ICS-43434
Digital I2S MEMS MicrophoneThe ICS-43434 is a digital i2s mems microphone from TDK. View the full ICS-43434 datasheet below including key specifications, pinout.
Official ICS-43434 datasheet (PDF) — the source this page was extracted from.
Manufacturer
TDKCategory
Digital I2S MEMS Microphone
Package
LGA-6 3.50x2.65mm
Lifecycle
NRND (Last Updated: 1 month ago)
ICS-43434 Key Specifications
| Parameter | Value |
|---|---|
| Case/Package | LGA |
| Quiescent Current | 550 µA |
| Direction | Omnidirectional |
| Direction | Omnidirectional |
| Frequency Range | 60 Hz ~ 20 kHz |
| Height | 980 µm |
| Height - Seated (Max) | 980 µm |
| Height (Max) | 0.039" (0.98mm) |
| Introduction Date | 2016-06-03 |
| Length | 3.5 mm |
| Lifecycle Status | NRND (Last Updated: 1 month ago) |
| LTB Date | 2026-06-15 |
| LTD Date | 2027-01-15 |
| Manufacturer Lifecycle Status | PRODUCTION (NOT RECOMMENDED FOR NEW DESIGN) (Last Updated: 1 month ago) |
| Max Length | 3.6 mm |
| Max Operating Temperature | 85 °C |
| Max Supply Voltage | 3.63 V |
| Max Thickness | 1.08 mm |
| Max Width | 2.75 mm |
| Min Length | 3.4 mm |
| Min Operating Temperature | -40 °C |
| Min Supply Voltage | 1.65 V |
| Min Thickness | 880 µm |
| Min Width | 2.55 mm |
| Number of Circuits | 1 |
| Number of Terminals | 6 |
| Operating Supply Current | 550 µA |
| Output Type | Digital |
| Output Type | Digital, I2S |
| Packaging | MouseReel |
| Port Location | Bottom |
| REACH SVHC | Unaffected |
| RoHS | Compliant |
| S/N Ratio | 64dB |
| Schedule B | 8518100000, 8518100000|8518100000|8518100000|8518100000|8518100000 |
| Sensitivity | -26 ±1dB @ 94dB SPL |
| Shape | Rectangular |
| Size / Dimension | 0.138" L x 0.104" W (3.50mm x 2.65mm) |
| Standard Pack Qty | 10000 |
| Termination | Solder Pads |
| Type | MEMS (Silicon) |
| Voltage Range | 1.65 V ~ 3.63 V |
| Width | 2.65 mm |
ICS-43434 Overview
Part: ICS-43434 — TDK InvenSense
Type: Digital I²S MEMS Microphone (bottom port, multi-mode)
Description: 1.65–3.63 V, omnidirectional bottom-port MEMS microphone with 24-bit I²S output, 65 dBA SNR, 120 dB SPL AOP and -26 dB FS ±1 dB sensitivity in a 3.50 × 2.65 × 0.98 mm package.
