Part: Jiangsu Zhenhua Xinyun Electronics Co., Ltd. CA45-A-35V-0.47μF-K

Type: Chip Solid Electrolytic Tantalum Capacitor

Description: 35V, 0.47μF chip solid electrolytic tantalum capacitor with ±10% tolerance, operating from -55°C to 125°C, featuring molded packaging and stable reliability.

Operating Conditions:

• Supply voltage: 35V (DC or pulsating circuits)
• Operating temperature: -55°C to 125°C (derated above 85°C)
• Nominal Capacitance Tolerance: ±10% (at 25°C, 120Hz)

Absolute Maximum Ratings:

• Max supply voltage: 40V (Surge Voltage)
• Max continuous current: Not applicable
• Max junction/storage temperature: 125°C

Key Specs:

• Rated Voltage: 35V
• Surge Voltage: 40V
• Capacitance: 0.47μF
• Capacitance Tolerance: ±10% (at 25°C, 120Hz)
• Dissipation Factor (tanδ): ≤4%
• Leakage Current: ≤0.5 μA
• Equivalent Series Resistance (ESR): ≤18 Ω (at 100KHz)
• Operating Temperature Range: -55°C to 125°C

Features:

• Molded packaging and chip leads
• Good sealing, light weight
• Excellent electrical performance
• Stable reliability

Applications:

• Mobile communications
• Cameras
• Program-controlled switches
• Computers
• Automotive electronics

Package:

• Case A (3.2±0.2 mm L)

This product features molded packaging and chip leads, offering good sealing, light weight, excellent electrical performance, and stable reliability. It is suitable for DC or pulsating circuits in various electronic devices such as mobile communications, cameras, program-controlled switches, computers, and automotive electronics.

CA45-A-35V-0.47UF-K Pinout

Package: CASE-A-3216-16 (Chip Tantalum Electrolytic Capacitor, 2-pin)

Notes

• This is a polarized chip tantalum capacitor with only 2 leads (anode and cathode).
• Rated Voltage: 35V DC
• Capacitance: 0.47 µF (±10% tolerance, K-grade)
• Surge Voltage: 40V maximum
• Operating Temperature Range: −55°C to +125°C (derated above 85°C)
• Key Electrical Parameters: Leakage current ≤0.5 µA; ESR ≤18 Ω @ 100 kHz; Dissipation factor ≤4%
• Critical: Reverse voltage is strictly forbidden. Polarity must be observed during soldering and operation. If reverse voltage is accidentally applied, the capacitor must be discarded.
• Soldering: Reflow soldering recommended at 260°C peak, max 30 seconds within 5°C of peak. Manual soldering iron <260°C, <4 seconds. Avoid highly active fluxes.