EKYB101ELL561MM25S
Aluminum Electrolytic CapacitorThe EKYB101ELL561MM25S is a aluminum electrolytic capacitor from Chemi-Con. View the full EKYB101ELL561MM25S datasheet below including key specifications.
Official EKYB101ELL561MM25S datasheet (PDF) — the source this page was extracted from.
EKYB101ELL561MM25S Key Specifications
| Parameter | Value |
|---|---|
| Applications | General Purpose |
| Capacitance | 560uF |
| Capacitance | 560 µF |
| Diameter | 18mm |
| Equivalent Series Resistance(ESR) | 27mΩ |
| Height - Seated (Max) | 1.043" (26.50mm) |
| Height - Seated (Max) | 25mm |
| Impedance | 27 mOhms |
| Lead Spacing | 0.295" (7.50mm) |
| Lifetime | 10000hrs@105℃ |
| Lifetime @ Temp. | 10000 Hrs @ 105°C |
| Mounting Type | Through Hole |
| Operating Temperature | -40°C ~ 105°C |
| Operating Temperature | -40℃~+105℃ °C |
| Package / Case | Radial, Can |
| Pin Spacing | 7.5mm |
| Polarization | Polar |
| Ripple Current | 1.135A@120Hz |
| Ripple Current @ High Frequency | 2.27 A @ 100 kHz |
| Ripple Current @ Low Frequency | 1.135 A @ 120 Hz |
| Size / Dimension | 0.709" Dia (18.00mm) |
| Tolerance | ±20% |
| Tolerance | ±20% |
| Voltage Rating | 100 V |
| Voltage Rating | 100V |
EKYB101ELL561MM25S Overview
Part: KYA series — Not specified (Manufacturer)
Type: Aluminum Electrolytic Capacitor
Description: Low impedance, high ripple current, and long-life aluminum electrolytic capacitors with an endurance of 4,000 to 10,000 hours at 105 °C, featuring a category temperature range of -40 to +105 °C and a rated voltage range of 6.3 to 100V dc.
Operating Conditions:
- Rated voltage range: 6.3 to 100V dc
- Category temperature range: -40 to +105 °C
- Endurance temperature: 105 °C
Absolute Maximum Ratings:
- Max operating temperature: 105 °C
Key Specs:
- Capacitance tolerance: ±20% (at 20 °C, 120Hz)
- Leakage current: I=0.01CV or 3μA, whichever is greater (at 20 °C after 2 minutes)
- Dissipation Factor (tan δ) max: 0.22 (at 6.3V, 20 °C, 120Hz) to 0.08 (at 100V, 20 °C, 120Hz)
- Low Temperature Impedance Ratio Z(-25 °C)/Z(+20 °C) max: 4 (at 6.3V, 120Hz) to 2 (at 16-100V, 120Hz)
- Low Temperature Impedance Ratio Z(-40 °C)/Z(+20 °C) max: 8 (at 6.3V, 120Hz) to 3 (at 25-100V, 120Hz)
- Endurance: 4,000 to 10,000 hours at 105 °C with rated ripple current
- Endurance capacitance change: ≦±30% (6.3-10V dc) or ≦±25% (16-100V dc) of initial value
- Shelf life: 500 hours at 105 °C without voltage applied
Features:
- Low impedance
- High ripple current capability
- Long life
- Newly innovative electrolyte employed to minimize impedance
- Non solvent resistant type
- RoHS2 Compliant
Applications:
Package:
- Radial lead type (φD from 5 to 18 mm)
Other Aluminum Electrolytic
- RST220UF25V019 – KNSCHA, SMD Aluminum Electrolytic Capacitor
- EEEFK0J220R – Panasonic, Surface Mount Aluminum Electrolytic Capacitor
- EEEFK1A102GP – Panasonic, Surface Mount Aluminum Electrolytic Capacitor
- EEEFK1A102P – Panasonic, Surface Mount Aluminum Electrolytic Capacitor
- EEEFK1A220R – Panasonic, Surface Mount Aluminum Electrolytic Capacitor
- EEEFK1C100R – Panasonic, Surface Mount Aluminum Electrolytic Capacitor
- EEEFK1E100R – Panasonic, Surface Mount Aluminum Electrolytic Capacitor
- EEEFK1H4R7R – Panasonic, Surface Mount Aluminum Electrolytic Capacitor
Ask your AI agent about the EKYB101ELL561MM25S
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the EKYB101ELL561MM25S run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.