PZ254V-11-03P

The PZ254V-11-03P is an electronic component. View the full PZ254V-11-03P datasheet below including key specifications.

PZ254V-11-03P shares its datasheet with PZ254V-11-02P, whose page lists every part number it covers.

Official PZ254V-11-03P datasheet (PDF) — the source this page was extracted from.

Package

插件,P=2.54mm

PZ254V-11-03P Key Specifications

Parameter	Value
Voltage rating	250 V AC/DC
Current rating	3.0 A AC/DC
Dielectric withstand voltage	500 V AC/minute
Contact resistance	20 mΩ max (listed as "Contact Voltage: 20MΩ Max." in the source)
Insulation resistance	1000 MΩ min
Operating temperature	-40 °C to +105 °C
Pitch	2.54 mm

PZ254V-11-03P Overview

Part: PZ254V-11-02P

Type: 2.54 mm Pin Header Connector

Description: 2.54 mm pitch pin header connector (2-position) rated 250 V AC/DC and 3.0 A AC/DC, with an operating temperature of -40 to +105 °C.

Operating Conditions:

Supply voltage: not applicable
Operating temperature: -40 to +105 °C
Voltage rating: 250 V AC/DC
Current rating: 3.0 A AC/DC

Absolute Maximum Ratings:

Max continuous current: 3.0 A AC/DC (current rating)

Key Specs:

Voltage rating: 250 V AC/DC
Current rating: 3.0 A AC/DC
Dielectric withstand voltage: 500 V AC/minute
Contact resistance: 20 mΩ max (listed as "Contact Voltage: 20MΩ Max." in the source)
Insulation resistance: 1000 MΩ min
Operating temperature: -40 °C to +105 °C
Pitch: 2.54 mm

Features:

Insulator material: polyester, UL94V-0
Contact material: brass
Contact plating: Au or Sn over nickel

Applications:

Board-to-board and wire-to-board interconnects

Package:

2.54 mm pin header, 2 positions (PZ254V-11-02P)

Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Ask your AI agent about the PZ254V-11-03P

Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.

claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp

Then ask: "Can the PZ254V-11-03P run from my 12 V rail? Check it against the datasheet limits."

Create a free account $2 of usage every month, no card needed.