SI47951A2GE2AM
Automotive AM/FM Radio ReceiverThe SI47951A2GE2AM is a automotive am/fm radio receiver from Skyworks Solutions. View the full SI47951A2GE2AM datasheet below including key specifications.
Official SI47951A2GE2AM datasheet (PDF) — the source this page was extracted from.
Manufacturer
Skyworks SolutionsCategory
Automotive AM/FM Radio Receiver
Package
QFN-56 8x8mm
Lifecycle
Active
SI47951A2GE2AM Key Specifications
| Parameter | Value |
|---|---|
| Antenna Connector | Not Included |
| Applications | AM/FM Radio Receiver |
| Data Interface | I2C, I2S, SPI |
| Features | Automatic Tuning |
| Frequency | 144kHz ~ 288kHz, 520kHz ~ 1.71MHz, 2.3MHz ~ 30MHz, 64MHz ~ 108MHz, 170MHz ~ 240MHz |
| Modulation or Protocol | AM, FM, RDS, SW-LW |
| Mounting Type | Surface Mount |
| Package / Case | 56-VFQFN Exposed Pad |
| Supplier Device Package | 56-QFN (8x8) |
| Supply Voltage | 1.8V, 3.3V |
SI47951A2GE2AM Overview
Part: Si47951/52 — Skyworks Solutions, Inc.
Type: Automotive AM/FM Radio Receiver and Digital Radio Tuner
Description: Highly integrated automotive broadcast radio tuner supporting AM/FM, LW, SW, NOAA, and digital radio standards (HD Radio, DAB/DAB+/DMB, DRM) with digital I/Q interfaces and integrated audio outputs.
Operating Conditions:
- Analog power supply: 3.3 V
- Digital power supply: 1.8 V
- Digital I/O power supply: 1.8 V or 3.3 V
Key Specs:
- FM frequency range: 64–108 MHz
- AM frequency range: 520–1710 kHz
- LW frequency range: 144–288 kHz
- SW frequency range: 2.3–30 MHz
- DAB/DAB+/DMB frequency range (Si47952 only): 170–240 MHz (Band III)
- Analog audio outputs: 2 channels
- Digital audio ports: 2 (I2S)
Features:
- On-chip soft-decision RDS/RDBS demodulator/decoder
- Integrated active AM/FM and Band III buffers
- Fully integrated AGC
- Digital I/Q interface to HD Radio, DRM, and DAB/DAB+/DMB processors
- DRM30/DRM+ detect and support (Si47952 only)
- Integrated clock oscillator
- Fast FM HD Radio and DAB/DAB+/DMB band scan
- AEC-Q100 qualified (A-grade parts)
Applications:
- OEM automotive infotainment systems
- Aftermarket car radio systems
Package:
- 56-pin QFN (8 × 8 × 0.85 mm, 0.5 mm pitch)
SI47951A2GE2AM Features
- Worldwide FM band support (64-108 MHz)
- Worldwide AM band support (520-1710 kHz)
- LW band support (144-288 kHz)
- DAB/DAB+/DMB support (Si47952 only) (170-240 MHz)
- SW band support (2.3-30 MHz)
- NOAA Weather band support
- On-chip soft-decision RDS/RDBS demodulator/decoder
- AM/FM
- Comprehensive AM/FM signal processing firmware
- Integrated active AM/FM buffers
- Fully integrated AGC
- HD Radio
- Digital I/Q interface to HD Radio Processor
- Fast FM HD Radio band scan
- DRM30/DRM+ (Si47952 only)
- DRM detect
- Digital I/Q interface to DRM processor
- Fully integrated AGC
- DAB/DAB+/DMB (Si47952 only)
- Digital I/Q interface to DAB/DAB+/DMB processor
- Integrated active Band III buffer
- Fast DAB/DAB+/DMB band scan
- Fully integrated AGC for Band III
- Two analog audio outputs
- Two digital audio ports (I 2 S)
- Integrated clock oscillator
- 1.8 V or 3.3 V digital IO power supplies
- 3.3 V analog power supply and 1.8 V digital power supply
- QFN 56-pin, 8x8x0.85 mm
- Pb-free/RoHS compliant
- AEC-Q100 qualified (A-grade parts)
SI47951A2GE2AM Applications
- OEM automotive infotainment systems
- Aftermarket car radio systems
1
SI47951A2GE2AM Pin Configuration
Figure 1.1. Si47951-52 Pinout Diagram
2
SI47951A2GE2AM Package Information
Figure 2.2. 56-Pin QFN
3
4
Table 2.1. Package Dimensions
| Dimensions | Min | Nom | Max |
|---|---|---|---|
| A | 0.80 | 0.85 | 0.90 |
| A1 | 0.00 | 0.035 | 0.05 |
| b | 0.20 | 0.25 | 0.30 |
| A3 | 0.203 REF | 0.203 REF | 0.203 REF |
| D | 8.00 BSC | 8.00 BSC | 8.00 BSC |
| e | 0.5 BSC | 0.5 BSC | 0.5 BSC |
| E | 8.00 BSC. | 8.00 BSC. | 8.00 BSC. |
| D2 | 6.30 | 6.40 | 6.50 |
| E2 | 6.30 | 6.40 | 6.50 |
| L | 0.35 | 0.40 | 0.45 |
| K | 0.20 | - | - |
| aaa | 0.10 | 0.10 | 0.10 |
| bbb | 0.10 | 0.10 | 0.10 |
| ccc | 0.08 | 0.08 | 0.08 |
| ddd | 0.10 | 0.10 | 0.10 |
| eee | 0.10 | 0.10 | 0.10 |
Variants on the same datasheet
These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.
| Part Number | Manufacturer | Package |
|---|---|---|
| SI47951A2GE1AM | Skyworks Solutions | 56-VFQFN Exposed Pad |
| SI47951A2GE1AMR | Skyworks Solutions | 56-VFQFN Exposed Pad |
| SI47951A2GE1GM | Skyworks Solutions | 56-VFQFN Exposed Pad |
| SI47951A2GE1GMR | Skyworks Solutions | 56-VFQFN Exposed Pad |
| SI47951A2GE2AMR | Skyworks Solutions | 56-VFQFN Exposed Pad |
| SI47952 | Skyworks Solutions | QFN-56 8x8mm |
More datasheets
Ask your AI agent about the SI47951A2GE2AM
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the SI47951A2GE2AM run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.