IRS2104SPBF

Part: IRS2104

Type: Half-Bridge Driver

Description: High voltage, high speed power MOSFET and IGBT driver with dependent high- and low-side referenced output channels, fully operational to +600 V, with 10 V to 20 V gate drive supply range and 130 mA/270 mA output current.

Operating Conditions:

• Supply voltage (VCC): 10–20 V
• Operating temperature: -40 to 125 °C
• High-side floating supply offset voltage (VS): Note 1 to 600 V

Absolute Maximum Ratings:

• Max low-side and logic fixed supply voltage (VCC): 25 V
• Max junction temperature (TJ): 150 °C
• Max storage temperature (TS): -55 to 150 °C

Key Specs:

• Turn-on propagation delay (ton): 680 ns (typ.) at VS = 0 V
• Turn-off propagation delay (toff): 150 ns (typ.) at VS = 600 V
• Deadtime (DT): 520 ns (typ.)
• Output high short circuit pulsed current (IO+): 130 mA (min.)
• Output low short circuit pulsed current (IO-): 270 mA (min.)
• Quiescent VCC supply current (IQCC): 150 μA (typ.)
• High-side floating absolute voltage (V OFFSET): 600 V max.
• Logic '1' input voltage (VIH): 2.5 V (min.) at VCC = 10 V to 20 V

Features:

• Floating channel designed for bootstrap operation
• Tolerant to negative transient voltage, dV/dt immune
• Fully operational to +600 V
• Gate drive supply range from 10 V to 20 V
• 3.3 V, 5 V , and 15 V input logic compatible
• Undervoltage lockout
• Cross-conduction prevention logic
• High -side output in phase with input
• Internally set deadtime
• Shutdown input turns off both channels
• RoHS compliant
• Matched propagation delay for both channels

Applications:

Package:

• 8 Lead PDIP
• 8 Lead SOIC

• Floating channel designed for bootstrap operation
• Tolerant to negative transient voltage, dV/dt immune
• Fully operational to +600 V
• Gate drive supply range from 10 V to 20 V
• 3.3 V, 5 V , and 15 V input logic compatible
• Undervoltage lockout
• Cross-conduction prevention logic
• High -side output in phase with input
• Internally set deadtime
• Shutdown input turns off both channels
• RoHS compliant
• Matched propagation delay for both channels

VBIAS (VCC, VBS) = 15 V, CL = 1000 pF and TA = 25 ° C unless otherwise specified.

Absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters are absolute voltages referenced to COM. The thermal resistance and power dissipation ratings are measured under board mounted and still air conditions.

The i nput/ o utput logic timing diagram is shown in Fig. 1. For proper operation the device should be used within the recommended conditions. The VS offset rating is tested with all supplies biased at a 15 V differential.

Note 1: Logic operational for V S of -5 V to +600 V. Logic state held for V S of -5 V to -V BS . (Please refer to the Design Tip DT97-3 for more details).

2