C5736265
The C5736265 is an electronic component from Espressif Systems. View the full C5736265 datasheet below including electrical characteristics, absolute maximum ratings.
Manufacturer
Espressif Systems
Category
RF Transceiver Modules and Modems
Package
SMD-53P
Overview
Part: ESP32-C6-MINI-1 / ESP32-C6-MINI-1U
Type: Wireless MCU Module
Description: 2.4 GHz Wi-Fi 6 (802.11ax), Bluetooth 5 (LE), Zigbee, and Thread (802.15.4) module with a RISC-V 32-bit single-core processor, 4 MB embedded flash, and 22 GPIOs.
Operating Conditions:
- Supply voltage: 3.0–3.6 V
- Operating temperature: -40 to 85 °C (suffix-dependent — see Table 11 for grade-specific ranges)
Absolute Maximum Ratings:
- Max supply voltage: 3.6 V
- Max junction/storage temperature: 105 °C
Key Specs:
- Pin Capacitance (C IN): 2 pF (Typ)
- High-level Input Voltage (V IH): 0.75 × VDD to VDD + 0.3 V
- Low-level Input Voltage (V IL): -0.3 to 0.25 × VDD V
- High-level Input Current (I IH): 50 nA (Max)
- Low-level Input Current (I IL): 50 nA (Max)
- High-level Output Voltage (V OH): 0.8 × VDD V (Min)
- Low-level Output Voltage (V OL): 0.1 × VDD V (Max)
- High-level Pull Current (I OH): 40 mA (Typ, VDD = 3.3 V, VOH >= 2.64 V, PAD_DRIVER = 3)
- Low-level Sink Current (I OL): 28 mA (Typ, VDD = 3.3 V, VOL = 0.495 V, PAD_DRIVER = 3)
- Pull-up Resistor (R PU): 45 kΩ (Typ)
- Pull-down Resistor (R PD): 45 kΩ (Typ)
Features:
- 2.4 GHz Wi-Fi 6 (802.11 ax)
- Bluetooth® 5 (LE)
- Zigbee, and Thread (802.15.4)
- Built-in ESP32-C6 series chip, RISC-V 32-bit single-core processor
- 4 MB embedded flash
- 22 GPIOs, rich peripherals
- On-board PCB antenna or external antenna connector
Package:
- 53-pin module
Pin Configuration
The module has 53 pins. For detailed descriptions, please refer to Table 3 Pin Definitions.
For peripheral pin assignments, please refer to the ESP32-C6 Series Datasheet.
Table 3: Pin Definitions
| Name | No. | Type 1 | Function |
|---|---|---|---|
| GND | 1, 2, 11, 14, 36 ∼ 53 | P | Ground |
| 3V3 | 3 | P | Power Supply |
| NC | 4 | - | Not Connected |
See next page
Table 3 Continued
| Name | No. | Type 1 | Function |
|---|---|---|---|
| IO2 | 5 | I/O/T | GPIO2, LP_GPIO2, LP_UART_RTSN, ADC1_CH2, FSPIQ |
| IO3 | 6 | I/O/T | GPIO3, LP_GPIO3, LP_UART_CTSN, ADC1_CH3 |
| NC | 7 | - | Not Connected |
| EN | 8 | I | High: Chip enabled; Low: Chip disabled; Note: EN pin must not be left floating. |
| IO4 | 9 | I/O/T | MTMS, GPIO4, LP_GPIO4, LP_UART_RXD, ADC1_CH4, FSPIHD |
| IO5 | 10 | I/O/T | MTDI, GPIO5, LP_GPIO5, LP_UART_TXD, ADC1_CH5, FSPIWP |
| IO0 | 12 | I/O/T | GPIO0, XTAL_32K_P, LP_GPIO0, LP_UART_DTRN, ADC1_CH0 |
| IO1 | 13 | I/O/T | GPIO1, XTAL_32K_N, LP_GPIO1, LP_UART_DSRN, ADC1_CH1 |
| IO6 | 15 | I/O/T | MTCK, GPIO6, LP_GPIO6, LP_I2C_SDA, ADC1_CH6, FSPICLK |
| IO7 | 16 | I/O/T | MTDO, GPIO7, LP_GPIO7, LP_I2C_SCL, FSPID |
| IO12 | 17 | I/O/T | GPIO12, USB_D- |
| IO13 | 18 | I/O/T | GPIO13, USB_D+ |
| IO14 | 19 | I/O/T | GPIO14 |
| IO15 | 20 | I/O/T | GPIO15 |
| NC | 21 | - | Not Connected |
| IO8 | 22 | I/O/T | GPIO8 |
| IO9 | 23 | I/O/T | GPIO9 |
| IO18 | 24 | I/O/T | GPIO18, SDIO_CMD, FSPICS2 |
| IO19 | 25 | I/O/T | GPIO19, SDIO_CLK, FSPICS3 |
| IO20 | 26 | I/O/T | GPIO20, SDIO_DATA0, FSPICS4 |
| IO21 | 27 | I/O/T | GPIO21, SDIO_DATA1, FSPICS5 |
| IO22 | 28 | I/O/T | GPIO22, SDIO_DATA2 |
| IO23 | 29 | I/O/T | GPIO23, SDIO_DATA3 |
| RXD0 | 30 | I/O/T | U0RXD, GPIO17, FSPICS1 |
| TXD0 | 31 | I/O/T | U0TXD, GPIO16, FSPICS0 |
| NC | 32 | - | Not Connected |
| NC | 33 | - | Not Connected |
| NC | 34 | - | Not Connected |
| NC | 35 | - | Not Connected |
1 P: Power; I: Input; O: Output; T: Can be set to high impedance.
Electrical Characteristics
The electrical characteristics data provided in this section are for reference only and may be updated in future releases.
Absolute Maximum Ratings
Exceeding the values in Table 10 Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in Table 11 Recommended Operating Conditions is not implied. Long-term exposure to absolute maximum rating conditions may affect module reliability.
Table 10: Absolute Maximum Ratings
| Symbol | Parameter | Min | Max | Unit |
|---|---|---|---|---|
| VDD33 | Supply Pin Voltage | - 0.3 | 3.6 | V |
| T STORE | Storage Temperature | - 40 | 105 | °C |
Recommended Operating Conditions
Table 11: Recommended Operating Conditions
| Symbol | Parameter | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| VDD33 | Supply Pin Voltage | 3.0 | 3.3 | 3.6 | V |
| I VDD | Supply Current from External Power Supply | 0.5 | - | - | A |
| T A | Operating Ambient Temperature 85 | °C Version Module - 40 | - | 85 | °C |
| T A | Operating Ambient Temperature 85 | 105 °C Version Module | - | 105 | °C |
Related Variants
The following components are covered by the same datasheet.
| Part Number | Manufacturer | Package |
|---|---|---|
| ESP32-C6-MINI-1 | Espressif Systems | — |
| ESP32-C6-MINI-1U | Espressif Systems | — |
Get structured datasheet data via API
Get started free