Skip to main content

We use cookies to understand how you use our site and improve your experience. See our Privacy Policy.

SGM2036S

Low Dropout Linear Regulator

The SGM2036S is a low dropout linear regulator from SG Micro. View the full SGM2036S datasheet below including key specifications, electrical characteristics, absolute maximum ratings.

Official SGM2036S datasheet (PDF) — the source this page was extracted from.

Manufacturer

SG Micro

Category

Low Dropout Linear Regulator

SGM2036S Key Specifications

ParameterValue
Dropout Voltage420 mV
Height - Seated (Max)400 µm
Length1 mm
Lifecycle StatusProduction (Last Updated: 1 month ago)
Max Input Voltage5.5 V
Max Junction Temperature (Tj)125 °C
Max Output Voltage1.854 V
Min Input Voltage2.3 V
Min Output Voltage1.746 V
Number of Circuits1
Number of Outputs1
Number of Terminals4
Part SeriesSGM2036
REACH SVHCUnaffected
RoHSCompliant
Terminal Pitch650 µm
Voltage Tolerance3 %
Width1 mm

SGM2036S Overview

Part: SGM2036S-1.8XXDH4G/TR — SG Micro Corp (SGMICRO)

Type: Low Dropout (LDO) Linear Regulator, fixed 1.8 V output

Description: 1.6–5.5 V input, 300 mA low-power, low-noise LDO regulator with 190 mV (typ) dropout at 300 mA (VOUT = 3.0 V), 30 μA (typ) supply current and automatic output discharge, in an XTDFN-1×1-4L package.

Operating Conditions:

  • Supply voltage: 1.6–5.5 V
  • Operating junction temperature: -40 to +125 °C
  • Enable input voltage: 0–5.5 V
  • Output effective capacitance: 0.5 μF to 10 μF; input effective capacitance: 0.5 μF (min)

Absolute Maximum Ratings:

  • IN, EN to GND: -0.3 V to 6 V
  • OUT, BP/FB to GND: -0.3 V to MIN(VIN + 0.3 V, 6 V)
  • Max junction temperature: +150 °C
  • Storage temperature: -65 to +150 °C
  • Power dissipation (TA = +25 °C), XTDFN-1×1-4L: 0.66 W
  • ESD: HBM 5000 V, CDM 1000 V

Key Specs:

  • Output voltage accuracy (IOUT = 0.1 mA): ±2.5 % at TJ = +25 °C; ±3 % over -40 to +125 °C
  • Dropout voltage (IOUT = 300 mA, 1.8 V ≤ VOUT(NOM) < 2.1 V, TJ = +25 °C): 320 mV typ, 420 mV max
  • Supply pin current (no load, TJ = +25 °C): 30 μA typ, 45 μA max
  • Shutdown supply current (VEN = 0 V): 0.05 μA typ, 1 μA max
  • Output current limit: 350 mA min
  • Short-circuit current (VOUT = 0 V): 380 mA typ
  • Load regulation (IOUT = 0.1 to 300 mA, TJ = +25 °C): 45 mV max
  • EN thresholds: VIH 1.5 V min, VIL 0.4 V max
  • Output discharge resistance: 75 Ω typ
  • Start-up time (COUT = 1 μF, IOUT = 1 mA, VOUT = 1.8 V): 100 μs typ

Features:

  • Enable pin accepts voltages higher than the supply, up to 5.5 V
  • Fixed output 0.75–5.0 V; adjustable version 0.8–5.0 V
  • Current limiting and thermal shutdown protection
  • Logic-controlled shutdown with output automatic discharge
  • Excellent load and line transient response, short start-up time
  • Stable with small case size ceramic capacitors
  • Reference-noise bypass pin (BP) on SOT-23-5/SC70-5 fixed versions

Applications:

  • Modems
  • Cellular telephones
  • PCMCIA cards
  • Palmtop computers
  • Portable electronics

Package:

  • XTDFN-1×1-4L (Tape and Reel, 10000; marking 3T for 1.8 V)
  • Also available in SOT-23-5 and SC70-5 (other ordering numbers)

SGM2036S Features

  • Operating Input Voltage Range: 1.6V to 5.5V
  • Enable Pin Accept Voltages Higher than the Supply Voltage and up to 5.5V
  • Fixed Output from 0.75V to 5.0V
  • Adjustable Output from 0.8V to 5.0V
  • 300mA Output Current
  • Low Supply Pin Current: 30 μA (TYP)
  • Low Dropout Voltage: 190mV (TYP) at 300mA, VOUT = 3.0V
  • Shutdown Supply Current: 0.05μA (TYP)
  • Current Limiting and Thermal Protection
  • Excellent Load and Line Transient Responses
  • Short Start-Up Time
  • With Output Automatic Discharge
  • Stable with Small Case Size Ceramic Capacitors
  • -40 °C to +125 °C Operating Temperature Range
  • Available in Green XTDFN-1×1-4L, SOT-23-5 and SC70-5 Packages

SGM2036S Applications

Modems

Cellular Telephones

PCMCIA Cards

Palmtop Computers

Portable Electronics

SGM2036S Pin Configuration

SGM2036S Electrical Characteristics

(VIN = (VOUT(NOM) + 0.5V) or 2.5V (whichever is greater), VEN = VIN, TJ = -40 °C to +125 °C , typical values are at TJ = +25 °C , unless otherwise noted.)

