RC0603JR-072K7L
General Purpose Chip ResistorThe RC0603JR-072K7L is a general purpose chip resistor from YAGEO. View the full RC0603JR-072K7L datasheet below including key specifications, electrical characteristics.
Official RC0603JR-072K7L datasheet (PDF) — the source this page was extracted from.
RC0603JR-072K7L Key Specifications
| Parameter | Value |
|---|---|
| Composition | Thick Film |
| Features | Moisture Resistant |
| Height - Seated (Max) | 0.022\" (0.55mm) |
| Number of Terminations | 2 |
| Operating Temperature | -55°C ~ 155°C |
| Package / Case | 0603 (1608 Metric) |
| Power Rating | 0.1W, 1/10W |
| Resistance | 2.7 kOhms Ω |
| Size / Dimension | 0.063\" L x 0.031\" W (1.60mm x 0.80mm) |
| Supplier Device Package | 0603 |
| Temperature Coefficient | ±100ppm/°C |
| Tolerance | ±5% |
RC0603JR-072K7L Overview
Part: RC0603JR-072K7L
Type: Thick Film Chip Resistor
Description: 0603-size, 2.7 kΩ thick film chip resistor with ±5% tolerance and 1/10 W power rating.
Operating Conditions:
- Supply voltage: not applicable
- Operating temperature: -55 °C to +155 °C
- Rated power: 1/10 W at 70 °C
Key Specs:
- Resistance: 2.7 kΩ
- Tolerance: ±5%
- Power rating: 1/10 W (standard)
- Maximum working voltage: 75 V
- Maximum overload voltage: 150 V
- Dielectric withstanding voltage: 150 V
- Temperature coefficient of resistance (T.C.R.): ±100 ppm/°C (10 Ω < R ≤ 10 MΩ)
Features:
- Halogen Free Epoxy
- RoHS compliant with lead-free terminations
- High component and equipment reliability
- Moisture Sensitivity Level: MSL 1
Applications:
- All general purpose applications
Package:
- 0603 SMD chip resistor (1.60 mm × 0.80 mm × 0.45 mm)
RC0603JR-072K7L Features
- Halogen Free Epoxy
- RoHS compliant
- Products with lead free terminations meet RoHS requirements
- Pb-glass contained in electrodes, resistors element and glass are exempted by RoHS
Reducing environmentally
hazardous wastes
- High component and equipment reliability
- Saving of PCB space
- None forbidden-materials used in products/production
- MSL class: MSL 1
SERIES
0075 to 2512
RC0603JR-072K7L Electrical Characteristics
| Table 2 | ||||||||
|---|---|---|---|---|---|---|---|---|
| CHARAC- TERISTICS | POWER | OPERATING TEMPERATURE RANGE | MAXIMUM WORKING VOLTAGE | MAXIMUM OVERLOAD VOLTAGE | DIELECTRIC WITHSTANDING VOLTAGE | RESISTANCE RANGE | TEMPERATURE COEFFICIENT | JUMPER CRITERIA |
| Fig. 4 Chip RC0075 | resistor outlines 1/50W | -55 °C to 125 °C | 10V | 25V | 25V | 5% (E24) 10 Ω ≦ R ≦ 1M Ω 1% (E24/E96) 10 Ω ≦ R ≦ 1M Ω Jumper<50m Ω | 10 Ω ≦ R<100 Ω -200~+600ppm°C 100 Ω ≦ R ≦ 1M Ω ±200ppm°C | Rated Current 0.5A Maximum Current 1.0A |
| RC0100 | 1/32W | -55 °C to 125 °C | 15V | 30V | 30V | 5% (E24) 1 Ω ≦ R ≦ 22M Ω 1% (E24/E96) 1 Ω ≦ R ≦ 10M Ω 0.5% (E24/E96) 33 Ω ≦ R ≦ 470K Ω Jumper<50m Ω | 1 Ω ≦ R<10 Ω -200~+600ppm°C 10 Ω ≤ R < 100 Ω : ±300ppm/°C 100 Ω ≤ R ≤ 10M Ω : ±200ppm/°C 10M Ω < R ≤ 22M Ω : ±250ppm/°C | Rated Current 0.5A Maximum Current 1.0A |
