Part: GRM188R71H223KA01_ — Murata

Type: Chip Monolithic Ceramic Capacitor

Description: A general-purpose chip monolithic ceramic capacitor with X7R temperature characteristics, rated for DC 50 V, and a nominal capacitance of 22000 pF.

Operating Conditions:

• Supply voltage: DC 50 V
• Operating temperature: -55 to 125 °C

Absolute Maximum Ratings:

• Max junction/storage temperature: 125 °C

Key Specs:

• Nominal Capacitance: 22000 pF
• Capacitance Tolerance: ±10%
• Temperature Characteristics: X7R (EIA)
• Temperature Coefficient Capacitance Change: -15 to 15% (-55 to 125 °C)
• Rated Voltage: DC 50 V
• Dimensions (L x W x T): 1.6±0.1 mm x 0.8±0.1 mm x 0.8±0.1 mm

Features:

• High Dielectric Constant Type
• Suitable for General Electronic equipment

Applications:

• General Electronic equipment

Package:

• 0603 (EIA)
• φ180mm Reel PAPER W8P4 (4000 pcs./Reel)
• φ330mm Reel PAPER W8P4 (10000 pcs./Reel)

Please contact us before using our products for the applications listed below which require especially high reliability for the prevention of defects which might directly cause damage to the third party's life, body or property.

• [1] Aircraft equipment [2] Aerospace equipment [3] Undersea equipment [4] Power plant control equipment
• [5] Medical equipment [6] Transportation equipment(vehicles,trains,ships,etc.) [7] Traffic signal equipment
• [8]
• Disaster prevention / crime prevention equipment [9] Data-processing equipment
• [10] Application of similar complexity and/or reliability requirements to the applications listed in the above.

GRM188R71H223KA01J Pinout

Package Type: 0603 Chip Monolithic Ceramic Capacitor (Surface Mount, 2-Terminal)

Notes

• GRM188R71H223KA01J is a passive chip capacitor with only two terminals (anode and cathode).
• Package: 0603 (1.6 mm × 0.8 mm × 0.8 mm)
• Capacitance: 22,000 pF (22 nF) ±10%
• Rated Voltage: DC 50 V
• Dielectric: X7R (EIA) — temperature compensating type with ±15% capacitance change over −55 to +125 °C
• Termination: Outer electrodes (solder pads) on the two ends of the chip
• This is a passive component with no polarity marking requirement for X7R type, though physical orientation matters for PCB assembly.