NJM2762V

2-Channel Audio Limiter IC

The NJM2762V is a 2-channel audio limiter ic from Nisshinbo Micro Devices Inc.. View the full NJM2762V datasheet below including key specifications, electrical characteristics, absolute maximum ratings.

NJM2762V shares its datasheet with NJM2762V-TE2, whose page lists every part number it covers.

Official NJM2762V datasheet (PDF) — the source this page was extracted from.

Manufacturer

Nisshinbo Micro Devices Inc.

NJM2762V Key Specifications

Parameter	Value
THD+N	1% max
Channels	2
Cross Talk	-70dB max
Output Noise	-100dBV typ, -90dBV max (A-weighting)
Ripple Rejection	-70dBV max
Operating Current	2.5mA typ, 3mA max (no signal, V+=5V)
Operating Voltage	2.7V to 13.0V
Power Dissipation	300mW (SSOP14)
Reference Voltage	2.5V typ (2.2V to 2.8V)
Storage Temperature	-40°C to +125°C
Operating Temperature	-40°C to +85°C
Maximum Supply Voltage	14V
Control Input Low Level	0V to 0.5V (limiter ON)
Control Input High Level	2V to V+ (limiter OFF)
Limit Level (Rsense=8kΩ)	180mVrms typ (130 to 230mVrms)
Limit Level (Rsense=40kΩ, V+=13V)	1.0Vrms typ

NJM2762V Overview

Part: NJM2762 — Nisshinbo Micro Devices

Type: 2-Channel Audio Limiter

Description: Dual-channel audio limiter IC operating from 2.7 V to 13 V with adjustable limit levels from 180 mVrms to 1 Vrms for speaker protection.

Operating Conditions:

Supply voltage: 2.7 to 13 V
Operating temperature: -40 to +85 °C

Absolute Maximum Ratings:

Max supply voltage: +14 V
Max junction/storage temperature: -40 to +125 °C (Storage Temperature Range)

Key Specs:

Operating current: 2.5 mA typ, 3 mA max (V+ = 5 V, no signal, SW = 0)
Reference voltage: 2.2 V min, 2.5 V typ, 2.8 V max (V+ = 5 V, no signal)
Limit level 1: 180 mVrms typ (130 to 230 mVrms, V+ = 5 V, VIN = 1 Vrms, RL = 10 kΩ, f = 1 kHz, Rsense = 8 kΩ)
Limit level 2: 1.0 Vrms typ (0.7 to 1.3 Vrms, V+ = 13 V, VIN = 2 Vrms, Rsense = 40 kΩ)
Output noise: -100 dBV (10 μVrms) typ, -90 dBV (31.6 μVrms) max (RS = 0 Ω, A-weighting)
Total harmonic distortion: 1% max (VIN = 1 Vrms, RL = 10 kΩ, f = 1 kHz, Rsense = 8 kΩ)
Crosstalk: -70 dB max (f = 1 kHz, BW = 400 Hz to 30 kHz)
Ripple rejection: -70 dBV max (Vripple = 100 mVrms)

Features:

Wide operating voltage (2.7 V to 13.0 V)
Variable limit level via external resistor
Balanced attenuation sensing both channels independently
Low output noise
Limiter ON/OFF control terminal

Applications:

PC audio applications
Audio products requiring speaker protection

Package:

MSOP10 (TVSP10)
SSOP14

NJM2762V Features

Wide Operating Voltage
Variable Limit Level by external resistor
Low Output Noise
Bipolar Technology
Package Outline

NJM2762V Pin Configuration

No.	Symbol	Function
1	V+	Power Supply Terminal
2	OUTa	Ach Output Terminal
3	INa	Ach Input Terminal
4	INT	Smoothing Capacitor Terminal
5	VREF	Reference Voltage Terminal
6	SENSE	Preset Limit Level Terminal
7	SW	Limiter On/Off Control Terminal
8	INb	Bch Output Terminal
9	OUTb	Bch Input Terminal
10	GND	Ground

NJM2762V Electrical Characteristics

POWER SUPPLY (Ta=25 C, V + =5V, SW=0 unless otherwise specified)

PARAMETER	SYMBOL	TEST CONDITION	MIN.	TYP.	MAX.	UNIT
Operating Voltage	V +		2.7	5	13	V
Operating Current	I CC	No signal	-	2.5	3	mA
Reference Voltage	V ref	No signal	2.2	2.5	2.8	V

NJM2762V Absolute Maximum Ratings

PARAMETER	SYMBOL	RATING	UNIT
Supply Voltage	V +	+14	V
Power Dissipation	P D	320 [MSOP10(TVSP10)] 300 [SSOP14]	mW
Maximum Input Voltage	V IMAX	0 ~ V + (Note1)	V
Operating Temperature Range	Topr	-40 ~ +85	C
Storage Temperature Range	Tstg	-40 ~ +125	C

(Note1) Don't put Input Voltage more than Power Supply Voltage.

NJM2762V Typical Application

RSENSE Setting => See graph on page 9

SSOP14

NJM2762V Package Information

NJM2762RB2 MSOP10 (TVSP10)

2.7V to 13.0V 180mVrms to 1Vrms -90dBV max.

MSOP10 (TVSP10)* SSOP14 *MEET JEDEC MO-187-DA / THIN TYPE

NJM2762V (SSOP14)

Variants on the same datasheet

These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.

Part Number	Manufacturer	Package
NJM2762	Nisshinbo Micro Devices Inc.	—
NJM2762RB2	Nisshinbo Micro Devices Inc.	MSOP10 (TVSP10)
NJM2762RB2-TE2	Nisshinbo	MSOP-10
NJM2762V-TE2	Nisshinbo Micro Devices Inc.	SSOP-14
NJM2762V(TE2)	Nisshinbo	SSOP-14

More datasheets

All Nisshinbo Micro Devices datasheets (4)

Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Ask your AI agent about the NJM2762V

Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.

claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp

Then ask: "Can the NJM2762V run from my 12 V rail? Check it against the datasheet limits."

Create a free account $2 of usage every month, no card needed.