GRM188R71C104KA01

Part: GRM188R71C104KA01_ — Murata

Type: Chip Monolithic Ceramic Capacitor

Description: A 0.1 μF, DC 16 V, ±10% tolerance, X7R dielectric chip monolithic ceramic capacitor in an 0603 (1.6x0.8x0.8 mm) package, suitable for general electronic equipment.

Operating Conditions:

• Operating temperature: -55 to 125 °C

Absolute Maximum Ratings:

• Max rated voltage: DC 16 V
• Max operating temperature: 125 °C

Key Specs:

• Nominal Capacitance: 0.1 μF
• Capacitance Tolerance: ±10%
• Rated Voltage: DC 16 V
• Temperature Characteristics: X7R (EIA)
• Capacitance Change (Temp. coeff): -15 to 15% (-55 to 125 °C, Ref. Temp. 25 °C)
• Length: 1.6±0.1 mm
• Width: 0.8±0.1 mm
• Thickness: 0.8±0.1 mm

Features:

• High dielectric constant type
• Suitable for general electronic equipment

Applications:

• General Electronic equipment

Package:

• 0603 (1.6x0.8x0.8 mm)
• Tape Carrier Packaging (φ180mm reel, 4000 pcs./Reel; φ330mm reel, 10000 pcs./Reel)

Please contact us before using our products for the applications listed below which require especially high reliability for the prevention of defects which might directly cause damage to the third party's life, body or property.

• [1] Aircraft equipment [2] Aerospace equipment [3] Undersea equipment [4] Power plant control equipment
• [5] Medical equipment [6] Transportation equipment(vehicles,trains,ships,etc.) [7] Traffic signal equipment
• [8]
• Disaster prevention / crime prevention equipment [9] Data-processing equipment
• [10] Application of similar complexity and/or reliability requirements to the applications listed in the above.

GRM188R71C104KA01 Pinout

Package Type: 0603 Chip Monolithic Ceramic Capacitor (Surface Mount, 2-Terminal)

Notes

• GRM188R71C104KA01 is a passive chip capacitor with only two terminals (no "pins" in the traditional sense).
• Dimensions: 1.6 mm (L) × 0.8 mm (W) × 0.8 mm (T) per 0603 package standard.
• Rated specifications: 0.1 μF, 16 VDC, X7R dielectric, ±10% tolerance.
• This is a surface-mount component; terminals are soldered directly to PCB pads.
• No pin diagram with numbered positions was provided in the source material; the two-terminal designation is standard for all chip capacitors in this family.