ERS1KM561M25OT

Part: ERS1KM561M25OT

Type: Aluminum Electrolytic Capacitor

Description: High performance, high reliability aluminum electrolytic capacitor series with a rated voltage range of 6.3–120 Vdc, operating from -40 to +105°C, and an endurance of 4,000 to 10,000 hours at +105°C.

Operating Conditions:

• Supply voltage: 6.3–120 Vdc
• Operating temperature: -40 to +105°C

Absolute Maximum Ratings:

• Max supply voltage: 120 V
• Max junction/storage temperature: +105°C

Key Specs:

• Capacitance Tolerance: ±20%(M) (at 20°C, 120Hz)
• Leakage Current: I ≤ 0.01CV or 3μA, whichever is greater (at 20°C after 2 minutes)
• Dissipation Factor (tanδ) max: 0.08 (for 80-100V) to 0.22 (for 6.3V) (at 20°C, 120Hz)
• Low Temperature Impedance Ratio Z(-40°C)/Z(+20°C): 3 to 8 (at 120Hz)
• Endurance: 4,000 to 10,000 hours at 105°C
• Capacitance Change after endurance: ≤±20% (6.3,10V: ≤±30%)
• D.F. (tanδ) after endurance: ≤200% of initial specified value
• Leakage Current after endurance: ≤The initial specified value

Features:

• High performance, high reliability
• Low impedance, high ripple current, long life
• Endurance : +105°C 4,000~10,000 hours
• RoHS Compliant

Package:

• Radial Leaded Cylindrical (diameters from 5mm to 18mm)

I cannot extract a pinout table for ERS1KM561M25OT because this is an electrolytic capacitor, not an integrated circuit or component with discrete pins.

The ERS series are cylindrical aluminum electrolytic capacitors with only 2 terminals (anode and cathode), not a multi-pin package requiring a detailed pinout diagram.

Component Details for ERS1KM561M25OT:

• Part Number: ERS1KM561M25OT
• Type: Aluminum Electrolytic Capacitor
• Rated Voltage: 100 Vdc (1K)
• Capacitance: 560 µF
• Package: Φ18×30 mm (cylindrical)
• Terminals: 2 (positive and negative leads)
• tanδ: 0.08
• Impedance: 0.03 Ω (max @ 20°C, 100 kHz)
• Rated Ripple Current: 1900 mArms @ 105°C, 100 kHz

Terminal Configuration:

• Positive Lead (Anode): Longer lead
• Negative Lead (Cathode): Shorter lead (marked with stripe on sleeve)

If you need pinout information for a different component (IC, microcontroller, etc.), please provide that part number instead.