EEETQV101XAP
Aluminum Electrolytic CapacitorThe EEETQV101XAP is a aluminum electrolytic capacitor from Panasonic. View the full EEETQV101XAP datasheet below including key specifications.
Official EEETQV101XAP datasheet (PDF) — the source this page was extracted from.
Manufacturer
PanasonicCategory
Aluminum ElectrolyticPackage
SMD D8 (φ6.3x7.7mm), SMD D8 (φ6.3x8.0mm, Vibration-proof)
EEETQV101XAP Key Specifications
| Parameter | Value |
|---|---|
| Rated voltage | 35 V |
| Capacitance | 100 μF, ±20 % (120 Hz, +20 °C) |
| Leakage current | I ≦ 0.01 CV (μA) after 2 minutes |
| ESR | 0.30 Ω (initial, 20 °C, 100 kHz); 6 Ω max after 2000 h endurance at -40 °C |
| Ripple current | 197 mA rms |
| tan δ | 0.16 |
| Endurance limits | capacitance change within ±30 % of initial value, tan δ ≦ 300 % of initial limit, leakage current within initial limit |
| Ripple current frequency correction factors | 0.65 (120 Hz), 0.85 (1 kHz), 0.95 (10 kHz), 1.00 (100 kHz and above) |
EEETQV101XAP Overview
Part: EEETQV101XAP — Panasonic
Type: Surface-Mount Aluminum Electrolytic Capacitor (TQ series, V type)
Description: 35 V, 100 μF surface-mount aluminum electrolytic capacitor in a φ6.3 × 7.7 mm (size code D8) case, rated for 2000 h endurance at 125 °C, with 0.30 Ω ESR and 197 mA rms ripple current.
Operating Conditions:
- Supply voltage: not applicable (rated voltage 35 V DC)
- Operating temperature: -40 to +125 °C (category temperature range)
- Endurance: 2000 h at +125 °C with rated DC voltage applied
Absolute Maximum Ratings:
- Do not apply voltage exceeding the rated voltage (35 V) when the capacitor receives impulse or pulse voltage
Key Specs:
- Rated voltage: 35 V
- Capacitance: 100 μF, ±20 % (120 Hz, +20 °C)
- Leakage current: I ≦ 0.01 CV (μA) after 2 minutes
- ESR: 0.30 Ω (initial, 20 °C, 100 kHz); 6 Ω max after 2000 h endurance at -40 °C
- Ripple current: 197 mA rms
- tan δ: 0.16
- Endurance limits: capacitance change within ±30 % of initial value, tan δ ≦ 300 % of initial limit, leakage current within initial limit
- Ripple current frequency correction factors: 0.65 (120 Hz), 0.85 (1 kHz), 0.95 (10 kHz), 1.00 (100 kHz and above)
Features:
- Endurance: 125 °C, 2000 h
- One size smaller than V-TK series with the same performance
- Low ESR (85 % lower ESR at low temperature after endurance compared with V-TP series)
- Vibration-proof version (30G guaranteed) available on request (EEETQV101XAV)
- High-temperature lead-free reflow compatible
- AEC-Q200 compliant
- RoHS compliant
Applications:
- General-purpose electronic equipment
- Automotive-grade (AEC-Q200) applications
Package:
- SMD aluminum electrolytic, size code D8: φ6.3 mm × 7.7 mm L (standard), 8.0 mm L (vibration-proof)
- Taping packaging, 900 pcs minimum
EEETQV101XAP Features
- Endurance:125 °C 2000 h
- 1 size smaller and same performance compare with V-TK series
- Low ESR (85 % low ESR in low temperature after endurance compare with V-TP series)
- Vibration-proof product (30G guaranteed) is available upon request
- AEC-Q200 compliant
- RoHS compliant
| Specifications | |||
|---|---|---|---|
| Category temp. range | -40 °C to +125 °C | -40 °C to +125 °C | -40 °C to +125 °C |
| Rated voltage range | 35 V | 35 V | 35 V |
| Capacitance range | 47 μF to 100 μF | 47 μF to 100 μF | 47 μF to 100 μF |
| Capacitance tolerance | ±20 %(120 Hz / +20°C) | ±20 %(120 Hz / +20°C) | ±20 %(120 Hz / +20°C) |
| Leakage current | I ≦ 0.01 CV(μA)After 2 minutes | I ≦ 0.01 CV(μA)After 2 minutes | I ≦ 0.01 CV(μA)After 2 minutes |
| Dissipation factor (tan δ) | Please see the attached characteristics list | Please see the attached characteristics list | Please see the attached characteristics list |
