NEO-M9N-00B

Part: NEO-M9N-00B — u-blox

Type: Standard precision multi-constellation GNSS module

Description: Concurrent 4-GNSS (GPS, GLONASS, Galileo, BeiDou) receiver module with 2.0 m CEP position accuracy, up to 25 Hz navigation rate, and 2.7–3.6 V supply in a 12.2 x 16.0 mm LCC package.

Operating Conditions:

• Supply voltage (VCC): 2.7–3.6 V (typ. 3.0 V)
• Operating temperature: -40 to +85 °C
• Backup battery voltage (V_BCKP): 1.65–3.6 V
• USB supply voltage (V_USB): 3.0–3.6 V

Absolute Maximum Ratings:

• Max supply voltage (VCC): 3.6 V
• Max backup battery voltage (V_BCKP): 3.6 V
• Max VCC_RF output current: 200 mA
• Max input power at RF_IN: 13 dBm (50 Ω source, continuous wave)
• Storage temperature: -40 to +85 °C

Key Specs:

• Position accuracy (PVT): 2.0 m CEP (GPS, and multi-GNSS modes)
• Tracking sensitivity: -167 dBm (GPS+GLO+GAL+BDS)
• Cold start: 24 s (GPS+GLO+GAL+BDS); hot start: 2 s
• Max navigation update rate: 25 Hz (PVT)
• Time pulse accuracy: 30 ns RMS, 60 ns 99%
• Supply current (VCC = 3.0 V, 1 Hz, GPS+GLO+GAL+BDS): 50 mA acquisition, 36 mA continuous tracking, 21 mA power save tracking; 100 mA peak
• Backup current: 45 μA (V_BCKP = 3 V, VCC = 0 V)
• Receiver chain noise figure: 3.5 dB typ. (GPS only); max external gain at RF_IN: 30 dB
• Operational limits: ≤ 4 g, 80,000 m, 500 m/s

Features:

• u-blox M9 standard precision GNSS platform with concurrent reception of up to four GNSS plus SBAS and QZSS
• Jamming and spoofing detection and reporting; active GNSS in-band filtering (fixed or adaptive)
• AssistNow Online, Offline and Autonomous A-GNSS support
• Interfaces: UART (4800–921600 bit/s), SPI, I2C, USB
• Protocols: UBX, NMEA 4.10 (default, also 4.0/2.3/2.1), RTCM 3.3 input
• Security: secure boot, SHA-256 signed messages, configuration lockdown
• Hardware and software backup modes, power save modes
• Data logger, odometer, geofencing (up to 4 circular areas), data batching up to 5 min
• Upgradeable firmware in flash

Applications:

• Automotive and industrial tracking
• Navigation
• Telematics
• UAVs

Package:

• NEO form factor LCC, 24 pins, 12.2 x 16.0 mm

The pin assignment of the NEO-M9N-00B module is shown in Figure 2. The defined configuration of the PIOs is listed in Table 9.

For detailed information on pin functions and characteristics, see the integration manual [3].

Figure 2: NEO-M9N-00B pin assignment

Figure 2: NEO-M9N-00B pin assignment

Table 9: NEO-M9N-00B pin assignment

• For detailed information on the pin functions and characteristics see the integration manual [3].

Table 9: NEO-M9N-00B pin assignment

Table 10: Absolute maximum ratings

CAUTION Risk of equipment damage. This product is not protected against overvoltage or reversed voltages. Use appropriate protection diodes to avoid voltage spikes exceeding the specified boundaries damaging the equipment.