ESP8266EX
The ESP8266EX is an electronic component from Espressif Systems. View the full ESP8266EX datasheet below including key specifications.
Manufacturer
Espressif Systems
Category
RF and Wireless
Package
32-VFQFN Exposed Pad
Lifecycle
Not For New Designs
Key Specifications
| Parameter | Value |
|---|---|
| Current - Receiving | 50mA ~ 56mA |
| Current - Receiving | 50mA ~ 56mA |
| Current - Transmitting | 120mA ~ 170mA |
| Current - Transmitting | 120mA ~ 170mA |
| Data Rate (Max) | 54Mbps |
| Data Rate (Max) | 54Mbps |
| DigiKey Programmable | Not Verified |
| DigiKey Programmable | Not Verified |
| Frequency | 2.4GHz |
| GPIO | 8 |
| GPIO | 8 |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Power - Output | 20dBm |
| Power - Output | 20dBm |
| Protocol | 802.11b/g/n |
| RF Family/Standard | WiFi |
| RF Family/Standard | WiFi |
| Sensitivity | -91dBm |
| Sensitivity | -91dBm |
| Serial Interfaces | I2C, I2S, SPI, UART |
| Serial Interfaces | I2C, I2S, SPI, UART |
| Supplier Device Package | 32-QFN (5x5) |
| Supplier Device Package | 32-QFN (5x5) |
| Type | TxRx + MCU |
| Type | TxRx + MCU |
| Supply Voltage | 2.5V ~ 3.6V |
Overview
Part: ESP8266EX — Espressif Systems Type: Highly Integrated Wi-Fi SoC Description: A highly integrated Wi-Fi SoC solution with low power, compact design, and high stability, featuring a Tensilica L106 32-bit RISC processor, supporting 802.11 b/g/n Wi-Fi, and offering various peripheral interfaces.
Operating Conditions:
- Supply voltage: 2.5 V ~ 3.6 V
- Operating temperature: -40 °C ~ 125 °C
- CPU clock speed: up to 160 MHz
- External crystal frequency: 24 MHz to 52 MHz
Absolute Maximum Ratings:
- Max supply voltage: 3.6 V
Key Specs:
- Wi-Fi Standard: 802.11 b/g/n (HT20)
- Frequency Range: 2.4 GHz ~ 2.5 GHz (2400 MHz ~ 2483.5 MHz)
- Transmit Power (802.11b): +20 dBm
- Receive Sensitivity (802.11b, 11 Mbps): -91 dBm
- Average Operating Current: 80 mA
- Deep-sleep Current: 20 μA
- Available SRAM (Station mode, connected to AP): up to 50 kB (Heap + Data area)
- External Flash Support: up to 16 MB (Standard SPI, Dual SPI, Quad SPI)
Features:
- Integrated antenna switch, RF balun, power amplifier, low noise amplifier, filter, and power management module.
- Integrated Tensilica L106 32-bit RISC processor with on-chip SRAM.
- Supports 802.11 b/g/n (2.4 GHz) with speeds up to 72.2 Mbps.
- Two virtual Wi-Fi interfaces.
- Supports Infrastructure BSS Station mode, SoftAP mode, and promiscuous mode.
- Advanced low-power management: Active, Modem-sleep, Light-sleep, Deep-sleep modes.
- Supports WPA/WPA2 security with WEP/TKIP/AES encryption.
- Firmware upgrade via UART Download/OTA.
Applications:
- Home appliances
- Home automation
- Smart plugs, smart lights
- Industrial wireless control
- Baby monitors
- IP cameras
- Sensor networks
- Wearable electronics
- Wireless location-aware devices
- Security ID tags
- Wireless positioning system beacons
Package:
- 5 mm x 5 mm
Related Variants
The following components are covered by the same datasheet.
| Part Number | Manufacturer | Package |
|---|---|---|
| ESP8266 | Espressif Systems | — |
| ESP8266-RTOS-SDK/EN | Espressif Systems | — |
Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.
Get structured datasheet data via API
Get started free