Part: CL10A475KO8NNNC — SAMSUNG Type: Multilayer Ceramic Capacitor (MLCC) Description: A surface-mounted multilayer ceramic capacitor available in various sizes, capacitance values, and voltage ratings, featuring low ESR and suitable for general electronic circuits.

Operating Conditions:

• Operating temperature: -55 to +125 °C (for Class I and Class II X7R)
• Operating temperature: -55 to +85 °C (for Class II X5R)
• Operating temperature: -30 to +85 °C (for Class II Y5V)

Absolute Maximum Ratings:

• Max rated voltage: 3000 Vdc

Key Specs:

• Capacitance range: 0.1 pF to 130,000 pF (0.13 μF)
• Rated voltage range: 4 Vdc to 3000 Vdc
• Capacitance tolerance: ±0.05 pF to +80/-20%
• Temperature characteristics: C0G (0 ± 30 ppm/°C), X5R (±15%), X7R (±15%), Y5V (+22/-82%)
• Termination plating: Sn_100%
• Inner electrode material: Ni, Cu, or Pd (historically)
• Outer termination layers: Cu or Ag, Ni plating, SnPb or Sn plating

Features:

• Miniature Size
• Wide Capacitance and Voltage Range
• Tape & Reel for Surface Mount Assembly
• Low ESR

Applications:

• General Electronic Circuit

Package:

• 0201 (0.6 x 0.3 mm)
• 0402 (1.0 x 0.5 mm)
• 0603 (1.6 x 0.8 mm)
• 0805 (2.0 x 1.25 mm)
• 1206 (3.2 x 1.6 mm)
• 1210 (3.2 x 2.5 mm)
• 1812 (4.5 x 3.2 mm)
• 2220 (5.7 x 5.0 mm)

CL10A475KO8NNNC Pinout

Package Type: EIA 020 (0603) – Two-Terminal Passive Component

Component Information

This is a Multilayer Ceramic Capacitor (MLCC), not an integrated circuit. It is a passive two-terminal surface-mount device with no "pins" in the traditional sense.

Part Number Decoding (CL10A475KO8NNNC)

• CL – Samsung Multilayer Ceramic Capacitor
• 10 – Size: 1.6 × 0.8 mm (EIA 0603)
• A – Temperature Characteristic: X5R (Class II, ±15%, –55 to +85°C)
• 475 – Nominal Capacitance: 4.7 µF (47 × 10⁵ pF)
• K – Capacitance Tolerance: ±10%
• O – Rated Voltage: 16 V DC
• 8 – Thickness Option: 0.8 ± 0.10 mm
• NNN – Product & Plating / Samsung Control Code / Reserved
• C – Packaging Type: Paper Tape, 7" Reel

Notes

• This is a passive capacitor component with only two connection points (positive and negative terminals).
• No pin diagram with numbered pins exists for this component—it is a two-terminal SMD capacitor.
• Dimensions per EIA 0603 standard: L = 1.6 ± 0.1 mm, W = 0.8 ± 0.1 mm, T = 0.8 ± 0.1 mm.
• Rated for 16 V DC with X5R temperature characteristic (±15% capacitance change over –55 to +85°C).
• Capacitance value: 4.7 µF ±10%

When designing printed circuit boards, the shape and size of the lands must allow for the proper amount of solder on the capacitor. The amount of solder at the end terminations has a direct effect on the crack. The crack in MLCC will be easily occurred by the tensile stress which was due to too much amount of solder. In contrast, if too little solder is applied, the termination strength will be insufficiently. Use the following illustrations as guidelines for proper land design.

Recommendation of Land Shape and Size