Operating Conditions:
- Supply voltage: 1.65–3.63 V
- Operating temperature: -40 to +85 °C
- Sampling frequency: 23–51.6 kHz (High-Performance), 6.25–18.75 kHz (Low-Power), ≤3.125 kHz (Sleep)
- SCK period: 303–2500 ns
Absolute Maximum Ratings:
- Supply voltage (VDD): -0.3 V to +3.63 V
- Digital pin input voltage: -0.3 V to VDD + 0.3 V or 3.63 V, whichever is less
- Sound pressure level: 160 dB
- Mechanical shock: 10,000 g
- Biased temperature: -40 to +85 °C
- Storage temperature: -55 to +150 °C
Key Specs:
- Sensitivity: -26 dB FS typ (-27 to -25 dB FS), 1 kHz, 94 dB SPL
- SNR: 65 dBA (High-Performance), 64 dBA (Low-Power), 20 kHz bandwidth, A-weighted
- Equivalent input noise: 29 dBA SPL (High-Performance), 30 dBA SPL (Low-Power)
- Supply current (VDD = 1.8 V, no load): 490 μA typ / 550 μA max (High-Performance); 230 μA typ / 300 μA max (Low-Power); 12 μA typ / 20 μA max (Sleep)
- THD at 105 dB SPL: 0.2% typ, 1% max
- Acoustic overload point: 120 dB SPL (10% THD)
- PSR (217 Hz, 100 mVp-p, VDD = 1.8 V): -99 dB FS (High-Performance), -98 dB FS (Low-Power)
- Wake-up time: 20 ms max from Sleep; mode switching time 10 ms max
- Digital levels: VIL max 0.3 × VDD, VIH min 0.7 × VDD; max load 85 pF at fS = 48 kHz
Features:
- Digital I²S interface with 24-bit data
- Three modes: High Performance, Low Power (AlwaysOn) and Sleep
- Wide frequency response from 60 Hz to 20 kHz
- High power supply rejection: -100 dB FS
- Sensitivity tolerance ±1 dB, suitable for microphone arrays without calibration
- Tristate SD output for stereo sharing of the data line
- Compatible with Sn/Pb and Pb-free solder processes
- RoHS/WEEE compliant
- Function-compatible with ICS-43432
Applications:
- Wearables
- Smart televisions
- Remote controls
- IoT devices
- Teleconferencing systems
- Gaming consoles
- Security systems
Package:
- 6-pin bottom-port surface-mount package, 3.50 mm × 2.65 mm × 0.98 mm (13" tape and reel)
ICS-43434 Features
| SPEC | HIGH PERFORMANCE MODE | LOW-POWER MODE |
|---|---|---|
| Sensitivity | -26 dB FS ±1 dB | -26 dB FS ±1 dB |
| SNR | 65 dBA | 64 dBA |
| Current | 490 μA | 230 μA |
| AOP | 120 dB SPL | 120 dB SPL |
| Sample Rate | 23 - 51.6 kHz | 6.25 - 18.75 kHz |
- Digital I²S interface with high precision 24-bit data
- Wide frequency response from 60 Hz to 20 kHz
- High power supply rejection: -100 dB FS
- Small 3.50 mm × 2.65 mm × 0.98 mm surface-mount package
- Compatible with Sn/Pb and Pb-free solder processes
- RoHS/WEEE compliant
ICS-43434 Applications
- Wearables
- Smart Televisions
- Remote Controls
- IoT Devices
- Teleconferencing Systems
- Gaming Consoles
- Security Systems
ICS-43434 Pin Configuration
| Pin | Name | Type | Description |
|---|---|---|---|
| 1 | WS | Input | Serial Data-Word Select for I²S Interface. |
| 2 | LR | Input | Left/Right channel select. When set low, the microphone outputs its signal in the left channel of the I²S frame. When set high, the microphone outputs its signal in the right channel. |
| 3 | GND | Ground | Ground. Connect to ground on the PCB. |
| 4 | SCK | Input | Serial Data Clock for I²S Interface. |
| 5 | VDD | Power | Power, 1.65 to 3.63 V. This pin should be decoupled to GND with a 0.1 µF capacitor. |
| 6 | SD | Output | Serial Data Output for I²S Interface. This pin tristates when not actively driving the appropriate output channel. The SD trace should have a 100 kΩ pull-down resistor to discharge the line during the time that all microphones on the bus have tristated their outputs. |
ICS-43434 Ordering Information
| MPN | Package | Temperature Range | Packing |
|---|---|---|---|
| ICS-43434 | null | -40°C to +85°C | 13" Tape & Reel |
| EV_ICS-43434-FX | null | null | null |
Variants on the same datasheet
These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.
| Part Number | Manufacturer | Package |
|---|---|---|
| ICS-43434-FX | TDK | — |
More datasheets
Ask your AI agent about the ICS-43434
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the ICS-43434 run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.