ISM330DHCX
6-axis IMU (3D accelerometer and 3D gyroscope)The ISM330DHCX is a 6-axis imu (3d accelerometer and 3d gyroscope) from STMicroelectronics. View the full ISM330DHCX datasheet below including key specifications, electrical characteristics, absolute maximum ratings.
Official ISM330DHCX datasheet (PDF) — the source this page was extracted from.
Manufacturer
STMicroelectronicsCategory
6-axis IMU (3D accelerometer and 3D gyroscope)
ISM330DHCX Key Specifications
| Parameter | Value |
|---|---|
| China RoHS | Non-Compliant |
| Height | 860 µm |
| Introduction Date | 2019-07-31 |
| Length | 3 mm |
| Lifecycle Status | Production (Last Updated: 1 month ago) |
| Max Operating Temperature | 105 °C |
| Max Supply Voltage | 3.6 V |
| Min Operating Temperature | -40 °C |
| Min Supply Voltage | 1.71 V |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Number of Terminals | 14 |
| Operating Supply Voltage | 1.8 V |
| Operating Temperature | -40°C ~ 105°C |
| Output Configuration | Digital |
| Output Type | Digital |
| Output Type | I2C, SPI |
| Package / Case | 14-VFLGA Module |
| Packaging | MouseReel |
| REACH SVHC | Unaffected |
| RoHS | Compliant |
| Sensor Type | Accelerometer, Gyroscope, Temperature, 6 Axis |
| Standard Pack Qty | 5000 |
| Supplier Device Package | 14-LGA (2.5x3) |
ISM330DHCX Overview
Part: ISM330DHCX / ISM330DHCXTR — STMicroelectronics
Type: 6-axis IMU (3D accelerometer + 3D gyroscope) with Machine Learning Core
Description: Industrial-grade iNEMO inertial module with a ±2/±4/±8/±16 g accelerometer, a ±125 to ±4000 dps gyroscope, an embedded Machine Learning Core, an FSM, a 9 kB FIFO and SPI/I²C interfaces, supplied from 1.71–3.6 V in a 2.5 x 3.0 x 0.83 mm LGA-14L.
Operating Conditions:
- Supply voltage (Vdd): 1.71–3.6 V
- I/O supply voltage (Vdd_IO): 1.62–3.6 V
- Operating temperature: -40 to +105 °C
Absolute Maximum Ratings:
- Max supply voltage (Vdd): 4.8 V (range -0.3 to 4.8 V)
- Input voltage on any control pin: -0.3 to Vdd_IO + 0.3 V
- Storage temperature: -40 to +125 °C
- Mechanical shock: 20,000 g for 0.2 ms
- ESD (HBM): 2 kV
Key Specs:
- Accelerometer full scale: ±2/±4/±8/±16 g; sensitivity 0.061 to 0.488 mg/LSB
- Gyroscope full scale: ±125/±250/±500/±1000/±2000/±4000 dps; sensitivity 4.375 to 140 mdps/LSB
- Gyroscope rate noise density (high-performance mode, T = 25 °C): 5 mdps/√Hz typ, 8 max
- Accelerometer noise density (high-performance mode): 60 μg/√Hz typ, 100 max
- Gyroscope zero-rate level: ±1 dps typ (±3 max); accelerometer zero-g offset: ±10 mg typ (±65 max)
- Accelerometer ODR: 1.6 Hz (low-power mode only), 12.5 Hz to 6667 Hz; gyroscope ODR: 26 Hz to 6667 Hz
- Current consumption in high-performance mode (gyroscope + accelerometer): 1.2 mA typ at Vdd = 1.8 V, T = 25 °C
- Sensitivity tolerance: ±2% after factory calibration
Features:
- Embedded temperature compensation for high stability
- SPI/I²C serial interface plus an auxiliary SPI for OIS and stabilization data output
- Six-channel synchronized output
- Sensor hub supporting up to 4 external sensors
- Smart FIFO up to 9 kB
- 16 programmable Finite State Machines
- Machine Learning Core running up to 8 flows, with up to 512 nodes
- Embedded functions: tilt, free-fall, wakeup, 6D/4D orientation, click/double-click, pedometer, step detector and counter
- Embedded temperature sensor and self-test for the accelerometer and gyroscope
- High shock survivability
- ECOPACK, RoHS and "Green" compliant
Applications:
- Industrial IoT and connected devices
- Antennas, platforms, and optical image and lens stabilization
- Robotics, drones and industrial automation
- Navigation systems and telematics
- Vibration monitoring and compensation
Package:
- LGA-14L (2.5 x 3.0 x 0.83 mm typ.)