| Endurance | After the life test with DC rated working voltage at +125 °C ± 2 °C for 2000 hours, the capacitors shall meet the limits specified below. | After the life test with DC rated working voltage at +125 °C ± 2 °C for 2000 hours, the capacitors shall meet the limits specified below. | After the life test with DC rated working voltage at +125 °C ± 2 °C for 2000 hours, the capacitors shall meet the limits specified below. |
| Endurance | Capacitance change | Within ±30 %of the initial value | Within ±30 %of the initial value |
| Endurance | Dissipation factor(tan δ) | ≦ 300 %of the initial limit | ≦ 300 %of the initial limit |
| Endurance | Leakage current | Within the initial limit | Within the initial limit |
| Endurance | ESR after | Size code | D8 |
| Endurance | endurance | Initial (20 °C) | 0.30 |
| Endurance | (Ω/100 kHz) | After 2000 h (-40 °C) | 6 |
| Shelf life | stabilized at +20 °C, capacitors shall meet the limits specified in endurance. (With voltage treatment) After storage for 1000 hours at +125 °C ± 2 °C with no voltage applied and then being | stabilized at +20 °C, capacitors shall meet the limits specified in endurance. (With voltage treatment) After storage for 1000 hours at +125 °C ± 2 °C with no voltage applied and then being | stabilized at +20 °C, capacitors shall meet the limits specified in endurance. (With voltage treatment) After storage for 1000 hours at +125 °C ± 2 °C with no voltage applied and then being |
| Resistance to soldering heat | After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. | After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. | After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. |
| Resistance to soldering heat | Capacitance change | Within ±10 %of the initial value | Within ±10 %of the initial value |
| Resistance to soldering heat | Dissipation factor(tan δ) | Within the initial limit | Within the initial limit |
| Resistance to soldering heat | Leakage current | Within the initial limit | Within the initial limit |
| Frequency correction factor for ripple current | Frequency correction factor for ripple current | Frequency correction factor for ripple current | Frequency correction factor for ripple current | Frequency correction factor for ripple current |
|---|---|---|---|---|
| Frequency (Hz) | 120 | 1 k | 10 k | 100 k to |
| Correction factor | 0.65 | 0.85 | 0.95 | 1.00 |
Variants on the same datasheet
These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.
| Part Number | Manufacturer | Package |
|---|---|---|
| EEETQV101XAV | Panasonic | SMD D8 (φ6.3x8.0mm, Vibration-proof) |
| EEETQV470XAP | Panasonic | SMD 6.3x7.7mm |
| EEETQV470XAV | Panasonic | — |
Other Aluminum Electrolytic
- RST220UF25V019 – KNSCHA, SMD Aluminum Electrolytic Capacitor
- EEEFK0J220R – Panasonic, Surface Mount Aluminum Electrolytic Capacitor
- EEEFK1A102GP – Panasonic, Surface Mount Aluminum Electrolytic Capacitor
- EEEFK1A102P – Panasonic, Surface Mount Aluminum Electrolytic Capacitor
- EEEFK1A220R – Panasonic, Surface Mount Aluminum Electrolytic Capacitor
- EEEFK1C100R – Panasonic, Surface Mount Aluminum Electrolytic Capacitor
- EEEFK1E100R – Panasonic, Surface Mount Aluminum Electrolytic Capacitor
- EEEFK1H4R7R – Panasonic, Surface Mount Aluminum Electrolytic Capacitor
All Aluminum Electrolytic datasheetsAll Panasonic datasheets (64)
Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.
Ask your AI agent about the EEETQV101XAP
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the EEETQV101XAP run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.