C2443412
The C2443412 is an electronic component. View the full C2443412 datasheet below including specifications and datasheet sections.
Overview
Part: M24512-W, M24512-R, M24512-DF — STMicroelectronics
Type: Serial I²C Bus EEPROM
Description: 512-Kbit (64 Kbyte) I²C-compatible EEPROM with 128-byte page size, operating from 1.7 V to 5.5 V with a 1 MHz clock, and featuring more than 4 million write cycles and 200-years data retention.
Operating Conditions:
- Supply voltage: 1.7 V to 5.5 V (M24512-DF), 1.8 V to 5.5 V (M24512-R), 2.5 V to 5.5 V (M24512-W)
- Operating temperature: -40 °C to +85 °C
- Clock frequency: 1 MHz (or less)
Absolute Maximum Ratings:
- Max junction/storage temperature: +85 °C (operating temperature range)
Key Specs:
- Memory size: 512 Kbit (64 Kbyte)
- Page size: 128 byte
- Bus clock frequency: 1 MHz (max)
- Byte write time: 5 ms (within)
- Page write time: 5 ms (within)
- Write cycles: >4 million
- Data retention: >200 years
Features:
- Compatible with 1 MHz, 400 kHz, 100 kHz I²C bus modes
- Random and sequential read modes
- Write protect of the whole memory array
- Enhanced ESD/latch-Up protection
- Additional write lockable identification page (M24512-D order codes)
- Error Correction Code (ECC) for improved read reliability
Applications:
Package:
- SO8 ECOPACK2
- TSSOP8 ECOPACK2
- UFDFPN8 ECOPACK2
- WLCSP ECOPACK2
- Unsawn wafer
Features
- Compatible with following I 2 C bus modes:
- -1 MHz
- -400 kHz
- -100 kHz
- Memory array:
- -512 Kbit (64 Kbyte) of EEPROM
- -Page size: 128 byte
- -Additional write lockable page (M24512-D order codes)
- Single supply voltage and high speed:
- -1 MHz clock from 1.7 V to 5.5 V
- Write time:
- -Byte write within 5 ms
- -Page write within 5 ms
- Operating temperature range:
- --40 °C up to +85 °C
- Random and sequential read modes
- Write protect of the whole memory array
- Enhanced ESD/latch-Up protection
- More than 4 million write cycles
- More than 200-years data retention
- Packages:
- -SO8 ECOPACK2 ®
- -TSSOP8 ECOPACK2 ®
- -UFDFPN8 ECOPACK2 ®
- -WLCSP ECOPACK2 ®
- -Unsawn wafer (each die is tested)
Package Information
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK ® packages, depending on their level of environmental compliance. ECOPACK ® specifications, grade definitions and product status are available at: www.st.com. ECOPACK ® is an ST trademark.
For die information concerning the M24512-W delivered in unsawn wafer, please contact your nearest ST Sales Office.
Related Variants
The following components are covered by the same datasheet.
Get structured datasheet data via API
Get started free