CR2512-FX-1003ELF
Thick Film Chip ResistorThe CR2512-FX-1003ELF is a thick film chip resistor from Bourns. View the full CR2512-FX-1003ELF datasheet below including key specifications, electrical characteristics.
Official CR2512-FX-1003ELF datasheet (PDF) — the source this page was extracted from.
Manufacturer
BournsCategory
Thick Film Chip Resistor
Package
2512 (6332 Metric)
Lifecycle
Production (Last Updated: 3 months ago)
CR2512-FX-1003ELF Key Specifications
| Parameter | Value |
|---|---|
| Case/Package | 2512 |
| China RoHS | Non-Compliant |
| Composition | Thick Film |
| Features | Moisture Resistant |
| Height | 600 µm |
| Height - Seated (Max) | 0.030" (0.75mm) |
| Introduction Date | 2003-06-20 |
| Length | 6.3 mm |
| Lifecycle Status | Production (Last Updated: 3 months ago) |
| Max Operating Temperature | 155 °C |
| Min Operating Temperature | -55 °C |
| Mount | Surface Mount |
| Number of Terminals | 2 |
| Number of Terminations | 2 |
| Operating Temperature | -55°C ~ 155°C |
| Package / Case | 2512 (6332 Metric) |
| Packaging | Cut Tape |
| Power Rating | 1W |
| Power Rating | 1 W |
| REACH SVHC | Unaffected |
| Resistance | 100 kOhms Ω |
| Resistance | 100 kΩ |
| RoHS | Compliant |
| Size / Dimension | 0.248" L x 0.122" W (6.30mm x 3.10mm) |
| Standard Pack Qty | 4000 |
| Supplier Device Package | 2512 |
| Temperature Coefficient | ±100ppm/°C |
| Temperature Coefficient | 100 ppm/°C |
| Tolerance | 1 % |
| Tolerance | ±1% |
| Width | 3.2 mm |
| Working Voltage | 200 V |
CR2512-FX-1003ELF Overview
Part: CR2512-FX-1003ELF — Bourns
Type: Thick Film Chip Resistor (SMD)
Description: 2512-size, 1 W, ±1% tolerance, ±100 ppm/°C thick film chip resistor, 100 kΩ (1003), with 200 V max working voltage and tin-plated (RoHS compliant) terminations.
Operating Conditions:
- Supply voltage: not applicable
- Operating temperature: -55 to +155 °C (CR2512), derated to zero load at +155 °C
- Max. working voltage: 200 V
- Power rating: 1 W at 70 °C
Absolute Maximum Ratings:
- Max. overload voltage: 400 V
- Max. overload current: 5 A
Key Specs:
- Power rating: 1 W @ 70 °C
- Resistance tolerance: ±1 % (F) for this part
- TCR: ±100 ppm/°C (X code; 10 Ω ≤ R ≤ 1 MΩ, ±1 %)
- Max. working voltage: 200 V; max. overload voltage: 400 V
- Rated current: 2 A; max. overload current: 5 A
- Zero-ohm jumper resistance: 50 mΩ max.
- Dielectric withstanding voltage: 500 V, 1 minute
- Insulation resistance: ≥ 1 GΩ at 100 V, 1 minute
Features:
- RoHS compliant
- Tight tolerance of bottom electrode width
- 1 % and 5 % tolerance options
- Three-layer termination with nickel barrier helps prevent leaching and provides excellent solderability
- Tape and reel packaging (E: 4,000 pcs embossed tape on 7-inch reel for CR2512)
Applications:
- General-purpose surface-mount resistor applications
Package:
- 2512 chip size: 6.30 × 3.20 mm (L × W), 0.60 mm thick
- Embossed tape, 4,000 pcs per 7-inch reel
CR2512-FX-1003ELF Features
- ■ RoHS compliant*
- ■ Tight tolerance of bottom electrode width