0075 to 2512
Rated Current
Rated Current RC_L
0075 to 2512
| CHARAC- TERISTICS | POWER | OPERATING TEMPERATURE RANGE | MAXIMUM WORKING VOLTAGE | MAXIMUM OVERLOAD VOLTAGE | DIELECTRIC WITHSTANDING VOLTAGE | RESISTANCE RANGE | TEMPERATURE COEFFICIENT | JUMPER CRITERIA |
|---|---|---|---|---|---|---|---|---|
| RC0201 | 1/20W | -55 °C to 125 °C | 25V | 50V | 50V | 5% (E24) 1 Ω ≦ R ≦ 100M Ω 1% (E24/E96) 1 Ω ≦ R ≦ 10M Ω 0.5% (E24/E96) 1 Ω ≦ R ≦ 1M Ω 0.1% (E24/E96) 10 Ω ≦ R ≦ 1M Ω | 1 Ω ≦ R ≦ 10 Ω -100~+350ppm°C 10 Ω <R ≦ 100M Ω ±200ppm°C | Rated Current 0.5A Maximum Current 1.0A |
| RC0402 | 1/16W | -55 °C to 155 °C | 50V | 100V | 100V | 5% (E24) 1 Ω ≦ R ≦ 100M Ω 1% (E24/E96) 1 Ω ≦ R ≦ 10M Ω 0.5% (E24/E96) 1 Ω ≦ R ≦ 1M Ω 0.1% (E24/E96) | 1 Ω ≦ R ≦ 10 Ω ±200ppm°C 10 Ω <R ≦ 10M Ω ±100ppm°C 10M Ω <R ≦ 100M Ω ±200ppm°C | Rated Current 1.0A Maximum Current 2.0A |
| 1/8W | -55 °C to 155 °C | 50V | 100V | 100V | 5% (E24) 1 Ω ≦ R ≦ 1M Ω 1% (E24/E96) Ω ≦ ≦ Ω | 1 Ω ≦ R ≦ 1M Ω ±200ppm°C | ||
| RC0603 | 1/10W | -55 °C to 155 °C | 75V | 150V | 150V | 5% (E24) 1 Ω ≦ R ≦ 22M Ω 1% (E24/E96) 1 Ω ≦ R ≦ 10M Ω 0.5% (E24/E96) 1 Ω ≦ R ≦ 1M Ω 0.1% (E24/E96) 10 Ω ≦ R ≦ 1M Ω | 1 Ω ≦ R ≦ 10 Ω ±200ppm°C 10 Ω <R ≦ 10M Ω ±100ppm°C 10M Ω <R ≦ 22M Ω ±200ppm°C | Rated Current 1.0A Maximum Current 2.0A |
| 1/5W | -55 °C to 155 °C | 75V | 150V | 150V | 5% (E24) 1 Ω ≦ R ≦ 1M Ω 1% (E24/E96) 1 Ω ≦ R ≦ 1M Ω | 1 Ω ≦ R ≦ 1M Ω ±200ppm°C | ||
| 1/8W | -55 °C to 155 °C | 150V | 300V | 300V | 5% (E24) 1 Ω ≦ R ≦ 100M Ω 1% (E24/E96) 1 Ω ≦ R ≦ 10M Ω 0.5% (E24/E96) 1 Ω ≦ R ≦ 1M Ω 0.1% (E24/E96) 10 Ω ≦ R ≦ 1M Ω 10%, 20% (E24) 24M Ω ≦ R ≦ 100M Ω Jumper<50m Ω | 1 Ω ≦ R ≦ 10 Ω ±200ppm°C 10 Ω <R ≦ 10M Ω ±100ppm°C 10M Ω <R ≦ 22M Ω ±200ppm°C 24M Ω <R ≦ 100M Ω ±300ppm°C | Rated Current 2.0A Maximum Current 5.0A | |
| RC0805 | 300V | 5% 1 Ω ≦ R ≦ 1M | 1 Ω ≦ R ≦ 1M Ω ±200ppm °C | |||||
| 1/4W | -55 °C to 155 °C | 150V | 300V | (E24) Ω 1% (E24/E96) |
Rated Current
Rated Current
Rated Current
Rated Current
Variants on the same datasheet
These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.
| Part Number | Manufacturer | Package |
|---|---|---|
| RC0603JR-070RL | Yageo Group | 0603 |
Other Resistors
- FBF05FTPR100 – Prosperity Dielectrics, Current Sense Chip Resistor
- 0603WAF1001T5E – Royalohm, Thick Film Chip Resistor
- 0603WAF1332T5E – Royalohm, Thick Film Chip Resistor
- 0603WAF1803T5E – Royalohm, Thick Film Chip Resistor
- 0603WAF2001T5E – Royalohm, Thick Film Chip Resistor
- 0603WAF2492T5E – Royalohm, Thick Film Chip Resistor
- 0603WAF2701T5E – Royalohm, Thick Film Chip Resistor
- 0603WAF3300T5E – Royalohm, Thick Film Chip Resistor
Ask your AI agent about the RC0603JR-072K7L
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the RC0603JR-072K7L run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.