PARAMETERSYMBOLCONDITIONSCONDITIONSMINTYPMAXUNITS
V INInput Voltage RangeInput Voltage Range1.65.5V
Output Voltage AccuracyV OUTI OUT = 0.1mAT J = +25 °C-2.52.5%
Output Voltage AccuracyV OUTI OUT = 0.1mAT J = -40 °C to +125 °C-33%
Feedback VoltageV FBI OUT = 0.1mA, SGM2036S-ADJT J = +25 °C0.780.80.82V
Feedback VoltageV FBI OUT = 0.1mA, SGM2036S-ADJT J = -40 °C to +125 °C0.7760.824V
FB Pin Leakage CurrentI FBV FB = 0.9VV FB = 0.9V1100nA
FB Pin Leakage CurrentI FBV IN risingV IN rising1.51.6V
Under-Voltage Lockout ThresholdsV UVLOV IN fallingV IN falling1.3 0.040.1
Line RegulationOUT IN OUT V V V ∆ ∆ ×V IN = 1.6V or (V OUT(NOM) + 0.5V) to 5.5V, I OUT = 0.1mA, T J = +25 °CV IN = 1.6V or (V OUT(NOM) + 0.5V) to 5.5V, I OUT = 0.1mA, T J = +25 °C30%/V
Load RegulationΔV OUTI OUT = 0.1mA to 300mA, T J = +25 °CI OUT = 0.1mA to 300mA, T J = +25 °C45mV
Load RegulationΔV OUTOUT = 0.1mA to 300mA, SGM2036S-ADJ, T J = +25 °COUT = 0.1mA to 300mA, SGM2036S-ADJ, T J = +25 °C310mV
Dropout VoltageV DROPV OUT = V OUT(NOM) - 100mV, I OUT = 300mA, T J = +25 °CV OUT(NOM) = 0.8V8801200mV
Dropout VoltageV DROPV OUT = V OUT(NOM) - 100mV, I OUT = 300mA, T J = +25 °CV OUT(NOM) = 0.9V7801100mV
Dropout VoltageV DROPV OUT = V OUT(NOM) - 100mV, I OUT = 300mA, T J = +25 °C1.0V ≤ V OUT(NOM) < 1.1V6901000mV
Dropout VoltageV DROPV OUT = V OUT(NOM) - 100mV, I OUT = 300mA, T J = +25 °C1.1V ≤ V OUT(NOM) < 1.2V640900mV
Dropout VoltageV DROPV OUT = V OUT(NOM) - 100mV, I OUT = 300mA, T J = +25 °C1.2V ≤ V OUT(NOM) < 1.5V560800mV
Dropout VoltageV DROPV OUT = V OUT(NOM) - 100mV, I OUT = 300mA, T J = +25 °C1.5V ≤ V OUT(NOM) < 1.8V390550mV
Dropout VoltageV DROPV OUT = V OUT(NOM) - 100mV, I OUT = 300mA, T J = +25 °C1.8V ≤ V OUT(NOM) < 2.1V320420mV
Dropout VoltageV DROPV OUT = V OUT(NOM) - 100mV, I OUT = 300mA, T J = +25 °C2.1V ≤ V OUT(NOM) < 2.5V260340mV
Dropout VoltageV DROPV OUT = V OUT(NOM) - 100mV, I OUT = 300mA, T J = +25 °C2.5V ≤ V OUT(NOM) < 3.0V215280mV
Dropout VoltageV DROPV OUT = V OUT(NOM) - 100mV, I OUT = 300mA, T J = +25 °C≤ V OUT(NOM) ≤ 5.0V190250mV
Dropout VoltageV DROPV OUT = V OUT(NOM) - 100mV, I OUT = 300mA, T J = +25 °C3.0VmV
Output Current LimitI LIMIT350800mA
Short-Circuit CurrentI SHORTV OUT = 0VV OUT = 0V380mA
Supply Pin CurrentI QNo load, T J = +25 °CNo load, T J = +25 °C3045μA
Shutdown Supply CurrentI SHDNV EN = 0VV EN = 0V0.051μA
EN Input ThresholdsV IH1.5V
EN Input ThresholdsV ILV IN = 1.6V to 5.5VV IN = 1.6V to 5.5V0.4V
EN Input Bias CurrentI BHV EN = 5.5VV EN = 5.5V0.81.5μA
EN Input Bias CurrentI BLV EN = 0VV EN = 0V0.011
Output Discharge ResistanceR DISV EN = 0V, V IN = 4V, V OUT = 0.3VV EN = 0V, V IN = 4V, V OUT = 0.3V75Ω
Start-Up Timet STRC OUT = 1μF, I OUT = 1mA, V OUT(NOM) = 1.8V, from assertion of V to V = 90% × VOUT(NOM)100μs
Power Supply Rejection RatioPSRRC BP = 0nF, C OUT = 1μF, I OUT = 30mA, f = 217HzC BP = 0nF, C OUT = 1μF, I OUT = 30mA, f = 217Hz82dB
Power Supply Rejection RatioPSRRV IN = 2.8V, V OUT(NOM) = 1.8V, ∆ V = 0.2V f = 1kHzV IN = 2.8V, V OUT(NOM) = 1.8V, ∆ V = 0.2V f = 1kHz76dB
Power Supply Rejection RatioPSRRRIPPLE P-PRIPPLE P-PdB
Power Supply Rejection RatioPSRRC BP = 10nF, C OUT = 1μF, I OUT = 30mA, f = 217HzC BP = 10nF, C OUT = 1μF, I OUT = 30mA, f = 217Hz92dB
Power Supply Rejection RatioPSRRV IN = 2.8V, V OUT(NOM) = 1.8V, ∆ V = 0.2V f = 1kHzV IN = 2.8V, V OUT(NOM) = 1.8V, ∆ V = 0.2V f = 1kHz86dB
Output Voltage Noisee nC BP = 0nF, C OUT = 1μF, V OUT(NOM) = 1.8V, I OUT = 0mAC BP = 0nF, C OUT = 1μF, V OUT(NOM) = 1.8V, I OUT = 0mA18μV RMS
Output Voltage Noisee nf = 10Hz to 100kHz I OUT = 30mAf = 10Hz to 100kHz I OUT = 30mA100μV RMS
Output Voltage Noisee nC BP = 10nF, C OUT = 1μF, V OUT(NOM) = 1.8V, I OUT = 0mAC BP = 10nF, C OUT = 1μF, V OUT(NOM) = 1.8V, I OUT = 0mA13μV RMS
Output Voltage Noisee nf = 10Hz to 100kHz I OUT = 30mAf = 10Hz to 100kHz I OUT = 30mA60μV RMS
Thermal Shutdown TemperatureT SHDN160°C
Thermal Shutdown HysteresisΔT SHDN20°C

