type: RF Coaxial Connector

Description: 50 Ohm SMA-KE right-angle coaxial connector with 0-6 GHz operating frequency, ≤1.5 S.W.R., and a maximum working voltage of 335 V.

Operating Conditions:

Supply voltage: not applicable
Operating temperature: -55 to +125 °C
Operating frequency: 0-6 GHz

Absolute Maximum Ratings:

Max supply voltage: 335 V

Key Specs:

Impedance: 50 Ohm
Operating Frequency: 0-6 GHz
S.W.R.: ≤1.5
Working Voltage: 335 V/max
Insulation Resistance: 5000 Mohm
Center Contact Resistance: 3 Mohm
Outer Contact Resistance: ≤2 mohm

Features:

External Thread Female Head
Inner Hole Half Thread
Right Angle (180 degrees)
P Offset Four-corner
Brass material
Gold surface plating

Package:

SMA-KE Right Angle

Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Ask your AI agent about the SMA-KE-P902

Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.

claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp

Then ask: "Can the SMA-KE-P902 run from my 12 V rail? Check it against the datasheet limits."

Create a free account $2 of usage every month, no card needed.