EEEFK1J220AP

Part: FK Type V Series Capacitor

Type: Surface Mount Aluminum Electrolytic Capacitor

Description: Surface mount aluminum electrolytic capacitors with 105 °C endurance for 2000 h to 5000 h, featuring low impedance and miniaturized dimensions.

Operating Conditions:

• Rated voltage: 4 V to 50 V
• Endurance temperature: 105 °C
• Endurance duration: 2000 h (5000 h for > Ø 12.5 mm)

Absolute Maximum Ratings:

• Max rated voltage: 50 V
• Max operating temperature (endurance): 105 °C

Key Specs:

• Capacitance range: 3.3 μF to 6800 μF
• Capacitance tolerance: ±20 %
• Ripple current (max): up to 2060 mA r.m.s. (at 100 kHz, +105 °C)
• Impedance (min): down to 0.033 Ω (at 100 kHz, +20 °C)
• Dissipation factor (tan δ): 0.07 to 0.36 (at 120 Hz, +20 °C)
• Endurance: 2000 h at 105 °C (5000 h for > Ø 12.5 mm)
• Frequency correction factor for ripple current: 0.70 (50, 60 Hz) to 1.00 (100 kHz)

Features:

• Endurance: 105 °C 2000 h to 5000 h
• Low impedance (40 % to 60 % less than FC series)
• Miniaturized (30 % to 50 % less than FC series)
• Vibration-proof product is available upon request (Ø 8 mm and larger)
• RoHS compliant
• AEC-Q200

Package:

• Surface Mount (Case sizes from 4 x 5.8 mm to 18 x 16.5 mm)

• Endurance : 105 °C 2000 h to 5000 h

• Low impedance (40 % to 60 % less than FC series) Miniaturized (30 % to 50 % less than FC series)

• Vibration-proof product is available upon request. ( 0 8 mm and larger)

• RoHS compliant

• Category temperature range

• Rated voltage range

• Capacitance range

• Capacitance tolerance

• Leakage current

• Dissipation factor (tan d )

• Characteristics temperature

• Endurance

• Shelf life

• Resistance to soldering heat

• AEC-Q200

EEEFK1J220AP – Package B (Surface Mount Aluminum Electrolytic Capacitor)

Pinout

Notes

• Component Type: Surface-mount aluminum electrolytic capacitor (FK series, Type V)
• Package: B (4.0 mm diameter × 5.8±0.3 mm height)
• Rated Voltage: 63 V DC
• Capacitance: 220 µF (±20%)
• Specifications (at 105 °C, 100 kHz):
  • Ripple current: 120 mA r.m.s.
  • Impedance: 1.20 Ω
  • Dissipation factor (tan δ): 0.08
• Endurance: 105 °C, 2000 h minimum
• Marking: Black body with white text showing capacitance value (220), series identification (FK), and rated voltage code (J = 63 V DC)
• Polarity: Negative pole marked with black band on capacitor body; positive terminal is the longer lead in through-hole variants, but this is a surface-mount part with two solder pads
• Lead Configuration: Two radial leads (solder pads) on bottom of component; no internal pin numbering—pins are simply positive (+) and negative (−) terminals