SGM2036S Absolute Maximum Ratings

IN, EN to GND.....................................................-0.3V to 6V
OUT, BP/FB to GND...............-0.3V to MIN((VIN + 0.3V), 6V)
Power Dissipation, P D @T A = +25 °C XTDFN-1×1-4L ............................................................0.66W
SOT-23-5.......................................................................0.7W
SC70-5.........................................................................0.66W
Package Thermal Resistance
XTDFN-1×1- 4L, θ JA ...............................................187.3 °C /W
XTDFN-1×1- 4L, θ JB ...............................................133.2 °C /W
XTDFN-1×1- 4L, θ JC ..............................................150.7 °C /W
XTDFN-1×1- 4L, θ JC(BOT) ........................................120.1 °C /W
SOT-23- 5, θ JA....................................................... 178.2 °C /W
SOT-23- 5, θ JB......................................................... 92.6 °C /W
SOT-23- 5, θ JC ..........................................................125 °C /W
SC70- 5, θ JA ..............................................................188 °C /W
SC70- 5, θ JB .............................................................55.4 °C /W
SC70- 5, θ JC ...........................................................103.2 °C /W
Junction Temperature.................................................+150 °C
Storage Temperature Range.........................-65°C to +150 °C
Lead Temperature (Soldering, 10s)............................+260 °C
ESD Susceptibility
HBM.............................................................................5000V
CDM............................................................................1000V
Operating Input Voltage Range ..........................1.6Vto 5.5V
Enable Input Voltage Range..................................0Vto 5.5V
Input Effective Capacitance, C IN .........................0.5 μF (MIN)
Output Effective Capacitance, C OUT .................0.5μF to 10μF
Operating Junction Temperature Range.......-40 °Cto +125 °C

SGM2036S Thermal Information

When the die temperature exceeds the threshold value of thermal shutdown, the SGM2036S will be in shutdown state and it will remain in this state until the die temperature decreases to +140 °C .

SGM2036S Typical Application

Figure 4. Fixed Output Version (XTDFN-1×1-4L)

Figure 5. Fixed Output Version (SOT-23-5/SC70-5)

Figure 6. Adjustable Output Version (SOT-23-5/SC70-5)

SGM2036S Package Information

Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Ask your AI agent about the SGM2036S

Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.

claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp

Then ask: "Can the SGM2036S run from my 12 V rail? Check it against the datasheet limits."

Create a free account $2 of usage every month, no card needed.