ISL29125IR0Z-T7

Part 1: Markdown Summary

Part: ISL29125 from Intersil

Type: Digital Red, Green and Blue Color Light Sensor with IR Blocking Filter

Key Specs:

• Operating current: 56μA
• Shutdown current: 0.5μA
• Operating power supply (VDD): 2.25V to 3.63V
• I2C power supply: 1.7V to 3.63V
• ADC resolution: 16 bits
• Operating temperature: -40°C to +85°C
• Optical sensitivity Range 0: 5.7m lux to 375 lux
• Optical sensitivity Range 1: 0.152 lux to 10,000 lux
• I2C Clock Rate: 500 kHz (Typ)

Features:

• Low power, high sensitivity
• IR blocking filter
• I2C (SMBus compatible) output
• Accurate RGB spectral response
• Excellent light source to light source variation (LS2LS)
• Rejects 50Hz and 60Hz flicker
• Selectable range to optimize sensitivity
• Hardware and software user programmable interrupt thresholds
• Interrupt persistency feature

Applications:

• Smart phone, PDA, GPS, tablet PCs, LCD-TVs, digital picture frames, digital cameras
• Dynamic display color balancing
• Printer color enhancement
• Industrial/commercial LED lighting color management
• Ambient light color detection/correction
• OLED display aging compensation

Package:

• 6 Ld ODFN: 1.65x1.65x0.7mm

• 56μA operating current, 0.5μA shutdown current
• Selectable range (Via I²C)
• I²C (SMBus compatible) output
• · ADC resolution 16 bits
• · Programmable interrupt windows
• · Two optical sensitivity ranges
  • Range 0 = 5.7m lux to 375 lux
  • Range 1 = 0.152 lux to 10,000 lux
• Operating power supply 2.25 to 3.63V
• I²C power supply 1.7V to 3.63V
• 6 Ld ODFN (1.65x1.65x0.7mm) package

• Smart phone, PDA, GPS, tablet PCs, LCD-TVs, digital picture frames, digital cameras
• · Dynamic display color balancing
• Printer color enhancement
• Industrial/commercial LED lighting color management
• Ambient light color detection/correction
• · OLED display aging compensation

FIGURE 1. TYPICAL APPLICATION DIAGRAM

FIGURE 2. NORMALIZED SPECTRAL RESPONSE FOR RED, GREEN AND BLUE SENSING

• 1. 565nm Green, 620nm Red LED, 485nm Blue in white LED is used in production test. Its irradiance is calibrated to produce the same DATA count against an illuminance level of 130 lux fluorescent light.
• 6. Compliance to datasheet limits is assured by one or more methods: production test, characterization and/or design.
• 1. SDA and INT current sinking capability are assured by design.

• ESD Ratings
• Human Body Model (HBM)2.5kV
• Machine Model (MM) 300V
• Charged Device Model (CDM) 2kV
• Thermal Resistance (Typical)

• 6 Ld ODFN Package (Note 4)
• Maximum Junction Temperature (TJMAX)+90°C
• Storage Temperature Range40°C to +100°C
• Operating Temperature40°C to +85°C
• Pb-Free Reflow Profile see TB493

CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and result in failures not covered by warranty.

NOTE:

4. JA is measured with the component mounted on a high effective thermal conductivity test board in free air. See Tech Brief TB379 for details.

• ESD Ratings
• Human Body Model (HBM)2.5kV
• Machine Model (MM) 300V
• Charged Device Model (CDM) 2kV
• Thermal Resistance (Typical)

• 6 Ld ODFN Package (Note 4)
• Maximum Junction Temperature (TJMAX)+90°C
• Storage Temperature Range40°C to +100°C
• Operating Temperature40°C to +85°C
• Pb-Free Reflow Profile see TB493

CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and result in failures not covered by warranty.

NOTE:

4. JA is measured with the component mounted on a high effective thermal conductivity test board in free air. See Tech Brief TB379 for details.