C24123

Part: CAT24C512 — onsemi

Type: Serial EEPROM

Description: 512-Kb I2C serial EEPROM, internally organized as 65,536 words of 8 bits, supporting Standard (100 kHz), Fast (400 kHz), and Fast-Plus (1 MHz) I2C protocols, with a 128-byte page write buffer.

Operating Conditions:

• Supply voltage: 1.8 V to 5.5 V
• Operating temperature: -40 °C to +85 °C, -40 °C to +125 °C
• Max clock frequency: 1 MHz (Fast-Plus I2C)

Absolute Maximum Ratings:

• Max voltage on any pin: +6.5 V (with respect to ground)
• Max storage temperature: +150 °C

Key Specs:

• Memory organization: 65,536 words of 8 bits
• Endurance: 1,000,000 Program/Erase Cycles
• Data Retention: 100 Years
• Max Read Current (ICCR): 1 mA (fSCL = 400 kHz/1 MHz)
• Max Write Current (ICCW): 2.5 mA (VCC = 5.5 V)
• Max Standby Current (ISB): 5 mA (TA = -40 °C to +125 °C)
• Max Clock Frequency (FSCL): 1,000 kHz (Fast-Plus)
• Write Cycle Time (tWR): 5 ms

Features:

• 1.8 V to 5.5 V Supply Voltage Range
• Supports Standard, Fast and Fast-Plus I2C Protocol
• 128-Byte Page Write Buffer
• Hardware Write Protection for Entire Memory
• On-Chip ECC (Error Correction Code)
• Low Power CMOS Technology
• 100 Year Data Retention, 1,000,000 Program/Erase Cycles

Package:

• SOIC-8
• TSSOP-8
• UDFN8
• WLCSP-8

• 1.8 V to 5.5 V Supply Voltage Range
• Supports Standard, Fast and Fast -Plus I 2 C Protocol
• 128 -Byte Page Write Buffer
• Schmitt Triggers and Noise Suppression Filters on I 2 C Bus Inputs (SCL and SDA)
• Hardware Write Protection for Entire Memory
• Low Power CMOS Technology
• 100 Year Data Retention
• 1,000,000 Program/Erase Cycles
• Industrial and Extended Temperature Range
• These Devices are Pb -Free, Halogen Free/BFR Free and are RoHS Compliant
• 8 -pin, SOIC, TSSOP, 8 -pad UDFN and 8 -ball WLCSP Packages

Figure 1. Functional Symbol

Figure 1. Functional Symbol

TSSOP -8 Y SUFFIX CASE 948AL

SOIC -8 X SUFFIX CASE 751BE

SOIC -8 W SUFFIX CASE 751BD

WLCSP -8 C8A SUFFIX CASE 567JL

Pin A1

Reference

For the location of Pin 1, please consult the corresponding package drawing.

WLCSP (C8A) (Top View)

Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected.

1. The DC input voltage on any pin should not be lower than -0.5 V or higher than V CC + 0.5 V. During transitions, the voltage on any pin may undershoot to no less than -1.5 V or overshoot to no more than V CC + 1.5 V, for periods of less than 20 ns.