Skip to main content

We use cookies to understand how you use our site and improve your experience. See our Privacy Policy.

CAB450M12XM3

Silicon Carbide Half-Bridge MOSFET Module

The CAB450M12XM3 is a silicon carbide half-bridge mosfet module from Wolfspeed. View the full CAB450M12XM3 datasheet below including key specifications.

Official CAB450M12XM3 datasheet (PDF) — the source this page was extracted from.

Manufacturer

Wolfspeed

Category

Silicon Carbide Half-Bridge MOSFET Module

Package

Module

Lifecycle

Production (Last Updated: 6 years ago)

CAB450M12XM3 Key Specifications

ParameterValue
Case/PackageModule
China RoHSCompliant
Configuration2 N-Channel (Half Bridge)
Continuous Drain Current (ID)450 A
Continuous Drain Current450A
Current Rating450 A
Drain to Source Breakdown Voltage1.2 kV
Drain to Source Resistance3.7 mΩ
Drain to Source Voltage (Vds)1.2 kV
Drain-Source Voltage (Vdss)1200V (1.2kV)
Gate Charge (Qg)1330nC @ 15V
Input Capacitance (Ciss)38000pF @ 800V
Lifecycle StatusProduction (Last Updated: 6 years ago)
Manufacturer Lifecycle StatusPRODUCTION (Last Updated: 6 years ago)
Max Junction Temperature (Tj)175 °C
Max Operating Temperature175 °C
Min Breakdown Voltage1.2 kV
Min Operating Temperature-40 °C
Mounting TypeChassis Mount
Number of Channels2
Number of Elements2
Number of Terminals11
Operating Temperature-40°C ~ 175°C (TJ)
Package / CaseModule
PackagingBulk
Power (Max)850W
Power Dissipation50 mW
Rds(on)3.7mOhm @ 450A, 15V Ω
REACH SVHCUnaffected
RoHSCompliant
Standard Pack Qty1
Supplier Device PackageModule
Diode TechnologySilicon Carbide (SiC)
Gate Threshold Voltage3.6V @ 132mA

CAB450M12XM3 Overview

Part: CAB450M12XM3 — Wolfspeed

Type: Silicon Carbide Half-Bridge MOSFET Power Module

Description: 1200 V, 450 A half-bridge SiC MOSFET module with 2.6 mΩ typical RDS(on), 6.7 nH stray inductance and 175 °C virtual junction operation.

Operating Conditions:

  • Drain-source voltage: 1200 V (TC = 25 °C)
  • Operational virtual junction temperature: -40 to 175 °C
  • Case temperature: -40 to 125 °C
  • Gate-source voltage: -4/+15 V recommended static operation

Absolute Maximum Ratings:

  • Drain-source voltage: 1200 V
  • Gate-source voltage (transient): -8 to +19 V
  • DC continuous drain current: 450 A (VGS = 15 V, TC = 25 °C, TVJ ≤ 175 °C)
  • Power dissipation: 1670 W (TC = 25 °C, TVJ ≤ 175 °C)
  • Operational virtual junction temperature: 175 °C

Key Specs:

  • RDS(on) (MOSFET only): 2.6 mΩ typ, 3.4 mΩ max (VGS = 15 V, ID = 450 A, 25 °C); 4.7 mΩ typ at TVJ = 175 °C
  • Gate threshold voltage: 1.8 V min, 2.5 V typ, 3.6 V max (VDS = VGS, IDS = 132 mA)
  • IDSS: 5 μA typ, 200 μA max (VGS = 0 V, VDS = 1200 V)
  • Switching energy at 25 °C (VDD = 600 V, ID = 450 A, RG-ON = 4.0 Ω): EOn 25.4 mJ, EOff 7.51 mJ
  • Total gate charge: 1300 nC; Ciss 38.0 nF
  • Body diode VSD: 4.7 V typ at 25 °C (VGS = -4 V, ISD = 450 A)
  • Reverse recovery charge: 7.2 μC (TVJ = 175 °C)
  • Thermal resistance, junction to case: 0.094 °C/W
  • Stray inductance: 6.7 nH; case isolation 4.0 kV AC, 1 min
  • NTC: 4700 Ω at 25 °C, ±1%, B25/85 = 3435 K

Features:

  • High power density footprint
  • Low-inductance (6.7 nH) design
  • 175 °C junction temperature operation
  • Conduction-optimized third generation SiC MOSFET technology
  • Silicon nitride insulator and copper baseplate
  • Direct bus bar connection terminal layout
  • Isolated integrated NTC temperature sensor
  • Dedicated high-side Kelvin-drain pin for gate driver overcurrent protection

Applications:

  • Motor and motion control
  • Uninterruptible power supplies
  • Vehicle fast chargers
  • Smart-grid / grid-tied distributed generation
  • E-mobility
  • Traction drives

Package:

  • XM3 half-bridge power module, approx. 80 × 53 mm (mounting dimensions A1/A2), 175 g, M4 baseplate bolts and M5 power terminal bolts

CAB450M12XM3 Features

  • High Power Density Footprint
  • Low-Inductance (6.7 nH) Design
  • High Junction Temperature (175 °C) Operation
  • Implements Conduction-Optimized Third Generation SiC MOSFET Technology
  • Silicon Nitride Insulator and Copper Baseplate
  • 1200 V Drain-Source Voltage

CAB450M12XM3 Applications

  • Motor & Motion Control
  • Uninterruptible Power Supplies
  • Vehicle Fast Chargers
  • Smart-Grid / Grid-Tied Distributed Generation
  • E-mobility
  • Traction Drives

CAB450M12XM3 Typical Application

  • Motor & Motion Control
  • Uninterruptible Power Supplies
  • Vehicle Fast Chargers
  • Smart-Grid / Grid-Tied Distributed Generation
  • E-mobility
  • Traction Drives

CAB450M12XM3 Package Information

B

1

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

TOLERANCES:

FRACTIONAL

ANGULAR: MACH

BEND

TWO PLACE DECIMAL

THREE PLACE DECIMAL

INTERPRET GEOMETRIC

TOLERANCING PER:

DRAWN

CHECKED

ENG APPR.

MFG APPR.

Q.A.

SECTION E-E

Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Ask your AI agent about the CAB450M12XM3

Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.

claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp

Then ask: "Can the CAB450M12XM3 run from my 12 V rail? Check it against the datasheet limits."

Create a free account $2 of usage every month, no card needed.