- ■ 1 % and 5 % tolerance options
- ■ Three layer termination process with nickel barrier helps prevent leaching and provides excellent solderability
CR2512-FX-1003ELF Electrical Characteristics
| Characteristic | Model No. - CR01005 | Model No. - CR0201 | Model No. - CR0402 | Model No. - CR0603 | Model No. - CR0805 | Model No. - CR1206 | Model No. - CR2010 | Model No. - CR2512 |
|---|---|---|---|---|---|---|---|---|
| Power Rating @70 °C | 1/32W | 1/20W | 1/16W | 1/10W | 1/8W | 1/4W | 1/2W | 1W |
| Operating Temp. Range | -55 °C to +125 °C | -55 °C to +125 °C | -55 °C to +155 °C | -55 °C to +155 °C | -55 °C to +155 °C | -55 °C to +155 °C | -55 °C to +155 °C | -55 °C to +155 °C |
| Derated to Zero Load@ | +125 °C | +125 °C | +155 °C | +155 °C | +155 °C | +155 °C | +155 °C | +155 °C |
| Max. Working Voltage | 15 V | 30 V | 50 V | 75 V | 150 V | 200 V | 200 V | 200 V |
| Max. Overload Voltage | 30 V | 50 V | 100 V | 150 V | 300 V | 400 V | 400 V | 400 V |
| Resistance Tolerance | ±1 %, ±5% | ±1 %, ±5% | ±1 %, ±5% | ±1 %, ±5% | ±1 %, ±5% | ±1 %, ±5% | ±1 %, ±5% | ±1 %, ±5% |
| Temperature Coefficient ±1% (E24 & E96 Series) | 10 Ω ≤ R<100 Ω ±300 ppm/°C 100 Ω ≤ R<1 MΩ ±200 ppm/°C | 1 Ω ≤ R<10 Ω -200~+600 ppm/°C 10 Ω ≤ R ≤ 3 MΩ ±200 ppm/°C | 1 Ω ≤ R<10 Ω -200~+500 ppm/°C 10 Ω ≤ R ≤ 1 MΩ ±100 ppm/°C 1 MΩ<R ≤ 10 MΩ ±200 ppm/°C | 1 Ω ≤ R<10 Ω ±200 ppm/°C 10 Ω ≤ R ≤ 1 MΩ ±100 ppm/°C 1 MΩ<R ≤ 10 MΩ ±200 ppm/°C | 1 Ω ≤ R<10 Ω ±200 ppm/°C 10 Ω ≤ R ≤ 1 MΩ ±100 ppm/°C 1 MΩ<R ≤ 10 MΩ ±200 ppm/°C | 1 Ω ≤ R<10 Ω ±200 ppm/°C 10 Ω ≤ R ≤ 1 MΩ ±100 ppm/°C 1 MΩ<R ≤ 10 MΩ ±200 ppm/°C | 1 Ω ≤ R<10 Ω ±200 ppm/°C 10 Ω ≤ R ≤ 1 MΩ ±100 ppm/°C 1 MΩ<R ≤ 10 MΩ ±200 ppm/°C | 1 Ω ≤ R<10 Ω ±200 ppm/°C 10 Ω ≤ R ≤ 1 MΩ ±100 ppm/°C 1 MΩ<R ≤ 10 MΩ ±200 ppm/°C |
| Temperature Coefficient ±5% (E24 Series) | 10 Ω ≤ R<100 Ω ±300 ppm/°C 100 Ω ≤ R ≤ 1 MΩ ±200 ppm/°C | 1 Ω ≤ R<10 Ω -200~+600 ppm/°C 10 Ω ≤ R ≤ 10 MΩ ±200 ppm/°C | 1 Ω ≤ R<10 Ω -200~+500 ppm/°C 10 Ω ≤ R ≤ 10 MΩ ±200 ppm/°C 10 MΩ<R ≤ 20 MΩ ±400 ppm/°C | 1 Ω ≤ R<10 Ω ±400 ppm/°C 10 Ω ≤ R ≤ 10 MΩ ±200 ppm/°C 10 MΩ<R ≤ 20 MΩ ±400 ppm/°C | 1 Ω ≤ R<10 Ω ±400 ppm/°C 10 Ω ≤ R ≤ 10 MΩ ±200 ppm/°C 10 MΩ<R ≤ 20 MΩ ±400 ppm/°C | 1 Ω ≤ R<10 Ω ±400 ppm/°C 10 Ω ≤ R ≤ 10 MΩ ±200 ppm/°C 10 MΩ<R ≤ 20 MΩ ±400 ppm/°C | 1 Ω ≤ R<10 Ω ±400 ppm/°C 10 Ω ≤ R ≤ 10 MΩ ±200 ppm/°C 10 MΩ<R ≤ 20 MΩ ±400 ppm/°C | 1 Ω ≤ R<10 Ω ±400 ppm/°C 10 Ω ≤ R ≤ 10 MΩ ±200 ppm/°C 10 MΩ<R ≤ 20 MΩ ±400 ppm/°C |
| Zero Ohm Jumper | 50 milliohms max. | 50 milliohms max. | 50 milliohms max. | 50 milliohms max. | 50 milliohms max. | 50 milliohms max. | 50 milliohms max. | 50 milliohms max. |
| Rated Current | 0.5 A | 0.5 A | 1 A | 1 A | 2 A | 2 A | 2 A | 2 A |
| Max. Overload Current | 1 A | 1 A | 2.5 A | 2.5 A | 5 A | 5 A | 5 A | 5 A |
Variants on the same datasheet
These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.
More datasheets
Ask your AI agent about the CR2512-FX-1003ELF
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the CR2512-FX-1003ELF run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.