Skip to main content

We use cookies to understand how you use our site and improve your experience. See our Privacy Policy.

MAX17227AANT+T

The MAX17227AANT+T is an electronic component from Analog Devices. View the full MAX17227AANT+T datasheet below including key specifications.

MAX17227AANT+T shares its datasheet with MAX17227AANT+, whose page lists every part number it covers.

Official MAX17227AANT+T datasheet (PDF) — the source this page was extracted from.

Manufacturer

Analog Devices

MAX17227AANT+T Key Specifications

ParameterValue
Input voltage range400 mV to 5.5 V
Peak inductor current2 A
Shutdown input current1 nA
ESD±2500 V HBM on all pins (JEDEC/ESDA JS-001)
Latch-up±250 mA current injection and supply overvoltage (JESD78)
Multi-layer Theta Ja95.15 °C/W (WLP)
Moisture sensitivityJEDEC J-STD-020-C Level 1
Life test (125 °C biased, 192 hrs)0 failures out of 80 samples; failure rate 24.3 FITs (60% confidence, 25 °C)

MAX17227AANT+T Overview

Part: MAX17227AANT+ / MAX17227AANT+T — Maxim Integrated

Type: nanoPower Boost Converter

Description: 400 mV to 5.5 V input, 2 A peak inductor current nanoPower boost converter with short-circuit protection, True Shutdown and 1 nA shutdown current.

Operating Conditions:

  • Supply voltage: 0.4–5.5 V
  • Operating temperature: -40 to +125 °C
  • Control scheme: adjustable on-time pulse-frequency modulation (PFM)

Absolute Maximum Ratings:

  • Max junction/storage temperature: not listed in this reliability report

Key Specs:

  • Input voltage range: 400 mV to 5.5 V
  • Peak inductor current: 2 A
  • Shutdown input current: 1 nA
  • ESD: ±2500 V HBM on all pins (JEDEC/ESDA JS-001)
  • Latch-up: ±250 mA current injection and supply overvoltage (JESD78)
  • Multi-layer Theta Ja: 95.15 °C/W (WLP)
  • Moisture sensitivity: JEDEC J-STD-020-C Level 1
  • Life test (125 °C biased, 192 hrs): 0 failures out of 80 samples; failure rate 24.3 FITs (60% confidence, 25 °C)

Features:

  • Ultra-low quiescent current
  • True Shutdown: output disconnects from the input with no forward or reverse current
  • Startup into a pre-charged output capacitor
  • Cycle-by-cycle inductor current limit
  • Short-circuit and thermal protection
  • Process S18; observed outgoing defect rate < 50 ppm

Applications:

  • Battery-powered applications requiring long battery life and high efficiency at all power levels

Package:

  • 6-bump WLP, 1.58 mm x 0.89 mm (3 x 2, 0.4 mm pitch)
  • 8-pin TDFN, 2 mm x 2 mm

Variants on the same datasheet

These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.

Part NumberManufacturerPackage
MAX17227AANT+Analog Devices—

More datasheets

All Analog Devices datasheets (700)

Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Ask your AI agent about the MAX17227AANT+T

Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.

claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp

Then ask: "Can the MAX17227AANT+T run from my 12 V rail? Check it against the datasheet limits."

Create a free account $2 of usage every month, no card needed.