MX25L6405DM2I-12G
The MX25L6405DM2I-12G is an electronic component. View the full MX25L6405DM2I-12G datasheet below including electrical characteristics, absolute maximum ratings.
Overview
Part: MX25L6406E — Macronix
Type: 64M-bit CMOS Serial Flash Memory
Description: A 64M-bit (8 MB) serial flash memory supporting SPI Mode 0 and Mode 3, with a 2.7 to 3.6 V supply, 86 MHz serial clock, and features like block lock protection and a 512-bit secured OTP.
Operating Conditions:
- Supply voltage: 2.7 to 3.6 V
- Serial clock speed: 86 MHz (max)
- Dual Output mode serial clock speed: 80 MHz (max)
Absolute Maximum Ratings:
Key Specs:
- Memory Size: 64 M-bit (67,108,864 x 1 bit or 33,554,432 x 2 bits)
- Sector Size: 4 KB (2048 equal sectors)
- Block Size: 64 KB (128 equal blocks)
- Page Program Time: 0.6 ms (typ.), 3 ms (max.)
- Sector Erase Time: 40 ms (typ.)
- Block Erase Time: 0.4 s (typ.)
- Active Read Current: 25 mA (max.) at 86 MHz
- Standby Current: 12 μA (typ.)
- Deep Power-down Current: 2 μA (typ.)
- Erase/Program Cycles: 100,000 (typ.)
- Data Retention: 20 years
Features:
- Single Power Supply Operation (2.7 to 3.6 V)
- Supports Serial Peripheral Interface (Mode 0 and Mode 3)
- Byte and Page (256 bytes) Program Capability
- Sector, Block, and Chip Erase Capability
- Latch-up protected to 100mA from -1V to Vcc +1V
- Block lock protection
- Additional 512 bit secured OTP for unique identifier
- Auto Erase and Auto Program Algorithm
- JEDEC 1-byte manufacturer ID and 2-byte device ID
- Support Serial Flash Discoverable Parameters (SFDP) mode
Applications:
Package:
- 16-pin SOP (300mil)
- 8-pin SOP (200mil)
- 8-pin VSOP (200mil)
- 8-land WSON (8x6mm)
- 8-land WSON (6x5mm)
- 24-ball TFBGA (6x8mm, 4x6 ball array)
- 24-ball TFBGA (6x8mm, 5x5 ball array)
Features
- Input Data Format
- 1-byte Command code
- Advanced Security Features
- Block lock protection
The BP3~BP0 status bit defines the size of the area to be software protection against program and erase instruc -tions
- Additional 512 bit secured OTP for unique identifier
- Auto Erase and Auto Program Algorithm
- -Automatically erases and verifies data at selected sector
- -Automatically programs and verifies data at selected page by an internal algorithm that automatically times the program pulse widths (Any page to be programed should have page in the erased state first)
- Status Register Feature
- Electronic Identification
- JEDEC 1-byte manufacturer ID and 2-byte device ID
Pin Configuration
| SYMBOL | DESCRIPTION |
|---|---|
| CS# | Chip Select |
| SI/SIO0 | Serial Data Input (for 1 x I/O)/ Serial Data Input & Output (for Dual Output mode) |
| SO/SIO1 | Serial Data Output (for 1 x I/O)/ Serial Data Output (for Dual Output mode) |
| SCLK | Clock Input |
| WP# | Write protection |
| HOLD# | Hold, to pause the device without deselecting the device |
| VCC | + 3.3V Power Supply |
| GND | Ground |
Electrical Characteristics
| Symbol | Parameter | Notes | Min. | Typ. | Max. | Units | Test Conditions |
|---|---|---|---|---|---|---|---|
| ILI | Input Load Current | 1 | ± 2 | μA | VCC = VCC Max, VIN = VCC or GND | ||
| ILO | Output Leakage Current | 1 | ± 2 | μA | VCC = VCC Max, VOUT = VCC or GND | ||
| ISB1 | VCC Standby Current | 1 | 12 | 50 | μA | VIN = VCC or GND, CS# = VCC | |
| ISB2 | Deep Power-down Current | 2 | 20 | μA | VIN = VCC or GND, CS# = VCC | ||
| ICC1 | VCC Read | 1 | 25 | mA | f=86MHz fT=80MHz (2 x I/O read) SCLK=0.1VCC/0.9VCC, SO=Open | ||
| ICC1 | VCC Read | 1 | 20 | mA | f=66MHz, SCLK=0.1VCC/0.9VCC, SO=Open | ||
| ICC1 | VCC Read | 1 | 10 | mA | f=33MHz, SCLK=0.1VCC/0.9VCC, SO=Open | ||
| ICC2 | VCC Program Current (PP) | 1 | 15 | 20 | mA | Program in Progress, CS# = VCC | |
| ICC3 | VCC Write Status Register (WRSR) Current | 3 | 20 | mA | Program status register in progress, CS#=VCC | ||
| ICC4 | VCC Sector Erase Current (SE) | 1 | 9 | 20 | mA | Erase in Progress, CS#=VCC | |
| ICC5 | VCC Chip Erase Current (CE) | 1 | 17 | 20 | mA | Erase in Progress, CS#=VCC | |
| VIL | Input Low Voltage | -0.5 | 0.3VCC | V | |||
| VIH | Input High Voltage | 0.7VCC | VCC+0.4 | V | |||
| VOL | Output Low Voltage | 0.2 | V | IOL = 100μA | |||
| VOH | Output High Voltage | VCC-0.2 | V | IOH = -100μA |
Absolute Maximum Ratings
| RATING | VALUE | |
|---|---|---|
| Ambient Operating Temperature | Industrial grade | -40 ° C to 85 ° C |
| Storage Temperature | -65°C to 150°C | |
| Applied Input Voltage | -0.5V to VCC+0.5V | |
| Applied Output Voltage | -0.5V to VCC+0.5V | |
| VCC to Ground Potential | -0.5V to 4.0V |
Package Information
Related Variants
The following components are covered by the same datasheet.
| Part Number | Manufacturer | Package |
|---|---|---|
| MX25L6406E | Macronix | — |
Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.
Get structured datasheet data via API
Get started free