Part: GRM155R71C104KA88_ — Murata Type: Chip Monolithic Ceramic Capacitor

Description: A 0.1 μF, DC 16 V chip monolithic ceramic capacitor with X7R temperature characteristics, in a 0402 (1.0x0.5x0.5 mm) package, suitable for general electronic equipment.

Operating Conditions:

• Supply voltage: DC 16 V
• Operating temperature: -55 to 125 °C
• Capacitance change: -15 to 15% (over -55 to 125 °C)

Absolute Maximum Ratings:

• Max rated voltage: DC 16 V
• Max operating temperature: 125 °C

Key Specs:

• Nominal capacitance: 0.1 μF
• Capacitance tolerance: ±10%
• Rated voltage: DC 16 V
• Temperature characteristics: X7R (EIA)
• Temperature coefficient: -15 to 15%
• Length: 1.0±0.05 mm
• Width: 0.5±0.05 mm
• Thickness: 0.5±0.05 mm

Features:

• Chip Monolithic Ceramic Capacitor
• High Dielectric Constant Type (X7R)

Applications:

• General Electronic equipment

Package:

• 0402 (EIA) / GRM15 (Murata size code)
• 1.0±0.05 mm x 0.5±0.05 mm x 0.5±0.05 mm
• Tape Carrier Packaging (φ180mm Reel PAPER W8P2, φ180mm Reel PAPER W8P1, φ330mm Reel PAPER W8P2)

Please contact us before using our products for the applications listed below which require especially high reliability for the prevention of defects which might directly cause damage to the third party's life, body or property.

• [1] Aircraft equipment [2] Aerospace equipment [3] Undersea equipment [4] Power plant control equipment
• [5] Medical equipment [6] Transportation equipment(vehicles,trains,ships,etc.) [7] Traffic signal equipment
• [8]
• Disaster prevention / crime prevention equipment [9] Data-processing equipment
• [10] Application of similar complexity and/or reliability requirements to the applications listed in the above.

GRM155R71C104KA88 Pinout

Package Type: 0402 Chip Monolithic Ceramic Capacitor (Surface Mount)

Pinout Table

Notes

• GRM155R71C104KA88 is a passive chip capacitor in 0402 package (1.0 mm × 0.5 mm × 0.5 mm).
• This is a two-terminal surface-mount component with no pin diagram provided in the datasheet section.
• Pin numbering follows standard 0402 convention: Pin 1 is the anode (positive), Pin 2 is the cathode (negative/ground).
• Specifications: X7R dielectric, 0.1 μF nominal capacitance, ±10% tolerance, 16 VDC rated voltage.
• No functional pin diagram was included in the provided datasheet section to verify exact terminal polarity marking; standard SMD polarity conventions applied.