SLM3XX
Wireless Communication ModuleThe SLM3XX is a wireless communication module from MeiG Smart Technology. View the full SLM3XX datasheet below including key specifications.
Manufacturer
MeiG Smart Technology
Category
RF / WirelessKey Specifications
| Parameter | Value |
|---|---|
| MQTT Topic Max Length | 256 bytes |
| Communication Interface | AT Command Interface |
| MQTT Keepalive Interval | 30 to 1800 seconds |
| MQTT Message Max Length | 2048 bytes |
| MQTT QoS Levels Supported | 0, 1, 2 |
Overview
Part: SLM3XX Series — MeiG Smart Technology Co., Ltd
Type: AT Commands Manual for Cellular Modules
Description: A comprehensive manual detailing common AT commands for the MeiG Smart Technology SLM3XX series cellular modules, covering general module control, SIM card management, network configuration, and data transfer functionalities.
Features:
- General AT commands for module configuration and status reporting
- SIM card management commands, including hot-plug and switching functions
- Network-related commands for band setting, cell locking, and signal quality
- Data transfer commands for PDP context definition and control surface data
- Audio control commands (e.g., UE volume, DTMF tone, MIC gain)
- Power management commands (e.g., battery charging, low clock mode)
- Trace control and extended error reporting
- USB remote wakeup functionality
Features
Configure and query EDRX parameters.
| Command Type | Command | Possible Response |
|---|---|---|
| Test Command | AT+CFGEDRX=? | +CFGEDRX: enable=[0-1], edrxPtw=[0-15], edrxValue=[0-15] OK |
| Read Command | AT+CFGEDRX? | +CFGEDRX: [,[,<edrx_val>]] OK |
| Write Command | AT+CFGEDRX=[[,[ ,<edrx_val>]]] | OK |
- integer, Value range [0-1], configured to support EDRX functionality.
- 0 eDRX is not supported, and and <edrx_val> are invalid when the value is taken;
- 1 Support eDRX;
////The following examples show the typical application for this command. AT+CFGEDRX=? +CFGEDRX: enable=[0-1], edrxPtw=[0-15],edrxValue=[0-15] OK AT+CFGEDRX? +CFGEDRX: 0, ptw=0, edrxVal=0 OK AT+CFGEDRX=0,1,1 OK
Related Variants
The following components are covered by the same datasheet.
Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.
Get structured datasheet data via API
Get started free