Part: Nationstar NCD0603R6

Type: Chip LED

Description: A red-emitting Chip LED with AlGaInP material, featuring high luminous intensity, low power dissipation, and long lifespan, designed for surface-mounted electronic equipment applications such as signal indication and lighting.

Operating Conditions:

• Forward voltage range: 1.6–2.4 V (at I_F=5mA)
• Operating temperature: -30 to +85 °C
• Test current: 5 mA

Absolute Maximum Ratings:

• Max forward current: 25 mA
• Max pulse forward current: 50 mA (Pulse Width ≤ 0.1ms, Duty ≤ 1/10)
• Max reverse voltage: 5 V
• Max power dissipation: 65 mW
• Max storage temperature: 100 °C

Key Specs:

• Forward Voltage (V_F): 1.6 V (Min), 2.0 V (Typ), 2.4 V (Max) at I_F=5mA
• Reverse Current (I_R): 10 μA (Max) at V_R=5V
• Peak Wavelength (λ_P): 630 nm (Typ) at I_F=5mA
• Dominant Wavelength (λ_d): 620 nm (Min), 622 nm (Typ), 630 nm (Max) at I_F=5mA
• Luminous Intensity (I_V): 30 mcd (Min), 45 mcd (Typ), 80 mcd (Max) at I_F=5mA
• View Angle (2θ_1/2): 140 deg (Typ)
• Spectrum Radiation Bandwidth (Δλ): 15 nm (Typ) at I_F=5mA

Features:

• AlGaInP chip material
• Red emitting color
• Epoxy resin encapsulation
• Pb-Free reflow soldering compatible
• High Luminous Intensity
• Low Power Dissipation
• Good Reliability and Long Lifespan
• Complied With RoHS Directive

Applications:

• Signal indication and luminance for surface mounted electronic equipment
• Household appliance switch indicator lights
• Mobile phone keyboard lights
• Automotive dashboard indicator lights

Package:

• Chip LED (1.6mm x 0.8mm x 0.6mm)

管芯材料:

AlGaInP

发光颜色:红色

Material:

Emitting Color: Red

封装材料:环氧树脂

Encapsulation: Epoxy Resin

焊接方法:无铅回流焊

Soldering methods: Pb-Free reflow soldering

光强高,功耗低,可靠性好,寿命长

High Luminous Intensity ,Low Power Dissipation, Good Reliability and Long Lifespan

• 符合欧盟公布的 RoHS 指令要求

Complied With RoHS Directive

• 产品规格如因工艺改进而有所改变,恕不另行通知。

• The specifications of the product may be modified for improvement without notice.

NCD0603R6 Pinout

Package: SMD 0603 (1.6 mm × 0.8 mm × 0.6 mm) — 2-pin LED

Notes

• Component Type: Chip LED (Light Emitting Diode), red color (AlGaInP material)
• Polarity: Pin ① is the cathode (negative, marked on package); Pin ② is the anode (positive)
• Absolute Maximum Ratings: Forward current 25 mA (50 mA pulse), reverse voltage 5 V, operating temperature −30 to +85 °C
• Typical Operating Conditions (at 25 °C, IF = 5 mA): Forward voltage 2.0 V (typ.), luminous intensity 45 mcd (typ.), dominant wavelength 622 nm (typ.)
• Soldering: Pb-free reflow soldering recommended; maximum solder temperature 260 °C for 10 seconds