SIM8075-6-1-12-00-A

Part: SIM8075

Type: Nano SIM Card Connector

Description: 6-pin SMT push-push type Nano SIM card connector with a low 1.20 mm profile rated for 0.5 A and 30 V AC/DC.

Operating Conditions:

• Supply voltage: 30 V AC/DC max
• Operating temperature: -40°C to +75°C
• Current rating: 0.5 A

Key Specs:

• Contact resistance (initial/final): 100 mΩ max (EIA-364-23, 10 mA max test current, 20 mV open circuit)
• Insulation resistance: 1000 MΩ min at 500 V DC for 1 minute (EIA-364-21)
• Dielectric strength: 500 V AC for 1 minute, 1.0 mA max leakage (EIA-364-20)
• Durability: 5000 cycles (push-in / push-out with Nano SIM card at 500 ± 50 cycles/hour)
• Temperature rise: 30°C max at rated current
• Peak reflow soldering temperature: 255°C (-0/+5°C)

Features:

• Push-push mating/ejection mechanism
• Low-profile 1.20 mm height
• SMT mount configuration
• Pb-free reflow solder compatible

Applications:

• Nano SIM card interface connections

Package:

• SMT, 6-pin, 1.20 mm profile

Package: SMT, Nano SIM Card Connector, Push-Push Type, 6-Pin, 1.20mm Profile (SIM8075)

I could not find a pin table or pin diagram in the provided datasheet section. The attached images are the GCT logo and the reflow temperature profile figure (Fig 1.0), which do not show pin assignments. The text only states that the connector is 6-pin and refers to "drawing" for dimensions, but no pin names or functions are given.

Notes

• Pin numbering and pin names could not be determined from the provided material. The connector is stated to have 6 pins.
• No pin diagram was included in the attached images. The mechanical drawing referenced in Section 3.0 ("Please refer to drawing") would be needed to obtain the pin assignments.
• Standard Nano SIM connectors typically carry the signals VCC, RST, CLK, GND, VPP, and I/O, but this is not confirmed by the supplied datasheet and should not be used without verification against the GCT product drawing.