PZ254V-11-XX
2.54mm Pin Header ConnectorThe PZ254V-11-XX is a 2.54mm pin header connector. View the full PZ254V-11-XX datasheet below including key specifications.
Official PZ254V-11-XX datasheet (PDF) — the source this page was extracted from.
Category
Pin HeadersPZ254V-11-XX Key Specifications
| Parameter | Value |
|---|---|
| Pitch | 2.54mm |
| Current Rating | 3.0A AC/DC |
| Voltage Rating | 250V AC/DC |
| Contact Plating | Au or Sn plated on Nickel overall |
| Contact Material | Brass |
| Contact Resistance | 20mΩ Max. |
| Insulator Material | Polyester, UL94V-0 |
| Insulation Resistance | 1000MΩ Min |
| Operating Temperature | -40°C to +105°C |
| Dielectric Withstand Voltage | 500V AC/minute |
PZ254V-11-XX Overview
Part: PZ254V-11-XX
Type: 2.54 mm Pin Header Connector
Description: 2.54 mm pitch pin header connector rated 250 V AC/DC and 3.0 A AC/DC, with brass contacts and a UL94V-0 polyester insulator, for operation from -40 to +105 °C.
Operating Conditions:
- Supply voltage: not applicable
- Operating temperature: -40 to +105 °C
- Voltage rating: 250 V AC/DC
- Current rating: 3.0 A AC/DC
Absolute Maximum Ratings:
- Max supply voltage: 250 V AC/DC (voltage rating)
- Max continuous current: 3.0 A AC/DC
Key Specs:
- Pitch: 2.54 mm
- Voltage rating: 250 V AC/DC
- Current rating: 3.0 A AC/DC
- Dielectric withstand voltage: 500 V AC/minute
- Contact resistance: 20 MΩ max
- Insulation resistance: 1000 MΩ min
- Operating temperature: -40 °C to +105 °C
Features:
- Insulator material: polyester, UL94V-0
- Contact material: brass
- Contact plating: Au or Sn over nickel
Applications:
- Board-to-board and wire-to-board connections
Package:
- Pin header, 2.54 mm pitch (number of positions set by the -XX suffix)
Other Pin Headers
- PZ254V – XFCN, 2.54mm Pin Header Connector
- PZ254V-11-02P – XFCN, Pin Header Connector
- PZ254V-12-16P – XFCN, 2.54mm Pin Header Connector
- TSW-102-07-G-S – Samtec Inc., Through-Hole Header
- TSW-112-07-G-T – Samtec Inc., Through-Hole Header
Ask your AI agent about the PZ254V-11-XX
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the PZ254V-11-XX run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.