- ISM330DHCX: tray packing
- ISM330DHCXTR: tape & reel packing
ISM330DHCX Features
- 3D accelerometer with selectable full scale: ±2/±4/±8/±16 g
- 3D gyroscope with extended selectable full scale: ±125/±250/±500/±1000/±2000/±4000 dps
- Extended temperature range from -40 to +105 °C
- Embedded compensation for high stability over temperature
- SPI/I²C serial interface
- Auxiliary SPI serial interface for data output of gyroscope and accelerometer (OIS and other stabilization applications)
- Six-channel synchronized output
- Sensor hub feature to efficiently collect data from additional external sensors
- Embedded smart FIFO up to 9 kbytes
- Programmable Finite State Machine to process data from accelerometer, gyroscope, and external sensors
- Machine Learning Core
- Smart embedded functions and interrupts: tilt detection, free-fall, wakeup, 6D/4D orientation, click and double-click
- Embedded pedometer, step detector and counter for healthcare applications
- Analog supply voltage: 1.71 V to 3.6 V
- Embedded temperature sensor
- Embedded self-test both for gyroscope and accelerometer
- High shock survivability
- ECOPACK, RoHS and 'Green' compliant
ISM330DHCX Applications
- Industrial IoT and connected devices
- Antennas, platforms, and optical image and lens stabilization
- Robotics, drones and industrial automation
- Navigation systems and telematics
- Vibration monitoring and compensation
ISM330DHCX Pin Configuration
Figure 4. Pin connections
Direction of detectable angular rate (top view)
ISM330DHCX Electrical Characteristics
@ Vdd = 1.8 V, T = 25 °C, unless otherwise noted.
Table 3. Electrical characteristics
| Symbol | Parameter | Test conditions | Min. (1) | Typ. (2) | Max. (1) | Unit |
|---|---|---|---|---|---|---|
| Vdd | Supply voltage | 1.71 | 1.8 | 3.6 | V | |
| Vdd_IO | Power supply for I/O | 1.62 | 3.6 | V | ||
| IddHP | Gyroscope and accelerometer current consumption in high-performance mode | 1.2 | 1.5 | mA | ||
| IddNM | Gyroscope and accelerometer current consumption in normal mode | ODR = 208 Hz | 0.7 | mA | ||
| LA_IddHP | Accelerometer current consumption in high-performance mode | 360 | 430 | μA | ||
| LA_IddLM | Accelerometer current consumption in low-power mode | ODR = 52 Hz ODR = 12.5 Hz ODR = 1.6 Hz | 32 11 5.5 | μA | ||
| IddPD | Gyroscope and accelerometer current consumption during power-down | 3 | μA | |||
| Ton | Turn-on time | 35 | ms | |||
| V IH | Digital high-level input voltage | 0.7 * Vdd_IO | V | |||
| V IL | Digital low-level input voltage | 0.3 * Vdd_IO | V | |||
| V OH | Digital high-level output voltage | I OH = 4 mA (3) | Vdd_IO - 0.2 | V | ||
| V OL | Digital low-level output voltage | I OL = 4 mA (3) | 0.2 | V | ||
| Top | Operating temperature range | -40 | +105 | °C |
- Typical specifications are not guaranteed.
- 4 mA is the minimum driving capability, i.e. the minimum DC current that can be sourced/sunk by the digital pad in order to guarantee the correct digital output voltage levels V OH and V OL .
ISM330DHCX Absolute Maximum Ratings
Stresses above those listed as 'Absolute maximum ratings' may cause permanent damage to the device. This is a stress rating only and functional operation of the device under these conditions is not implied. Exposure to maximum rating conditions for extended periods may affect device reliability.
Table 7. Absolute maximum ratings
| Symbol | Ratings | Maximum value | Unit |
|---|---|---|---|
| Vdd | Supply voltage | -0.3 to 4.8 | V |
| T STG | Storage temperature range | -40 to +125 | °C |
| Sg | Acceleration g for 0.2 ms | 20,000 | g |
| ESD | Electrostatic discharge protection (HBM) | 2 | kV |
| Vin | Input voltage on any control pin (including CS, SCL/SPC, SDA/SDI/SDO, SDO/SA0) | -0.3 to Vdd_IO +0.3 | V |
Note: Supply voltage on any pin should never exceed 4.8 V.
Table 7. Absolute maximum ratings
This device is sensitive to mechanical shock, improper handling can cause permanent damage to the part.
This device is sensitive to electrostatic discharge (ESD), improper handling can cause permanent damage to the part.
ISM330DHCX Package Information
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark.
Variants on the same datasheet
These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.
| Part Number | Manufacturer | Package |
|---|---|---|
| ISM330DHCXTR | STMicroelectronics | 14-VFLGA Module |
More datasheets
Ask your AI agent about the ISM330DHCX
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the ISM330DHCX run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.