Part: CGA Series — TDK Corporation

Type: Multilayer Ceramic Chip Capacitors

Description: RoHS compliant multilayer ceramic chip capacitors for automotive applications, available in various EIA case sizes from CC0201 to CC2220, with rated voltages from 4V to 630V DC and a wide range of temperature characteristics including C0G, NP0, X7R, X7S, X7T, X8R, and X8L.

Operating Conditions:

• Supply voltage: 4V–630V DC
• Operating temperature: -55 to +150°C
• Capacitance range: 0.5 pF to 2.2 μF (example values)

Absolute Maximum Ratings:

• Max supply voltage: 630V DC
• Max junction/storage temperature: 150°C

Key Specs:

• Rated Voltage: 4V, 6.3V, 10V, 16V, 25V, 35V, 50V, 75V, 100V, 250V, 450V, 630V DC
• Temperature Characteristics:
  • C0G: 0±30ppm/°C over -55 to +125°C
  • NP0: 0±30ppm/°C over -55 to +150°C
  • X7R: ±15% over -55 to +125°C
  • X7S: ±22% over -55 to +125°C
  • X7T: +22,-33% over -55 to +125°C
  • X8R: ±15% over -55 to +150°C
  • X8L: +15,-40% over -55 to +150°C
• Capacitance Tolerance: ±0.25pF, ±0.5pF, ±5%, ±10%, ±20%
• Insulation Resistance: 10,000MΩ or 500MΩ·μF min. (10,000MΩ or 100MΩ·μF min. for 16V DC and lower)
• Case Sizes (L x W): 0.6x0.3mm (CC0201) to 5.7x5.0mm (CC2220)

Features:

• RoHS compliant
• Test conditions based on AEC-Q200 for automotive application
• Wide range of temperature characteristics
• Multiple packaging styles (178mm reel with 2mm, 4mm, or 8mm pitch)

Applications:

• Automotive application

Package:

• CC0201 (0.6 x 0.3 mm)
• CC0402 (1.0 x 0.5 mm)
• CC0603 (1.6 x 0.8 mm)
• CC0805 (2.0 x 1.25 mm)
• CC1206 (3.2 x 1.6 mm)
• CC1210 (3.2 x 2.5 mm)
• CC1812 (4.5 x 3.2 mm)
• CC2220 (5.7 x 5.0 mm)

CGA1 Multilayer Ceramic Chip Capacitor

Package Type: CC0201 (0.6 mm × 0.3 mm)

Pinout

Notes

• CGA1 is a two-terminal surface-mount ceramic chip capacitor in the CC0201 package (0.6 mm length × 0.3 mm width).
• This component is a passive capacitor with no active pins; the two terminals are the positive and negative electrodes.
• Tape packaging only: CGA1 is applicable to tape packaging only (not bulk packaging).
• Inspection: External appearance inspection for CGA1 requires magnifying glass at 10× magnification (higher than other CGA variants which use 3×).
• Robustness test: A reduced pushing force of 2N is applied for CGA1 and CGA2 types (versus 17.7N for larger variants).
• Available in multiple temperature characteristics (C0G, NP0, X7R, X7S, X7T, X8R, X8L) and rated voltages (4V to 630V DC depending on dielectric type).